Compare

Compare Equipment Go Back

Engine
	914 Compact Wheel Loader View Product	995 Wheel Loader View Product Remove	992 Wheel Loader View Product Remove	980 XE View Product Remove
Maximum Gross Power	110 HP	-	-	-
Rated Net Power - Rated Engine Speed	2200 r/min	-	-	-
Maximum Gross Power - Rated Engine Speed	1800 r/min	-	-	-
Rated Net Power - SAE J1349	99 HP	-	-	-
Maximum Gross Power - ISO 14396 (metric)	112 HP	-	-	-
Rated Net Power - ISO 9249	98 HP	-	-	-
Maximum Gross Torque - SAE J1995	335 ft·lbf	-	-	-
Maximum Gross Torque - ISO 14396	332 ft·lbf	-	-	-
Maximum Net Torque - SAE J1349	329 ft·lbf	-	-	-
Maximum Net Torque - ISO 9249	327 ft·lbf	-	-	-
Displacement	220 in³	4766 in³	1963.5 in³	-
Bore	3.85 in	6.7 in	5.7 in	-
Stroke	4.72 in	8.5 in	6.4 in	-
Engine Model	Cat C3.6	Cat® 3516E	Cat® C32B	Cat C13
Emissions	Engine meets Tier 4 Final/Stage V emission standards.	U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent	U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent	-
Note	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.	-	-	-
Maximum Gross Power - ISO 14396	110 HP	-	-	-
Engine Power - ISO 14396	-	1847 HP	-	-
Gross Power - SAE J1995	-	1870 HP	-	-
Net Power - SAE J1349 - Standard Ambient	-	1739 HP	-	-
Net Power - SAE J1349 - High Ambient	-	1696 HP	-	-
Peak Torque - 1,200 rpm - SAE J1995	-	8549 lb/ft	-	-
Torque Rise	-	39%	-	-
Note (1)	-	The power ratings apply when tested under the reference conditions for the specified standard.	-	Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 214 emission standards.
Note (2)	-	The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.	-	The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
Note (3)	-	The gross power advertised is with the fan at maximum speed.	-	Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h
Net Power	-	-	814 HP	-
Rated Speed	-	-	1750 rpm	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard	-	-	900 HP	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient	-	-	937 HP	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard	-	-	907 HP	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient	-	-	944 HP	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard	-	-	884 HP	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient	-	-	921 HP	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard	-	-	893 HP	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient	-	-	931 HP	-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard	-	-	814 HP	-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient	-	-	814 HP	-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard	-	-	823 HP	-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient	-	-	823 HP	-
Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm	-	-	3514 ft·lbf	-
Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm	-	-	3555 ft·lbf	-
Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm	-	-	3537 ft·lbf	-
Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm	-	-	3570 ft·lbf	-
Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011	-	-	-	393 HP
Gross Torque @ 1,200 rpm – SAE J1995:2014	-	-	-	1627 lb/ft
Engine Torque @ 1,200 rpm – ISO 14396:2002	-	-	-	1612 lb/ft
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011	-	-	-	1539 lb/ft
Engine Power @ 1,700 rpm – ISO 14396:2002	-	-	-	420 HP
Gross Power @ 1,700 rpm – SAE J1995:2014	-	-	-	425 HP
Weights
Operating Weight	19103 lb	-	-	66877 lb
Note	-	-	-	Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s
Buckets
Bucket Capacities	1.3-3.5 m3 (1.7-4.6 yd3)	-	11.5-24.5 m³ (15-32 yd³)	-
Bucket Capacities - General Purpose	1.3-1.9 m³ (1.7-2.5 yd³)	-	-	-
Bucket Capacities - Light Material	2.5-3.5 m³ (3.3-4.6 yd³)	-	-	-
Sustainability
Recyclability	95%	-	-	98%
Cab
ROPS	ISO 3471:2008	-	-	-
FOPS	ISO 3449:2005	-	-	-
Note (4)	*The measurements were conducted with the cab doors and windows closed.	-	-	-
Note (2)	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).	-	-	-
Note (3)	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).	-	-	-
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.	-	-	-
Service Refill Capacities
Cooling System	5.7 gal (US)	-	-	13.7 gal (US)
Fuel Tank	43.6 gal (US)	-	385.7 gal (US)	112.5 gal (US)
Note	DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.	-	-	-
Axles - Rear Center Differential	2 gal (US)	-	-	-
Hydraulic System - Including Tank	25.9 gal (US)	-	-	-
Diesel Exhaust Fluid (DEF) Tank	4.8 gal (US)	-	-	-
Engine Crankcase	2.6 gal (US)	-	-	-
Hydraulic Tank	14.5 gal (US)	-	-	40.4 gal (US)
Transmission	0.8 gal (US)	-	51.5 gal (US)	20.3 gal (US)
Axles - Front Center Differential	2 gal (US)	-	-	-
Cooling Systems	-	-	59.4 gal (US)	-
Crankcase	-	-	31.7 gal (US)	9.8 gal (US)
Differential - Final Drives - Front	-	-	96.4 gal (US)	24.3 gal (US)
Differential - Final Drives - Rear	-	-	96.4 gal (US)	24.3 gal (US)
Hydraulic System Factory Fill (Implement)	-	-	104.1 gal (US)	-
Hydraulic Tank - Implement	-	-	60.2 gal (US)	-
Hydraulic Factory Fill (Steering)	-	-	32.5 gal (US)	-
Hydraulic Tank (Steering Tank Only)	-	-	26.3 gal (US)	-
DEF Tank	-	-	-	5.5 gal (US)
Steering
Maximum Flow - Steering Pump	22 gal/min	-	-	-
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	3.75 turns	-	-	-
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed	2.8 s	-	-	-
Maximum Working Pressure - Steering Pump	3263 psi	-	-	-
Steering Articulation Angle - Each Direction	40 °	-	-	-
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure	3046 psi	-	-	-
Maximum Flow - Implement Pump	39 gal/min	-	-	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard	24 gal/min	-	-	-
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure	3046 psi	-	-	-
Hydraulic Cycle Time - Total Cycle Time	12.5 s	-	-	-
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	5.2 s	-	-	-
Maximum Flow - Implement Pump - 4th Function, Maximum Flow	24 gal/min	-	-	-
Hydraulic Cycle Time - Dump, at Maximum Reach	1.4 s	-	-	-
Relief Pressure - Tilt Cylinder	4931 psi	-	-	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High	32 gal/min	-	-	-
Maximum Working Pressure - Implement Pump	4061 psi	-	-	-
Hydraulic Cycle Time - Rackback	2.2 s	-	-	-
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	3.7 s	-	-	-
Transmission
Note	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.	Travel speeds based on 58/85-57 tires.	-	Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius.
Forward and Reverse - Speed Range 3	25 mile/h	-	-	-
Forward and Reverse - Speed Range 1*	6.3 mile/h	-	-	-
Forward and Reverse - Speed Range 2*	12.5 mile/h	-	-	-
Transmission Type	-	Cat Planetary Power Shift	Cat Planetary Powershift	-
Forward - 1	-	4.6 mile/h	4.3 mile/h	4.4 mile/h
Forward - 2	-	8 mile/h	7.4 mile/h	8.4 mile/h
Forward - 3	-	13.6 mile/h	12.7 mile/h	14.9 mile/h
Reverse - 1	-	5 mile/h	4.7 mile/h	5 mile/h
Reverse - 2	-	8.8 mile/h	8.1 mile/h	9.6 mile/h
Reverse - 3	-	14.9 mile/h	13.9 mile/h	18.3 mile/h
Direct Drive - Forward 1	-	Lock-up disables	Disabled	-
Direct Drive - Forward 2	-	8.7 mile/h	8 mile/h	-
Direct Drive - Forward 3	-	15.2 mile/h	14 mile/h	-
Direct Drive - Reverse 1	-	Lock-up disables	5 mile/h	-
Direct Drive - Reverse 2	-	9.6 mile/h	8.8 mile/h	-
Direct Drive - Reverse 3	-	16.8 mile/h	15.3 mile/h	-
Forward - 4	-	-	-	24.5 mile/h
Tires
Other Choices Include	17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid	-	-	-
Note (1)	Other tire choices are available. Contact your Cat dealer for details.	-	-	-
Standard Size	17.5 R25 L2 XTLA	-	-	-
Note (3)	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.	-	-	-
Note (2)	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.	-	-	-
Axles
Rear	Oscillating ±11 degrees; Locking differential (Standard)	Trunnion	Trunnion	-
Front	Fixed; Locking differential (standard)	Fixed	Fixed	-
Oscillation Angle	-	9°	±9°	-
Operating Specifications
Operating Weight - Standard	-	543772 lb	-	-
Bucket Capacity Range	-	17.2-43.6 m3 (22.3-57 yd3)	11.5-24.5 m³ (15-32 yd³)	-
Operating Weight - High Lift	-	547675 lb	-	-
Rated Payload - Standard Lift (Low to Moderate Digging Resistance)	-	60 ton (US)	-	-
Rated Payload - Standard Lift (Moderate to High Digging Resistance)	-	50 ton (US)	-	-
Rated Payload - High Lift (Low to Moderate Digging Resistance)	-	55 ton (US)	-	-
Rated Payload - High Lift (Moderate to High Digging Resistance)	-	50 ton (US)	-	-
Note	-	*Please contact your local dealer to determine if your application is suitable for this increased rated payload.	-	-
Cat Truck Match - Standard	-	785/789	775/777	-
Cat Truck Match - High Lift	-	789/793/794	785	-
Operating Weight	-	-	233430 lb	-
Rated Payload - Standard	-	-	25.5 ton (US)	-
Rated Payload - Standard (Material Handler)	-	-	30 ton (US)	-
Rated Payload - High Lift	-	-	22.5 ton (US)	-
Rated Payload - High Lift (Material Handler)	-	-	27 ton (US)	-
Breakout Force	-	-	-	51008 lbf
Note (1)	-	-	-	For a machine configuration as defined under Weight.
Note (2)	-	-	-	Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Static Tipping Load - Full 40° Turn - No Tire Deflection	-	-	-	20965 kg
Static Tipping Load - Full 40° Turn - With Tire Deflection	-	-	-	43432 lb
Complete System Fill
Fuel Tank - Standard	-	856 gal (US)	-	-
Fuel Tank - With 24 hr Attachment	-	1414 gal (US)	-	-
Cooling System	-	138 gal (US)	-	-
Engine Crankcase	-	76 gal (US)	-	-
Transmission	-	110 gal (US)	-	-
Differential - Final Drives - Front	-	220 gal (US)	-	-
Differential - Final Drives - Rear	-	200 gal (US)	-	-
Hydraulic Tank - Implement and Hydraulic Fan	-	270 gal (US)	-	-
Hydraulic Tank - Steering and Braking	-	100 gal (US)	-	-
Oil Renewal System (ORS)*	-	20 gal (US)	-	-
Note	-	*Not available on Tier 4 Final/Stage V machines. Not available in all regions.	-	-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard	-	109.4 °F	109.4 °F	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)	-	131 °F	-	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)	-	127.4 °F	-	-
Ambient Capability, Hydraulically Driven Demand Fan - High	-	-	131 °F	-
Sound Performance - Standard
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	74 dB(A)	-	-
Machine Sound Level (ISO 6395:2008)	-	119 dB(A)	-	-
Note	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	Machine Sound Level (ISO 6396:2008) - 116 dB(A)	-
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	73 dB(A)	-	-
Machine Sound Level (ISO 6395:2008)	-	117 dB(A)	-	-
Note	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	Machine Sound Level (ISO 6396:2008) - 113 dB(A)	-
Hydraulic System - Steering
Steering System - Circuit	-	Pilot, Load Sensing	Pilot, Load Sensing	-
Steering System - Pump	-	Piston, Variable Displacement	Piston, Variable Displacement	-
Total Steering Angle	-	80 degrees	80°	-
Steering Cycle Times - Low Idle	-	7.6 s	4.9 s	-
Steering Cycle Times - High Idle	-	4.3 s	3.1 s	-
Maximum Flow at 1,400-1,850 rpm	-	-	70 gal/min	-
Steering Cut Off Pressure	-	-	4500 psi	-
Dimensions - Standard Lift - Approximate
B-Pin Height - Maximum Lift	-	28.8 ft	22.8 ft	-
Clearance at Maximum Lift	-	19.8 ft	15.2 ft	-
Dump Angle at Maximum Lift	-	–50.0 degrees	-49.5 degrees	-
Front Axle Centerline to Bucket Tip	-	21.9 ft	18 ft	-
Ground to Bumper Clearance	-	4.4 ft	3.8 ft	-
Ground to Center of Axles	-	6 ft	-	-
Ground to Lower Hitch Clearance	-	2.9 ft	2.2 ft	-
Ground to Top of Exhaust Stacks	-	23.2 ft	17 ft	-
Ground to Top of Hood	-	18.6 ft	13.1 ft	-
Ground to Top of ROPS	-	23.4 ft	18.3 ft	-
Maximum Overall Height - Bucket Raised	-	39.3 ft	30.8 ft	-
Maximum Overall Length	-	64.6 ft	50.8 ft	-
Note	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-	-
Rack Angle at Maximum Lift	-	59.5 degrees	-	-
Rack Back Angle - Carry	-	47.7 degrees	48.9 degrees	-
Rack Back Angle - Ground Level	-	39.7 degrees	40.2 degrees	-
Reach - Maximum Lift	-	9.6 ft	8.2 ft	-
Rear Axle - Centerline to Bumper	-	20.4 ft	13.5 ft	-
Tread Width	-	14.1 ft	10.83 ft	-
Wheel Base	-	22.3 ft	19.3 ft	-
Width - Over Tires - With Bulge	-	18.8 ft	14.74 ft	-
Ground to Center of Front Axle	-	-	4.3 ft	-
Rack Back Angle - Maximum Lift	-	-	56.9 degrees	-
Dimensions - High Lift - Approximate
B-Pin Height - Maximum Lift	-	31.6 ft	24.5 ft	-
Clearance at Maximum Lift	-	22.6 ft	17.2 ft	-
Dump Angle at Maximum Lift	-	–50.0 degrees	-48.1 degrees	-
Front Axle Centerline to Bucket Tip	-	24.2 ft	18.8 ft	-
Ground to Bumper Clearance	-	4.4 ft	3.8 ft	-
Ground to Center of Axles	-	6 ft	-	-
Ground to Lower Hitch Clearance	-	2.9 ft	2.2 ft	-
Ground to Top of Exhaust Stacks	-	23.2 ft	17 ft	-
Ground to Top of Hood	-	18.6 ft	13.1 ft	-
Ground to Top of ROPS	-	23.4 ft	18.3 ft	-
Maximum Overall Height - Bucket Raised	-	42.1 ft	32 ft	-
Maximum Overall Length	-	66.9 ft	51.6 ft	-
Note	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-	-
Rack Angle at Maximum Lift	-	59.4 degrees	-	-
Rack Back Angle - Carry	-	53.5 degrees	51.6 degrees	-
Rack Back Angle - Ground Level	-	45 degrees	42.5 degrees	-
Reach - Maximum Lift	-	9.4 ft	7.6 ft	-
Rear Axle - Centerline to Bumper	-	20.4 ft	13.5 ft	-
Tread Width	-	14.1 ft	10.83 ft	-
Wheel Base	-	22.3 ft	19.3 ft	-
Width - Over Tires - With Bulge	-	18.8 ft	14.75 ft	-
Rack Back Angle - Maximum Lift	-	-	56.2 degrees	-
Ground to Center of Front Axle	-	-	4.3 ft	-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	-	Positive Flow Control	Positive Flow Control	-
Lift/Tilt System - Pump	-	Variable Displacement Piston	Variable Displacement Piston	-
Maximum Flow at 1,700 rpm Engine Speed	-	541 gal/min	-	-
Relief Valve Setting - Lift/Tilt	-	5004 psi	5000 psi	-
Cylinders, Double Acting - Lift, Bore and Stroke	-	370 × 1713 mm (14.6 × 67.4 in)	-	-
Cylinders, Double Acting - Tilt, Bore and Stroke	-	310 × 1086 mm (12.2 × 42.8 in)	-	-
Pilot System	-	Open Loop and Pressure Reducing	-	-
Maximum Flow at 2,165 rpm	-	-	250 gal/min	-
Lift Cylinder - Bore	-	-	9.3 in	-
Lift Cylinder - Stroke	-	-	63.5 in	-
Tilt Cylinder - Bore	-	-	11.5 in	-
Tilt Cylinder - Stroke	-	-	41.5 in	-
Hydraulic Cycle Times
Rack Back	-	4.9 s	2.3 s	-
Raise	-	12.6 s	9 s	-
Dump	-	3.1 s	2.6 s	-
Lower Float Down	-	4.2 s	-	-
Rack Back - High Lift	-	-	2.3 s	-
Raise - High Lift	-	-	9 s	-
Dump - High Lift	-	-	2.6 s	-
Float Down	-	-	3.2 s	-
Float Down - High Lift	-	-	3.2 s	-
Total Hydraulic Cycle Time	-	-	17.1 s	-
Brakes
Brakes	-	ISO 3450:2011	ISO 3450:2011	-
Bucket Capacities
Bucket Range	-	-	-	4.0-14.5 m³ 5.25-19 yd³
Sound
Note (1)	-	-	-	For machines in European Union countries and in countries that adopt the EU Directives.
Note (2)	-	-	-	European Union Directive 2000/14/EC as amended by 2005/88/EC.
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*	-	-	-	110
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)	-	-	-	70 dB(A)
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)	-	-	-	107 dB(A)
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)	-	-	-	75
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)	-	-	-	70 dB(A)
Air Conditioning System
Air Conditioning	-	-	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).
Hydraulic System
Implement System - Maximum Operating Pressure	-	-	-	4975 psi
Hydraulic Cycle Time - Total	-	-	-	10.1 seconds
Dimensions
Note	-	-	-	All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.
Dimensions - High Lift
Centerline of Rear Axle to Edge of Counterweight	-	-	-	8.9 ft
Centerline of Rear Axle to Hitch	-	-	-	6.3 ft
Ground Clearance	-	-	-	1.5 ft
Height - Top of Exhaust Pipe	-	-	-	12.5 ft
Height - Top of Hood	-	-	-	10.1 ft
Height - Top of ROPS	-	-	-	12.7 ft
Hinge Pin Height at Carry	-	-	-	2.2 ft
Hinge Pin Height at Maximum Lift	-	-	-	15.7 ft
Lift Arm Clearance at Maximum Lift	-	-	-	13.6 ft
Overall Length - Without Bucket	-	-	-	27.5 ft
Tread Width	-	-	-	8 ft
Wheel Base	-	-	-	12.6 ft
Width over Tires (Loaded)	-	-	-	10.9 ft
Dimensions - Standard Lift
Centerline of Rear Axle to Edge of Counterweight	-	-	-	8.7 ft
Centerline of Rear Axle to Hitch	-	-	-	6.3 ft
Ground Clearance	-	-	-	456 mm
Height - Top of Exhaust Pipe	-	-	-	3764 mm
Height - Top of Hood	-	-	-	3064 mm
Height - Top of ROPS	-	-	-	3829 mm
Hinge Pin Height at Carry	-	-	-	2 ft
Hinge Pin Height at Maximum Lift	-	-	-	4554 mm
Lift Arm Clearance at Maximum Lift	-	-	-	3881 mm
Overall Length - Without Bucket	-	-	-	8155 mm
Tread Width	-	-	-	8 ft
Wheel Base	-	-	-	3800 mm
Width over Tires (Loaded)	-	-	-	10.9 ft

Compare Equipment Go Back

914 Compact Wheel Loader

995 Wheel Loader

992 Wheel Loader

980 XE

Engine

Weights

Buckets

Sustainability

Cab

Service Refill Capacities

Steering

Loader Hydraulic System

Transmission

Tires

Axles

Operating Specifications

Complete System Fill

Cooling System

Sound Performance - Standard

Sound Performance - Suppression

Hydraulic System - Steering

Dimensions - Standard Lift - Approximate

Dimensions - High Lift - Approximate

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Brakes

Bucket Capacities

Sound

Air Conditioning System

Hydraulic System

Dimensions

Dimensions - High Lift

Dimensions - Standard Lift

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us