CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    910 Compact Wheel Loader
    View Product
    988 Wheel Loader
    View Product Remove
    988 GC Wheel Loader
    View Product Remove

    Engine
    Maximum Gross Power 110 HP - -
    Rated Net Power - Rated Engine Speed 2200 r/min - -
    Maximum Gross Power - Rated Engine Speed 1800 r/min - -
    Rated Net Power - SAE J1349 99 HP - -
    Maximum Gross Power - ISO 14396 (metric) 112 HP - -
    Rated Net Power - ISO 9249 98 HP - -
    Maximum Gross Torque - SAE J1995 335 ft·lbf - -
    Maximum Gross Torque - ISO 14396 332 ft·lbf - -
    Maximum Net Torque - SAE J1349 329 ft·lbf - -
    Maximum Net Torque - ISO 9249 327 ft·lbf - -
    Displacement 220 in³ 1105 in³ 927 in³
    Bore 3.85 in 5.7 in 5.4 in
    Stroke 4.72 in 7.2 in 6.75 in
    Engine Model Cat C3.6 Cat® C18 ™ Cat® C15
    Emissions Engine meets Tier 4 Final/Stage V emission standards. U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards, Brazil MAR-1 and China Nonroad Stage IV emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA, and U.S. EPA Tier 2 and EU Stage II U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014
    Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. - -
    Maximum Gross Power - ISO 14396 110 HP - -
    Net Power - SAE J1349:2011 - 538 HP -
    Engine Power - ISO 14396:2002 - 580 HP -
    Gross Power - SAE J1995:2014 - 588 HP -
    Rated Speed - 1700/min 2000
    Peak Power Speed - 1500/rpm 1600
    Peak Torque - 1,200 rpm - 2230 lb/ft -
    Torque Rise - 58 % 16%
    Engine Power - ISO 14396 - - 449 HP
    Gross Power - SAE J1995 - - 456 HP
    Net Power - SAE J1349 - - 373 HP
    Peak Torque - 1,200 rpm - SAE J1995 - - 1778 ft·lbf

    Weights
    Operating Weight 18102 lb - -

    Buckets
    Bucket Capacities 1.3-3.5 m3 (1.7-4.6 yd3) 4.7-13 m3 (6.2-17 yd3) 6.4-7.6 m3 (8.3-10 yd3)
    Bucket Capacities - General Purpose 1.3-1.9 m³ (1.7-2.5 yd³) - -
    Bucket Capacities - Light Material 2.5-3.5 m³ (3.3-4.6 yd³) - -

    Sustainability
    Recyclability 95% - 96%

    Cab
    ROPS ISO 3471:2008 - -
    FOPS ISO 3449:2005 - -
    Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A). - -
    Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A). - -
    Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. - -
    Note (4) *The measurements were conducted with the cab doors and windows closed. - -

    Service Refill Capacities
    Cooling System 5.7 gal (US) 31.7 gal (US) 27 gal (US)
    Fuel Tank 43.6 gal (US) 188 gal (US) 141 gal (US)
    Hydraulic System - Including Tank 25.9 gal (US) - -
    Engine Crankcase 2.6 gal (US) - 9 gal (US)
    Hydraulic Tank 14.5 gal (US) - -
    Transmission 0.8 gal (US) 31.7 gal (US) 20 gal (US)
    Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. - Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a
    Axles - Front Center Differential 2 gal (US) - -
    Axles - Rear Center Differential 2 gal (US) - -
    Diesel Exhaust Fluid (DEF) Tank 4.8 gal (US) - -
    Coolant (Validated by Test Cell Fill Quantities) - 33 gal (US) -
    Crankcase - 15.9 gal (US) -
    Diesel Exhaust Fluid Tank - 8.7 gal (US) 5.5 gal (US)
    Transmission - Validated by Test Cell Fill Quantities - 29 gal (US) -
    Differential - Final Drives - Front - 49.1 gal (US) 49 gal (US)
    Differential - Final Drives - Rear - 49.1 gal (US) 45 gal (US)
    Hydraulic System Factory Fill - 125.5 gal (US) -
    Hydraulic System - Tank Only - 63.4 gal (US) -

    Steering
    Maximum Working Pressure - Steering Pump 2683 psi - -
    Steering Articulation Angle - Each Direction 40 ° - -
    Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 3.2 s - -
    Maximum Flow - Steering Pump 17 gal/min - -
    Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75 turns - -

    Loader Hydraulic System
    Hydraulic Cycle Time - Dump, at Maximum Reach 1.4 s - -
    Hydraulic Cycle Time - Total Cycle Time 12.5 s - -
    Maximum Working Pressure - Implement Pump 3408 psi - -
    Relief Pressure - Tilt Cylinder 4931 psi - -
    Hydraulic Cycle Time - Rackback 2.2 s - -
    Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 3046 psi - -
    Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2 s - -
    Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 3046 psi - -
    Maximum Flow - Implement Pump - 4th Function, Maximum Flow 24 gal/min - -
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow 24 gal/min - -
    Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7 s - -
    Maximum Flow - Implement Pump 32 gal/min - -

    Transmission
    Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. - -
    Forward and Reverse - Speed Range 3 25 mile/h - -
    Forward and Reverse - Speed Range 2* 12.5 mile/h - -
    Forward and Reverse - Speed Range 1* 6.3 mile/h - -
    Transmission Type - Cat planetary powershift Cat planetary power shift
    Forward - 1 - 4 mile/h 5 mile/h
    Forward - 2 - 7.2 mile/h 8 mile/h
    Forward - 3 - 12.7 mile/h -
    Forward - 4 - 21.6 mile/h -
    Reverse - 1 - 4.7 mile/h 5 mile/h
    Reverse - 2 - 8.3 mile/h 8 mile/h
    Reverse - 3 - 14.4 mile/h -
    Direct Drive - Forward 1 - Lock-up disabled Lock-up disabled
    Direct Drive - Forward 2 - 7.8 mile/h 8 mile/h
    Direct Drive - Forward 3 - 13.9 mile/h 14 mile/h
    Direct Drive - Forward 4 - 24.4 mile/h 24 mile/h
    Direct Drive - Reverse 1 - 5 mile/h Lock-up disabled
    Direct Drive - Reverse 2 - 8.9 mile/h 9 mile/h
    Direct Drive - Reverse 3 - 15.8 mile/h 16 mile/h
    Direct Drive - Reverse 4 - - 25.4 mile/h

    Tires
    Note (2) In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. - -
    Standard Size 15.5 R25 L2 XTLA - -
    Other Choices Include 17.5 R25 L2 XTLA; 15.5 R25 L3 XHA2; 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow - -
    Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. - -
    Note (1) Other tire choices are available. Contact your Cat dealer for details. - -

    Axles
    Front Fixed; Locking differential (standard) Fixed Fixed
    Rear Oscillating ±11 degrees; Locking differential (Standard) Trunnion Trunnion
    Oscillation Angle - 13 ° +/-12.5°

    Operating Specifications
    Operating Weight - 112574 lb 116858 lb
    Rated Payload - Quarry Face - 12.5 t 12.5 ton (US)
    Rated Payload - Loose Material - 16 t -
    Bucket Capacity Range - 4.7-13 m3 (6.2-17 yd3) 6.4-7.6 m3 (8.3-10 yd3)
    Cat Truck Match - Standard - 770～772 -
    Cat Truck Match - High Lift - 773～775 772/773/775

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - EH- Positive Flow Control, Flow Sharing EH - Load Sense
    Lift/Tilt System - Variable displacement piston 2X x 145 cc Variable displacement piston
    Maximum Flow at 1,400-1,860 rpm - 153 gal/min -
    Relief Valve Setting - Lift/Tilt - 4757 psi 4598 psi
    Cylinders, Double Acting - Lift, Bore and Stroke - 210 mm × 1050 mm (8.7 in × 41.3 in) 190 mm x 1216 mm (7.5 in x 48 in)
    Cylinders, Double Acting - Tilt, Bore and Stroke - 269 mm × 685 mm (8.7 in × 27 in) 170 mm x 722 mm (6.7 in x 28.4 in)
    Pilot System - Variable displacement piston Variable displacement piston
    Relief Valve Setting - Main - 551 psi -
    Maximum Flow at 2,165 rpm - - 159 gal/min
    Tilt Cylinder - Stroke - - 27 in

    Hydraulic Cycle Time (1,400-1,860 rpm)
    Rack Back - 4.5 s -
    Raise - 8 s -
    Dump - 2.2 s -
    Lower Float Down - 3.5 s -
    Total Hydraulic Cycle Time - Empty Bucket - 18.2 s -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing Pilot, load sensing
    Steering System - Pump - Piston, variable displacement Piston, variable displacement
    Maximum Flow - 71.3 gal/min 52 gal (US)
    Relief Valve Setting - Steering - 4351 psi 4000 psi
    Total Steering Angle - 86 ° 70°
    Steering Cycle Times - High Idle - 3.4 s 3 s
    Steering Cycle Times - Low Idle - 5.6 s 5.2 s

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Brakes
    Brakes - ISO 3450:2011 ISO 3450:2011

    Operator's Cab
    ROPS/FOPS - ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards

    Sound Performance - Tier 4 Final / Stage V - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - 73 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - 111 dB(A) -

    Sound Performance - Tier 3 / Stage III - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - 73 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - 112 dB(A) -

    Dimensions (Approximate) - Standard Lift Linkage
    Ground to Top of ROPS - 13.8 ft -
    Ground to Top of Exhaust Stacks - 14.8 ft -
    Ground to Top of Hood - 10.9 ft -
    Rear Axle - Centerline to Bumper - 10.5 ft -
    Front Axle Centerline to Bucket Tip - 14 ft -
    Wheel Base - 14.9 ft -
    Maximum Overall Length - 39.3 ft -
    Ground to Lower Hitch Clearance - 1.9 ft -
    Clearance at Maximum Lift - 11.9 ft -
    B-Pin Height - Maximum Lift - 18 ft -
    Maximum Overall Height - Bucket Raised - 24.5 ft -
    Reach - Maximum Lift - 6.5 ft -

    Dimensions (Approximate) - High Lift Linkage
    Ground to Top of ROPS - 13.8 ft -
    Ground to Top of Exhaust Stacks - 14.8 ft -
    Ground to Top of Hood - 10.9 ft -
    Rear Axle - Centerline to Bumper - 10.5 ft -
    Front Axle Centerline to Bucket Tip - 15.3 ft -
    Wheel Base - 14.9 ft -
    Maximum Overall Length - 40.7 ft -
    Ground to Lower Hitch Clearance - 1.9 ft -
    Clearance at Maximum Lift - 13.3 ft -
    B-Pin Height - Maximum Lift - 19.3 ft -
    Maximum Overall Height - Bucket Raised - 25.8 ft -
    Reach - Maximum Lift - 6.8 ft -

    Hydraulic Cycle Times
    Rack Back - - 3.8 s
    Raise - - 7.5 s
    Dump - - 3 s
    Lower Float Down - - 4.6 s
    Total Hydraulic Cycle Time - Empty Bucket - - 18.9 s

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) - - 72 dB(A)
    Machine Sound Level (ISO 6395) - - 110 dB(A)
    Note (1) - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
    Note (2) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (3) - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.

    Dimensions (Approximate) - High Lift
    Ground to Top of ROPS - - 13.5 ft
    Ground to Top of Exhaust Stacks - - 13.3 ft
    Ground to Top of Hood - - 10.7 ft
    Rear Axle - Centerline to Bumper - - 10.3 ft
    Front Axle Centerline to Bucket Tip - - 15.7 ft
    Wheel Base - - 12.5 ft
    Maximum Overall Length - - 39.5 ft
    Ground to Lower Hitch Clearance - - 1.5 ft
    Clearance at Maximum Lift - - 12 ft
    B-Pin Height - Maximum Lift - - 18.7 ft
    Maximum Overall Height - Bucket Raised - - 25 ft
    Reach - Maximum Lift - - 7.7 ft
    Note - - Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires.
    Add a Similar Product: