CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    914 Compact Wheel Loader
    View Product
    988 XE Wheel Loader
    View Product Remove
    986 Wheel Loader
    View Product Remove

    Engine
    Maximum Gross Power 110 HP - -
    Rated Net Power - Rated Engine Speed 2200 r/min - -
    Maximum Gross Power - Rated Engine Speed 1800 r/min - -
    Rated Net Power - SAE J1349 99 HP - -
    Maximum Gross Power - ISO 14396 (metric) 112 HP - -
    Rated Net Power - ISO 9249 98 HP - -
    Maximum Gross Torque - SAE J1995 335 ft·lbf - -
    Maximum Gross Torque - ISO 14396 332 ft·lbf - -
    Maximum Net Torque - SAE J1349 329 ft·lbf - -
    Maximum Net Torque - ISO 9249 327 ft·lbf - -
    Displacement 220 in³ 1105 in³ 927 in²
    Bore 3.85 in 5.7 in 5.4 in
    Stroke 4.72 in 7.2 in 6.75 in
    Engine Model Cat C3.6 Cat® C18 ™ C15 Cat®
    Emissions Engine meets Tier 4 Final/Stage V emission standards. U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA
    Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. - -
    Maximum Gross Power - ISO 14396 110 HP - -
    Net Power - SAE J1349 - 538 HP 373 HP
    Engine Power - ISO 14396:2002 - 580 HP -
    Gross Power - SAE J1995:2014 - 588 HP -
    Rated Speed - 1,700 rpm 2000
    Peak Power Speed - 1,500 rpm 1600
    Peak Torque - 1,200 rpm - SAE J1995 - 2230 ft·lbf 1778 lb/ft
    Torque Rise - 58% 16%
    Peak Power Speed - Gross - SAE J1995 - - 456 HP
    Engine Power - ISO 14396 - - 449 HP
    Rated Speed - 2,000 rpm - EEC 80/1269 - - 373 HP
    Rated Speed - 2,000 rpm - EEC 80/1269 (DIN) - - 378 HP
    Rated Speed - 2,000 rpm - ISO 9249 - - 373 HP
    Rated Speed - 2,000 rpm - ISO 9249 (DIN) - - 378 HP

    Weights
    Operating Weight 19103 lb - -

    Buckets
    Bucket Capacities 1.3-3.5 m3 (1.7-4.6 yd3) 4.7-13 m3 (6.2-17 yd3) -
    Bucket Capacities - General Purpose 1.3-1.9 m³ (1.7-2.5 yd³) - -
    Bucket Capacities - Light Material 2.5-3.5 m³ (3.3-4.6 yd³) - -

    Sustainability
    Recyclability 95% 96% -

    Cab
    ROPS ISO 3471:2008 - -
    FOPS ISO 3449:2005 - -
    Note (4) *The measurements were conducted with the cab doors and windows closed. - -
    Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A). - -
    Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A). - -
    Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. - -

    Service Refill Capacities
    Cooling System 5.7 gal (US) - -
    Fuel Tank 43.6 gal (US) 147 gal (US) 141 gal (US)
    Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. All nonroad Tier 4 Final/Stage V diesel engines are required to use: – The machine has the flexibility to run on either ultra-low-sulfur diesel fuel (ULSD with 15 ppm of sulfur or less). – Cat engines are compatible with the following renewable, alternati -
    Axles - Rear Center Differential 2 gal (US) - -
    Hydraulic System - Including Tank 25.9 gal (US) - -
    Diesel Exhaust Fluid (DEF) Tank 4.8 gal (US) - -
    Engine Crankcase 2.6 gal (US) 16 gal (US) -
    Hydraulic Tank 14.5 gal (US) - -
    Transmission 0.8 gal (US) 16 gal (US) 20 gal (US)
    Axles - Front Center Differential 2 gal (US) - -
    Cooling System - Jacket Water - 30 gal (US) -
    Cooling Systems - Power Train - 8 gal (US) -
    Diesel Exhaust Fluid Tank - 8.7 gal (US) 6 gal (US)
    Differential - Final Drives - Front - 49 gal (US) -
    Differential - Final Drives - Rear - 49 gal (US) -
    Hydraulic System - Implement/Steering - 126 gal (US) -
    Fuel Tank - Short Lift - - 127 gal (US)
    Cooling Systems - - 26 gal (US)
    Crankcase - - 9 gal (US)
    Axle Oil - Differentials and Final Drives - Front - - 49 gal (US)
    Axle Oil - Differentials and Final Drives - Rear - - 45 gal (US)
    Hydraulic System Factory Fill - - 87 gal (US)
    Hydraulic System - Tank Only - - 34 gal (US)

    Steering
    Maximum Flow - Steering Pump 22 gal/min - -
    Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75 turns - -
    Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 2.8 s - -
    Maximum Working Pressure - Steering Pump 3263 psi - -
    Steering Articulation Angle - Each Direction 40 ° - -

    Loader Hydraulic System
    Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 3046 psi - -
    Maximum Flow - Implement Pump 39 gal/min - -
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard 24 gal/min - -
    Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 3046 psi - -
    Hydraulic Cycle Time - Total Cycle Time 12.5 s - -
    Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2 s - -
    Maximum Flow - Implement Pump - 4th Function, Maximum Flow 24 gal/min - -
    Hydraulic Cycle Time - Dump, at Maximum Reach 1.4 s - -
    Relief Pressure - Tilt Cylinder 4931 psi - -
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High 32 gal/min - -
    Maximum Working Pressure - Implement Pump 4061 psi - -
    Hydraulic Cycle Time - Rackback 2.2 s - -
    Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7 s - -

    Transmission
    Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. - -
    Forward and Reverse - Speed Range 3 25 mile/h - -
    Forward and Reverse - Speed Range 1* 6.3 mile/h - -
    Forward and Reverse - Speed Range 2* 12.5 mile/h - -
    Transmission Type - Cat switched reluctance electric drive Cat planetary power shift
    Forward 1 (virtual) - 4.3 mile/h -
    Forward 2 (virtual) - 7 mile/h -
    Forward 3 (virtual) - 13.8 mile/h -
    Forward 4 (virtual) - 20 mile/h -
    Reverse 1 (virtual) - 4.3 mile/h -
    Reverse 2 (virtual) - 7 mile/h -
    Reverse 3 (virtual) - 17.5 mile/h -
    Forward - 1 - - 5 mile/h
    Forward - 2 - - 8 mile/h
    Direct Drive - Forward 2 - - 8 mile/h
    Direct Drive - Forward 3 - - 14 mile/h
    Direct Drive - Forward 4 - - 24 mile/h
    Reverse - 1 - - 5 mile/h
    Reverse - 2 - - 8 mile/h
    Direct Drive - Reverse 2 - - 9 mile/h
    Direct Drive - Reverse 3 - - 16 mile/h
    Direct Drive - Reverse 4 - - 25.4 mile/h

    Tires
    Other Choices Include 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid - -
    Note (1) Other tire choices are available. Contact your Cat dealer for details. - -
    Standard Size 17.5 R25 L2 XTLA - -
    Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. - -
    Note (2) In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. - -

    Axles
    Rear Oscillating ±11 degrees; Locking differential (Standard) Trunnion Trunnion
    Front Fixed; Locking differential (standard) Fixed Fixed
    Oscillation Angle - 13° ±12.5°
    Oscillation Angle - Chain Arrangement - - ±8.5°

    Operating Specifications
    Operating Weight - 116362 lb -
    Operating Weight - Standard - 116362 lb 97785 lb
    Operating Weight - High Lift - 119618 lb 104005 lb
    Rated Payload - Standard (Quarry Face) - 12.5 ton (US) 11 ton (US)
    Rated Payload - Loose Material (Standard) - 16 ton (US) 14 ton (US)
    Bucket Capacity Range - 4.7-13 m3 (6.2-17 yd3) 5-10,3 m³ (6,5-13,5 yd.³)
    Rated Payload - High Lift (Quarry Face) - - 11 ton (US)
    Rated Payload - Loose Material (High Lift) - - 12.1 ton (US)
    Cat Truck Match - Standard - - 770/735/740/745
    Cat Truck Match - High Lift - - 772/773

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - EH-Positive Flow Control, Flow Sharing Load Sense
    Lift/Tilt System - Pump - Variable displacement piston 2 × 110 cc variable displacement
    Maximum Flow at 1,400-1,600 rpm - 153 gal/min -
    Relief Valve Setting - Lift/Tilt - 4757 psi 4050 psi
    Lift Cylinder - Bore - 8.7 in 7.5 in
    Lift Cylinder - Stroke - 41.3 in 45 in
    Tilt Cylinder - Bore - 8.7 in 6.7 in
    Tilt Cylinder - Stroke - 27 in 28.4 in
    Maximum Flow at 2,165 rpm - - 123 gal/min

    Hydraulic Cycle Times
    Rack Back - 4.5 s 4.5 s
    Raise - 8 s 9 s
    Dump - 2.2 s 3.5 s
    Lower Float Down - 3.5 s 4.3 s
    Total Hydraulic Cycle Time - 18.2 s 21.3 s
    Lower - - 5.2 s

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing Load Sense
    Steering System - Pump - Piston, variable displacement Piston, variable displacement
    Maximum Flow at 1,400-1,600 rpm - 71.3 gal/min -
    Steering Cut Off Pressure - 4351 psi 4000 psi
    Total Steering Angle - 86° 70°
    Steering Cycle Times - High Idle - 3.4 s -
    Steering Cycle Times - Low Idle - 5.6 s -
    Maximum Flow at 1,400 rpm - - 52 gal/min

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Brakes
    Brakes - ISO 3450:2011 ISO 3450:2011

    Operator's Cab
    ROPS/FOPS - ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)

    Sound Performance - Tier 4 Final / Stage V - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - 72 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - 109 dB(A) -

    Sound Performance - Tier 3 / Stage III - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - 72 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - 110 dB(A) -

    Dimensions (Approximate) - Standard Lift
    Ground to Top of ROPS - 13.8 ft -
    Ground to Top of Exhaust Stacks - 14.8 ft -
    Ground to Top of Hood - 10.9 ft -
    Ground to Bumper Clearance - 3.1 ft -
    Rear Axle - Centerline to Bumper - 10.5 ft -
    Front Axle Centerline to Bucket Tip - 14 ft -
    Wheel Base - 14.9 ft -
    Maximum Overall Length - 39.3 ft -
    Ground to Lower Hitch Clearance - 1.9 ft -
    Ground to Center of Axles - 3.2 ft -
    Clearance at Maximum Lift - 11.9 ft -
    B-Pin Height - Maximum Lift - 18 ft -
    Maximum Overall Height - Bucket Raised - 24.5 ft -
    Reach - Maximum Lift - 6.5 ft -
    Note - Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. -

    Dimensions (Approximate) - High Lift
    Ground to Top of ROPS - 13.8 ft -
    Ground to Top of Exhaust Stacks - 14.8 ft -
    Ground to Top of Hood - 10.9 ft -
    Ground to Bumper Clearance - 3.1 ft -
    Rear Axle - Centerline to Bumper - 10.5 ft -
    Front Axle Centerline to Bucket Tip - 15.3 ft -
    Wheel Base - 14.9 ft -
    Maximum Overall Length - 40.7 ft -
    Ground to Lower Hitch Clearance - 1.9 ft -
    Ground to Center of Axles - 3.2 ft -
    Clearance at Maximum Lift - 13.3 ft -
    B-Pin Height - Maximum Lift - 19.3 ft -
    Maximum Overall Height - Bucket Raised - 25.8 ft -
    Reach - Maximum Lift - 6.8 ft -
    Note - Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. -

    Dimensions - Millyard Linkage
    Ground to Top of ROPS - 13.8 ft -
    Ground to Top of Exhaust Stacks - 13.8 ft -
    Ground to Top of Hood - 10.9 ft -
    Ground to Bumper Clearance - 3.1 ft -
    Rear Axle - Centerline to Bumper - 10.5 ft -
    Front Axle Centerline to Fork Tip - 16.5 ft -
    Wheel Base - 14.9 ft -
    Maximum Overall Length - 41.9 ft -
    Ground to Lower Hitch Clearance - 1.9 ft -
    Ground to Center of Front Axle - 3.2 ft -
    Fork Height with Level Arms - 8.1 ft -
    Fork Top Clamp Opening - 13.1 ft -
    Fork Height at Maximum Lift - 17.2 ft -
    Hinge Pin Height at Maximum Lift - 16.1 ft -
    Dump Angle at Maximum Lift - -39.4 ° -

    Sound Performance - Standard
    Operator Sound Level (ISO 6396) - - 72 dB(A)
    Machine Sound Level (ISO 6395) - - 112 dB(A)
    Note - -
    • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
    • Hearing protection may be neede

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396) - - 72 dB(A)
    Machine Sound Level (ISO 6395) - - 110 dB(A)
    Note - -
    • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
    • Hearing protection may be neede

    Dimensions (Approximate) - Standard Lift Linkage
    Ground to Top of ROPS - - 13.5 ft
    Ground to Top of Exhaust Stacks - - 13.3 ft
    Ground to Top of Hood - - 10.7 ft
    Ground to Center of Front Axle - - 3.2 ft
    Ground to Fuel Tank Clearance - - 2.3 ft
    Ground to Lower Hitch Clearance - - 1.5 ft
    Reach - Maximum Lift - - 7.1 ft
    Clearance at Maximum Lift - - 10.1 ft
    B-Pin Height - Maximum Lift - - 16.1 ft
    Maximum Overall Height - Bucket Raised - - 22.4 ft
    Rear Axle - Centerline to Bumper - - 10.3 ft
    Wheel Base - - 12.5 ft
    Maximum Overall Length - - 36.6 ft
    Front Axle Centerline to Bucket Tip - - 13.8 ft
    Note - -
    • All dimensions are approximate.
    • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.

    Dimensions (Approximate) - High Lift Linkage
    Ground to Top of ROPS - - 13.5 ft
    Ground to Top of Exhaust Stacks - - 13.3 ft
    Ground to Top of Hood - - 10.7 ft
    Ground to Center of Front Axle - - 3.2 ft
    Ground to Fuel Tank Clearance - - 2.3 ft
    Ground to Lower Hitch Clearance - - 1.5 ft
    Reach - Maximum Lift - - 7.4 ft
    Clearance at Maximum Lift - - 11.6 ft
    B-Pin Height - Maximum Lift - - 17.6 ft
    Maximum Overall Height - Bucket Raised - - 23.9 ft
    Rear Axle - Centerline to Bumper - - 10.3 ft
    Wheel Base - - 12.5 ft
    Maximum Overall Length - - 38 ft
    Front Axle Centerline to Bucket Tip - - 15.3 ft
    Note - -
    • All dimensions are approximate.
    • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.

    Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
    Ground to Top of ROPS - - 13.5 ft
    Ground to Top of Exhaust Stacks - - 13.3 ft
    Ground to Top of Hood - - 10.7 ft
    Ground to Center of Rear Axle - - 3.2 ft
    Ground to Fuel Tank Clearance - - 2.3 ft
    Ground to Lower Hitch Clearance - - 1.5 ft
    Reach at Maximum Lift - - 8 ft
    Clearance at Maximum Lift - - 10.7 ft
    B-Pin Height at Maximum Lift - - 15 ft
    Maximum Overall Height, Bucket Raised - - 20.9 ft
    Rear Axle Center Line to Bumper - - 10.3 ft
    Wheel Base - - 12.5 ft
    Maximum Overall Length - - 35 ft
    Front Axle Centerline to Bucket Tip - - 12.2 ft

    Dimensions (Approximate) - Quick Coupler and Fork
    Ground to Top of ROPS - - 13.5 ft
    Ground to Top of Exhaust Stacks - - 13.3 ft
    Ground to Top of Hood - - 10.7 ft
    Ground to Center of Rear Axle - - 3.2 ft
    Ground to Fuel Tank Clearance - - 2.3 ft
    Ground to Lower Hitch Clearance - - 1.5 ft
    B-Pin Height at Maximum Lift - - 15 ft
    Rear Axle Center Line to Bumper - - 10.3 ft
    Wheel Base - - 12.5 ft
    Maximum Overall Length - - 35.4 ft
    Front Axle Centerline to Bucket Tip - - 12.6 ft
    Add a Similar Product: