CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    914 Compact Wheel Loader
    View Product
    988 GC Wheel Loader
    View Product Remove
    988 XE Wheel Loader
    View Product Remove

    Engine
    Maximum Gross Power 110 HP - -
    Rated Net Power - Rated Engine Speed 2200 r/min - -
    Maximum Gross Power - Rated Engine Speed 1800 r/min - -
    Rated Net Power - SAE J1349 99 HP - -
    Maximum Gross Power - ISO 14396 (metric) 112 HP - -
    Rated Net Power - ISO 9249 98 HP - -
    Maximum Gross Torque - SAE J1995 335 ft·lbf - -
    Maximum Gross Torque - ISO 14396 332 ft·lbf - -
    Maximum Net Torque - SAE J1349 329 ft·lbf - -
    Maximum Net Torque - ISO 9249 327 ft·lbf - -
    Displacement 220 in³ 927 in³ 1105 in³
    Bore 3.85 in 5.4 in 5.7 in
    Stroke 4.72 in 6.75 in 7.2 in
    Engine Model Cat C3.6 Cat® C15 Cat® C18 ™
    Emissions Engine meets Tier 4 Final/Stage V emission standards. U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014
    Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. - -
    Maximum Gross Power - ISO 14396 110 HP - -
    Rated Speed - 2000 1,700 rpm
    Peak Power Speed - 1600 1,500 rpm
    Engine Power - ISO 14396 - 449 HP -
    Gross Power - SAE J1995 - 456 HP -
    Net Power - SAE J1349 - 373 HP 538 HP
    Peak Torque - 1,200 rpm - SAE J1995 - 1778 ft·lbf 2230 ft·lbf
    Torque Rise - 16% 58%
    Engine Power - ISO 14396:2002 - - 580 HP
    Gross Power - SAE J1995:2014 - - 588 HP

    Weights
    Operating Weight 19103 lb - -

    Buckets
    Bucket Capacities 1.3-3.5 m3 (1.7-4.6 yd3) 6.4-7.6 m3 (8.3-10 yd3) 4.7-13 m3 (6.2-17 yd3)
    Bucket Capacities - General Purpose 1.3-1.9 m³ (1.7-2.5 yd³) - -
    Bucket Capacities - Light Material 2.5-3.5 m³ (3.3-4.6 yd³) - -

    Sustainability
    Recyclability 95% 96% 96%

    Cab
    ROPS ISO 3471:2008 - -
    FOPS ISO 3449:2005 - -
    Note (4) *The measurements were conducted with the cab doors and windows closed. - -
    Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A). - -
    Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A). - -
    Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. - -

    Service Refill Capacities
    Cooling System 5.7 gal (US) 27 gal (US) -
    Fuel Tank 43.6 gal (US) 141 gal (US) 147 gal (US)
    Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a All nonroad Tier 4 Final/Stage V diesel engines are required to use: – The machine has the flexibility to run on either ultra-low-sulfur diesel fuel (ULSD with 15 ppm of sulfur or less). – Cat engines are compatible with the following renewable, alternati
    Axles - Rear Center Differential 2 gal (US) - -
    Hydraulic System - Including Tank 25.9 gal (US) - -
    Diesel Exhaust Fluid (DEF) Tank 4.8 gal (US) - -
    Engine Crankcase 2.6 gal (US) 9 gal (US) 16 gal (US)
    Hydraulic Tank 14.5 gal (US) - -
    Transmission 0.8 gal (US) 20 gal (US) 16 gal (US)
    Axles - Front Center Differential 2 gal (US) - -
    Diesel Exhaust Fluid Tank - 5.5 gal (US) 8.7 gal (US)
    Differential - Final Drives - Front - 49 gal (US) 49 gal (US)
    Differential - Final Drives - Rear - 45 gal (US) 49 gal (US)
    Cooling System - Jacket Water - - 30 gal (US)
    Cooling Systems - Power Train - - 8 gal (US)
    Hydraulic System - Implement/Steering - - 126 gal (US)

    Steering
    Maximum Flow - Steering Pump 22 gal/min - -
    Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75 turns - -
    Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 2.8 s - -
    Maximum Working Pressure - Steering Pump 3263 psi - -
    Steering Articulation Angle - Each Direction 40 ° - -

    Loader Hydraulic System
    Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 3046 psi - -
    Maximum Flow - Implement Pump 39 gal/min - -
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard 24 gal/min - -
    Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 3046 psi - -
    Hydraulic Cycle Time - Total Cycle Time 12.5 s - -
    Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2 s - -
    Maximum Flow - Implement Pump - 4th Function, Maximum Flow 24 gal/min - -
    Hydraulic Cycle Time - Dump, at Maximum Reach 1.4 s - -
    Relief Pressure - Tilt Cylinder 4931 psi - -
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High 32 gal/min - -
    Maximum Working Pressure - Implement Pump 4061 psi - -
    Hydraulic Cycle Time - Rackback 2.2 s - -
    Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7 s - -

    Transmission
    Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. - -
    Forward and Reverse - Speed Range 3 25 mile/h - -
    Forward and Reverse - Speed Range 1* 6.3 mile/h - -
    Forward and Reverse - Speed Range 2* 12.5 mile/h - -
    Transmission Type - Cat planetary power shift Cat switched reluctance electric drive
    Forward - 1 - 5 mile/h -
    Forward - 2 - 8 mile/h -
    Reverse - 1 - 5 mile/h -
    Reverse - 2 - 8 mile/h -
    Direct Drive - Forward 1 - Lock-up disabled -
    Direct Drive - Forward 2 - 8 mile/h -
    Direct Drive - Forward 3 - 14 mile/h -
    Direct Drive - Forward 4 - 24 mile/h -
    Direct Drive - Reverse 1 - Lock-up disabled -
    Direct Drive - Reverse 2 - 9 mile/h -
    Direct Drive - Reverse 3 - 16 mile/h -
    Direct Drive - Reverse 4 - 25.4 mile/h -
    Forward 1 (virtual) - - 4.3 mile/h
    Forward 2 (virtual) - - 7 mile/h
    Forward 3 (virtual) - - 13.8 mile/h
    Forward 4 (virtual) - - 20 mile/h
    Reverse 1 (virtual) - - 4.3 mile/h
    Reverse 2 (virtual) - - 7 mile/h
    Reverse 3 (virtual) - - 17.5 mile/h

    Tires
    Other Choices Include 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid - -
    Note (1) Other tire choices are available. Contact your Cat dealer for details. - -
    Standard Size 17.5 R25 L2 XTLA - -
    Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. - -
    Note (2) In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. - -

    Axles
    Rear Oscillating ±11 degrees; Locking differential (Standard) Trunnion Trunnion
    Front Fixed; Locking differential (standard) Fixed Fixed
    Oscillation Angle - +/-12.5° 13°

    Operating Specifications
    Operating Weight - 116858 lb 116362 lb
    Rated Payload - Quarry Face - 12.5 ton (US) -
    Bucket Capacity Range - 6.4-7.6 m3 (8.3-10 yd3) 4.7-13 m3 (6.2-17 yd3)
    Cat Truck Match - High Lift - 772/773/775 -
    Operating Weight - Standard - - 116362 lb
    Operating Weight - High Lift - - 119618 lb
    Rated Payload - Standard (Quarry Face) - - 12.5 ton (US)
    Rated Payload - Loose Material (Standard) - - 16 ton (US)

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - EH - Load Sense EH-Positive Flow Control, Flow Sharing
    Lift/Tilt System - 2X x 145 cc Variable displacement piston -
    Maximum Flow at 2,165 rpm - 159 gal/min -
    Relief Valve Setting - Lift/Tilt - 4598 psi 4757 psi
    Cylinders, Double Acting - Lift, Bore and Stroke - 190 mm x 1216 mm (7.5 in x 48 in) -
    Cylinders, Double Acting - Tilt, Bore and Stroke - 170 mm x 722 mm (6.7 in x 28.4 in) -
    Pilot System - Variable displacement piston -
    Tilt Cylinder - Stroke - 27 in 27 in
    Lift/Tilt System - Pump - - Variable displacement piston
    Maximum Flow at 1,400-1,600 rpm - - 153 gal/min
    Lift Cylinder - Bore - - 8.7 in
    Lift Cylinder - Stroke - - 41.3 in
    Tilt Cylinder - Bore - - 8.7 in

    Hydraulic Cycle Times
    Rack Back - 3.8 s 4.5 s
    Raise - 7.5 s 8 s
    Dump - 3 s 2.2 s
    Lower Float Down - 4.6 s 3.5 s
    Total Hydraulic Cycle Time - Empty Bucket - 18.9 s -
    Total Hydraulic Cycle Time - - 18.2 s

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing Pilot, load sensing
    Steering System - Pump - Piston, variable displacement Piston, variable displacement
    Maximum Flow - 52 gal (US) -
    Relief Valve Setting - Steering - 4000 psi -
    Total Steering Angle - 70° 86°
    Steering Cycle Times - High Idle - 3 s 3.4 s
    Steering Cycle Times - Low Idle - 5.2 s 5.6 s
    Maximum Flow at 1,400-1,600 rpm - - 71.3 gal/min
    Steering Cut Off Pressure - - 4351 psi

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Brakes
    Brakes - ISO 3450:2011 ISO 3450:2011

    Operator's Cab
    ROPS/FOPS - ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) - 72 dB(A) -
    Machine Sound Level (ISO 6395) - 110 dB(A) -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. -

    Dimensions (Approximate) - High Lift
    Ground to Top of ROPS - 13.5 ft 13.8 ft
    Ground to Top of Exhaust Stacks - 13.3 ft 14.8 ft
    Ground to Top of Hood - 10.7 ft 10.9 ft
    Rear Axle - Centerline to Bumper - 10.3 ft 10.5 ft
    Front Axle Centerline to Bucket Tip - 15.7 ft 15.3 ft
    Wheel Base - 12.5 ft 14.9 ft
    Maximum Overall Length - 39.5 ft 40.7 ft
    Ground to Lower Hitch Clearance - 1.5 ft 1.9 ft
    Clearance at Maximum Lift - 12 ft 13.3 ft
    B-Pin Height - Maximum Lift - 18.7 ft 19.3 ft
    Maximum Overall Height - Bucket Raised - 25 ft 25.8 ft
    Reach - Maximum Lift - 7.7 ft 6.8 ft
    Note - Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires. Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
    Ground to Bumper Clearance - - 3.1 ft
    Ground to Center of Axles - - 3.2 ft

    Sound Performance - Tier 4 Final / Stage V - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - - 72 dB(A)
    Machine Sound Power Level (ISO 6395:2008) - - 109 dB(A)

    Sound Performance - Tier 3 / Stage III - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - - 72 dB(A)
    Machine Sound Power Level (ISO 6395:2008) - - 110 dB(A)

    Dimensions (Approximate) - Standard Lift
    Ground to Top of ROPS - - 13.8 ft
    Ground to Top of Exhaust Stacks - - 14.8 ft
    Ground to Top of Hood - - 10.9 ft
    Ground to Bumper Clearance - - 3.1 ft
    Rear Axle - Centerline to Bumper - - 10.5 ft
    Front Axle Centerline to Bucket Tip - - 14 ft
    Wheel Base - - 14.9 ft
    Maximum Overall Length - - 39.3 ft
    Ground to Lower Hitch Clearance - - 1.9 ft
    Ground to Center of Axles - - 3.2 ft
    Clearance at Maximum Lift - - 11.9 ft
    B-Pin Height - Maximum Lift - - 18 ft
    Maximum Overall Height - Bucket Raised - - 24.5 ft
    Reach - Maximum Lift - - 6.5 ft
    Note - - Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.

    Dimensions - Millyard Linkage
    Ground to Top of ROPS - - 13.8 ft
    Ground to Top of Exhaust Stacks - - 13.8 ft
    Ground to Top of Hood - - 10.9 ft
    Ground to Bumper Clearance - - 3.1 ft
    Rear Axle - Centerline to Bumper - - 10.5 ft
    Front Axle Centerline to Fork Tip - - 16.5 ft
    Wheel Base - - 14.9 ft
    Maximum Overall Length - - 41.9 ft
    Ground to Lower Hitch Clearance - - 1.9 ft
    Ground to Center of Front Axle - - 3.2 ft
    Fork Height with Level Arms - - 8.1 ft
    Fork Top Clamp Opening - - 13.1 ft
    Fork Height at Maximum Lift - - 17.2 ft
    Hinge Pin Height at Maximum Lift - - 16.1 ft
    Dump Angle at Maximum Lift - - -39.4 °
    Add a Similar Product: