CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    914 Compact Wheel Loader
    View Product
    995 Wheel Loader
    View Product Remove
    990 Wheel Loader
    View Product Remove
    972
    View Product Remove

    Engine
    Maximum Gross Power 110 HP - - -
    Rated Net Power - Rated Engine Speed 2200 r/min - - -
    Maximum Gross Power - Rated Engine Speed 1800 r/min - - -
    Rated Net Power - SAE J1349 99 HP - - -
    Maximum Gross Power - ISO 14396 (metric) 112 HP - - -
    Rated Net Power - ISO 9249 98 HP - - -
    Maximum Gross Torque - SAE J1995 335 ft·lbf - - -
    Maximum Gross Torque - ISO 14396 332 ft·lbf - - -
    Maximum Net Torque - SAE J1349 329 ft·lbf - - -
    Maximum Net Torque - ISO 9249 327 ft·lbf - - -
    Displacement 220 in³ 4766 in³ 1649.5 in³ 9.3 L
    Bore 3.85 in 6.7 in 5.4 in -
    Stroke 4.72 in 8.5 in 6 in -
    Engine Model Cat C3.6 Cat® 3516E C27 Cat® Cat C9.3B
    Emissions Engine meets Tier 4 Final/Stage V emission standards. U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent U.S. EPA TIer 4 Final and EU Stage V emission standards or U.S. EPA Tier 2 and EU Stage II equivalent -
    Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. - - -
    Maximum Gross Power - ISO 14396 110 HP - - -
    Engine Power - ISO 14396 - 1847 HP 752 HP -
    Gross Power - SAE J1995 - 1870 HP 766 HP -
    Net Power - SAE J1349 - Standard Ambient - 1739 HP 699 HP -
    Net Power - SAE J1349 - High Ambient - 1696 HP 648 HP -
    Peak Torque - 1,200 rpm - SAE J1995 - 8549 lb/ft - -
    Torque Rise - 39% 18 % -
    Note (1) - The power ratings apply when tested under the reference conditions for the specified standard. - Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards.
    Note (2) - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
    Note (3) - The gross power advertised is with the fan at maximum speed. - Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h
    Rated Speed - - 1,800/min -
    Peak Torque - 1,200 rpm - - 2624 lb/ft -
    Engine Power @ 1,600 rpm - ISO 14396:2002 - - - 339 HP
    Gross Power @ 1,600 rpm - SAE J1995:2014 - - - 342 HP
    Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011 - - - 321 HP
    Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011 - - - 1316 ft-lb
    Engine Torque @ 1,200 rpm – ISO 14396:2002 - - - 1375 lb/ft
    Gross Torque @ 1,200 rpm – SAE J1995:2014 - - - 1388 lb/ft

    Weights
    Operating Weight 19103 lb - - 54858 lb
    Note - - - Weight based on a machine configuration with Bridgestone 26.5R25 VJTL3 radial tires, full fluids, operator, standard counterweight, ride control,cold start, roading fenders, Product Link, front manual differential/openrear axles, power train guard, second

    Buckets
    Bucket Capacities 1.3-3.5 m3 (1.7-4.6 yd3) - 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³) -
    Bucket Capacities - General Purpose 1.3-1.9 m³ (1.7-2.5 yd³) - - -
    Bucket Capacities - Light Material 2.5-3.5 m³ (3.3-4.6 yd³) - - -

    Sustainability
    Recyclability 95% - - -

    Cab
    ROPS ISO 3471:2008 - - -
    FOPS ISO 3449:2005 - - -
    Note (4) *The measurements were conducted with the cab doors and windows closed. - - -
    Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A). - - -
    Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A). - - -
    Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. - - -

    Service Refill Capacities
    Cooling System 5.7 gal (US) - 54.9 gal (US) 17.4 gal (US)
    Fuel Tank 43.6 gal (US) - 294.3 gal (US) 80.1 gal (US)
    Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. - All nonroad U.S. EPA Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or l -
    Axles - Rear Center Differential 2 gal (US) - - -
    Hydraulic System - Including Tank 25.9 gal (US) - - -
    Diesel Exhaust Fluid (DEF) Tank 4.8 gal (US) - - -
    Engine Crankcase 2.6 gal (US) - 20 gal (US) -
    Hydraulic Tank 14.5 gal (US) - - 30.1 gal (US)
    Transmission 0.8 gal (US) - 29.1 gal (US) 15.5 gal (US)
    Axles - Front Center Differential 2 gal (US) - - -
    Differential - Final Drives - Front - - 71.6 gal (US) 15.1 gal (US)
    Differential - Final Drives - Rear - - 68.9 gal (US) 15.1 gal (US)
    Hydraulic System Factory Fill - - 210 gal (US) -
    Hydraulic Tank - Implement and Hydraulic Fan - - 68.9 gal (US) -
    Hydraulic Tank - Steering and Braking - - 34.9 gal (US) -
    Crankcase - - - 6.1 gal (US)
    DEF Tank - - - 6.9 gal (US)

    Steering
    Maximum Flow - Steering Pump 22 gal/min - - -
    Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75 turns - - -
    Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 2.8 s - - -
    Maximum Working Pressure - Steering Pump 3263 psi - - -
    Steering Articulation Angle - Each Direction 40 ° - - -

    Loader Hydraulic System
    Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 3046 psi - - -
    Maximum Flow - Implement Pump 39 gal/min - - -
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard 24 gal/min - - -
    Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 3046 psi - - -
    Hydraulic Cycle Time - Total Cycle Time 12.5 s - - -
    Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2 s - - -
    Maximum Flow - Implement Pump - 4th Function, Maximum Flow 24 gal/min - - -
    Hydraulic Cycle Time - Dump, at Maximum Reach 1.4 s - - -
    Relief Pressure - Tilt Cylinder 4931 psi - - -
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High 32 gal/min - - -
    Maximum Working Pressure - Implement Pump 4061 psi - - -
    Hydraulic Cycle Time - Rackback 2.2 s - - -
    Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7 s - - -

    Transmission
    Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. Travel speeds based on 58/85-57 tires. Travel speeds based on Michelin 45/65R39 LD D2**L5 tires. Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius.
    Forward and Reverse - Speed Range 3 25 mile/h - - -
    Forward and Reverse - Speed Range 1* 6.3 mile/h - - -
    Forward and Reverse - Speed Range 2* 12.5 mile/h - - -
    Transmission Type - Cat Planetary Power Shift Cat planetary power shift -
    Forward - 1 - 4.6 mile/h 4.5 mile/h 4.1 mile/h
    Forward - 2 - 8 mile/h 8.3 mile/h 8.4 mile/h
    Forward - 3 - 13.6 mile/h 14.2 mile/h 15 mile/h
    Reverse - 1 - 5 mile/h 4.9 mile/h 4.5 mile/h
    Reverse - 2 - 8.8 mile/h 9.1 mile/h 9.2 mile/h
    Reverse - 3 - 14.9 mile/h 15.5 mile/h 16.5 mile/h
    Direct Drive - Forward 1 - Lock-up disables Lock-up disabled -
    Direct Drive - Forward 2 - 8.7 mile/h 8.5 mile/h -
    Direct Drive - Forward 3 - 15.2 mile/h 15.2 mile/h -
    Direct Drive - Reverse 1 - Lock-up disables 5.4 mile/h -
    Direct Drive - Reverse 2 - 9.6 mile/h 9.6 mile/h -
    Direct Drive - Reverse 3 - 16.8 mile/h 16.4 mile/h -
    Forward - 4 - - - 24.5 mile/h
    Reverse - 4 - - - 24.5 mile/h

    Tires
    Other Choices Include 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid - - -
    Note (1) Other tire choices are available. Contact your Cat dealer for details. - - -
    Standard Size 17.5 R25 L2 XTLA - - -
    Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. - - -
    Note (2) In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. - - -

    Axles
    Rear Oscillating ±11 degrees; Locking differential (Standard) Trunnion Trunnion -
    Front Fixed; Locking differential (standard) Fixed Fixed -
    Oscillation Angle - 9° 8.5° -

    Operating Specifications
    Operating Weight - Standard - 543772 lb - -
    Bucket Capacity Range - 17.2-43.6 m3 (22.3-57 yd3) 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³) -
    Operating Weight - High Lift - 547675 lb - -
    Rated Payload - Standard Lift (Low to Moderate Digging Resistance) - 60 ton (US) - -
    Rated Payload - Standard Lift (Moderate to High Digging Resistance) - 50 ton (US) - -
    Rated Payload - High Lift (Low to Moderate Digging Resistance) - 55 ton (US) - -
    Rated Payload - High Lift (Moderate to High Digging Resistance) - 50 ton (US) - -
    Note - *Please contact your local dealer to determine if your application is suitable for this increased rated payload. - -
    Cat Truck Match - Standard - 785/789 773-775 -
    Cat Truck Match - High Lift - 789/793/794 775-777 -
    Operating Weight - - 178517 lb -
    Rated Payload - Standard - - 17.5 ton (US) -
    Rated Payload - High Lift - - 17.5 ton (US) -
    Breakout Force - - - 44072 lb
    Note (1) - - - For a machine configuration as defined under Weight.
    Note (2) - - - Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
    Static Tipping Load - Full 40° Turn - No Tire Deflection - - - 17505 kg
    Static Tipping Load - Full 40° Turn - With Tire Deflection - - - 35919 lb

    Complete System Fill
    Fuel Tank - Standard - 856 gal (US) - -
    Fuel Tank - With 24 hr Attachment - 1414 gal (US) - -
    Cooling System - 138 gal (US) - -
    Engine Crankcase - 76 gal (US) - -
    Transmission - 110 gal (US) - -
    Differential - Final Drives - Front - 220 gal (US) - -
    Differential - Final Drives - Rear - 200 gal (US) - -
    Hydraulic Tank - Implement and Hydraulic Fan - 270 gal (US) - -
    Hydraulic Tank - Steering and Braking - 100 gal (US) - -
    Oil Renewal System (ORS)* - 20 gal (US) - -
    Note - *Not available on Tier 4 Final/Stage V machines. Not available in all regions. - -

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard - 109.4 °F - -
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) - 131 °F - -
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) - 127.4 °F - -

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - 74 dB(A) - -
    Machine Sound Level (ISO 6395:2008) - 119 dB(A) 115 dB(A) -
    Note - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c - -
    Operator Sound Level (ISO 6396:2008) - - 65.5 dB(A) -

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - 73 dB(A) - -
    Machine Sound Level (ISO 6395:2008) - 117 dB(A) 113 dB(A) -
    Note - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c - -
    Operator Sound Level (ISO 6396:2008) - - 65.5 dB(A) -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, Load Sensing Pilot, load sensing -
    Steering System - Pump - Piston, Variable Displacement Piston, variable displacement -
    Total Steering Angle - 80 degrees 70° -
    Steering Cycle Times - Low Idle - 7.6 s - -
    Steering Cycle Times - High Idle - 4.3 s - -
    Maximum Flow at 1,400 rpm - - 96.2 gal/min -
    Relief Valve Setting - Steering - - 5004 psi -

    Dimensions - Standard Lift - Approximate
    B-Pin Height - Maximum Lift - 28.8 ft - -
    Clearance at Maximum Lift - 19.8 ft - -
    Dump Angle at Maximum Lift - –50.0 degrees - -
    Front Axle Centerline to Bucket Tip - 21.9 ft - -
    Ground to Bumper Clearance - 4.4 ft - -
    Ground to Center of Axles - 6 ft - -
    Ground to Lower Hitch Clearance - 2.9 ft - -
    Ground to Top of Exhaust Stacks - 23.2 ft - -
    Ground to Top of Hood - 18.6 ft - -
    Ground to Top of ROPS - 23.4 ft - -
    Maximum Overall Height - Bucket Raised - 39.3 ft - -
    Maximum Overall Length - 64.6 ft - -
    Note - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. - -
    Rack Angle at Maximum Lift - 59.5 degrees - -
    Rack Back Angle - Carry - 47.7 degrees - -
    Rack Back Angle - Ground Level - 39.7 degrees - -
    Reach - Maximum Lift - 9.6 ft - -
    Rear Axle - Centerline to Bumper - 20.4 ft - -
    Tread Width - 14.1 ft - -
    Wheel Base - 22.3 ft - -
    Width - Over Tires - With Bulge - 18.8 ft - -

    Dimensions - High Lift - Approximate
    B-Pin Height - Maximum Lift - 31.6 ft - -
    Clearance at Maximum Lift - 22.6 ft - -
    Dump Angle at Maximum Lift - –50.0 degrees - -
    Front Axle Centerline to Bucket Tip - 24.2 ft - -
    Ground to Bumper Clearance - 4.4 ft - -
    Ground to Center of Axles - 6 ft - -
    Ground to Lower Hitch Clearance - 2.9 ft - -
    Ground to Top of Exhaust Stacks - 23.2 ft - -
    Ground to Top of Hood - 18.6 ft - -
    Ground to Top of ROPS - 23.4 ft - -
    Maximum Overall Height - Bucket Raised - 42.1 ft - -
    Maximum Overall Length - 66.9 ft - -
    Note - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. - -
    Rack Angle at Maximum Lift - 59.4 degrees - -
    Rack Back Angle - Carry - 53.5 degrees - -
    Rack Back Angle - Ground Level - 45 degrees - -
    Reach - Maximum Lift - 9.4 ft - -
    Rear Axle - Centerline to Bumper - 20.4 ft - -
    Tread Width - 14.1 ft - -
    Wheel Base - 22.3 ft - -
    Width - Over Tires - With Bulge - 18.8 ft - -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Positive Flow Control Positive flow control -
    Lift/Tilt System - Pump - Variable Displacement Piston - -
    Maximum Flow at 1,700 rpm Engine Speed - 541 gal/min - -
    Relief Valve Setting - Lift/Tilt - 5004 psi 4786 psi -
    Cylinders, Double Acting - Lift, Bore and Stroke - 370 × 1713 mm (14.6 × 67.4 in) 235 mm × 1287 mm (9.3 in × 50.7 in) -
    Cylinders, Double Acting - Tilt, Bore and Stroke - 310 × 1086 mm (12.2 × 42.8 in) 292.1 mm × 820 mm (11.5 in × 32.3 in) -
    Pilot System - Open Loop and Pressure Reducing Open loop and pressure reducing -
    Lift/Tilt System - - Variable displacement piston -
    Maximum Flow at 1,800 rpm (1) - - 240 gal/min -
    Relief Valve Setting - Main - - 507 psi -

    Hydraulic Cycle Times
    Rack Back - 4.9 s 4.3 s -
    Raise - 12.6 s 8.2 s -
    Dump - 3.1 s 2.9 s -
    Lower Float Down - 4.2 s 3.6 s -
    Lower - - 3.7 s -
    Total Hydraulic Cycle Time - Empty Bucket - - 13.8 s -

    Brakes
    Brakes - ISO 3450:2011 ISO 3450: 2011 -

    Air Conditioning System
    Air Conditioning - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.7 kg of refrigerant which has a CO2 equivalent of 3.861 metric tonnes (4.256 tons). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons).

    Bucket Capacities
    Bucket Range - - - 2.8-14.0 m³ 3.75-18.25 yd³

    Sound
    Note (1) - - - ** For machines in European Union countries and in countries that adopt the EU Directives.
    Note (2) - - - ***European Union Directive 2000/14/EC as amended by 2005/88/EC.
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* - - - 108
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) - - - 69 dB(A)
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) - - - 109 dB(A)
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) - - - 76
    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) - - - 70 dB(A)
    With Cooling Fan Speed at Maximum Value - Note - - - Distance of 15 m (49.2 ft), moving forward in second gear ratio.

    Hydraulic System
    Implement System - Maximum Operating Pressure - - - 4496 psi
    Implement System - Maximum Pump Output at 2,250 rpm - - - 99 gal/min
    Hydraulic Cycle Time - Total - - - 10.7 seconds

    Dimensions
    Note - - - All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.

    Dimensions - High Lift
    Centerline of Rear Axle to Edge of Counterweight - - - 8.1 ft
    Centerline of Rear Axle to Hitch - - - 5.1 ft
    Ground Clearance - - - 1.4 ft
    Height - Top of Exhaust Pipe - - - 11.8 ft
    Height - Top of Hood - - - 9.5 ft
    Height - Top of ROPS - - - 11.1 ft
    Hinge Pin Height at Carry - - - 2.6 ft
    Hinge Pin Height at Maximum Lift - - - 15.9 ft
    Lift Arm Clearance at Maximum Lift - - - 13.8 ft
    Overall Length - Without Bucket - - - 26.6 ft
    Tread Width - - - 7.3 ft
    Wheel Base - - - 11.8 ft
    Rack Back at Ground - - - 37 degrees
    Rack Back - Maximum Lift - - - 71 degrees
    Rack Back - Carry Height - - - 49 degrees
    Width over Tires (Loaded) - - - 9.11 ft

    Dimensions - Standard Lift
    Centerline of Rear Axle to Hitch - - - 5.1 ft
    Ground Clearance - - - 420 mm
    Height - Top of Exhaust Pipe - - - 3527 mm
    Height - Top of Hood - - - 2846 mm
    Height - Top of ROPS - - - 3589 mm
    Hinge Pin Height at Carry - - - 2.2 ft
    Hinge Pin Height at Maximum Lift - - - 4464 mm
    Lift Arm Clearance at Maximum Lift - - - 3843 mm
    Overall Length - Without Bucket - - - 7731 mm
    Tread Width - - - 7.3 ft
    Wheel Base - - - 3550 mm
    Rack Back at Ground - - - 39 degrees
    Width over Tires (Loaded) - - - 9.11 ft
    Centerline of Rear Axle to Edge of Counterweight - - - 8 ft
    Rack Back - Maximum Lift - - - 56 degrees
    Rack Back - Carry Height - - - 49 degrees
    Add a Similar Product: