Engine meets Tier 4 Final/Stage V emission standards.
U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014
-
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
-
-
Maximum Gross Power - ISO 14396
110 HP
-
-
Net Power - SAE J1349
-
538 HP
-
Engine Power - ISO 14396:2002
-
580 HP
-
Gross Power - SAE J1995:2014
-
588 HP
-
Rated Speed
-
1,700 rpm
-
Peak Power Speed
-
1,500 rpm
-
Peak Torque - 1,200 rpm - SAE J1995
-
2230 ft·lbf
-
Torque Rise
-
58%
-
Weights
Operating Weight
18102 lb
-
-
Buckets
Bucket Capacities
1.3-3.5 m3 (1.7-4.6 yd3)
4.7-13 m3 (6.2-17 yd3)
-
Bucket Capacities - General Purpose
1.3-1.9 m³ (1.7-2.5 yd³)
-
-
Bucket Capacities - Light Material
2.5-3.5 m³ (3.3-4.6 yd³)
-
-
Sustainability
Recyclability
95%
96%
-
Cab
ROPS
ISO 3471:2008
-
-
FOPS
ISO 3449:2005
-
-
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
-
-
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
-
-
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
-
-
Note (4)
*The measurements were conducted with the cab doors and windows closed.
-
-
Service Refill Capacities
Cooling System
5.7 gal (US)
-
-
Fuel Tank
43.6 gal (US)
147 gal (US)
-
Hydraulic System - Including Tank
25.9 gal (US)
-
-
Engine Crankcase
2.6 gal (US)
16 gal (US)
-
Hydraulic Tank
14.5 gal (US)
-
-
Transmission
0.8 gal (US)
16 gal (US)
-
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
All nonroad Tier 4 Final/Stage V diesel engines are required to use: – The machine has the flexibility to run on either ultra-low-sulfur diesel fuel (ULSD with 15 ppm of sulfur or less). – Cat engines are compatible with the following renewable, alternati
-
Axles - Front Center Differential
2 gal (US)
-
-
Axles - Rear Center Differential
2 gal (US)
-
-
Diesel Exhaust Fluid (DEF) Tank
4.8 gal (US)
-
-
Cooling System - Jacket Water
-
30 gal (US)
-
Cooling Systems - Power Train
-
8 gal (US)
-
Diesel Exhaust Fluid Tank
-
8.7 gal (US)
-
Differential - Final Drives - Front
-
49 gal (US)
-
Differential - Final Drives - Rear
-
49 gal (US)
-
Hydraulic System - Implement/Steering
-
126 gal (US)
-
Steering
Maximum Working Pressure - Steering Pump
2683 psi
-
-
Steering Articulation Angle - Each Direction
40 °
-
-
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
3.2 s
-
-
Maximum Flow - Steering Pump
17 gal/min
-
-
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.75 turns
-
-
Loader Hydraulic System
Hydraulic Cycle Time - Dump, at Maximum Reach
1.4 s
-
-
Hydraulic Cycle Time - Total Cycle Time
12.5 s
-
-
Maximum Working Pressure - Implement Pump
3408 psi
-
-
Relief Pressure - Tilt Cylinder
4931 psi
-
-
Hydraulic Cycle Time - Rackback
2.2 s
-
-
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
3046 psi
-
-
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
5.2 s
-
-
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
3046 psi
-
-
Maximum Flow - Implement Pump - 4th Function, Maximum Flow
24 gal/min
-
-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow
24 gal/min
-
-
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
3.7 s
-
-
Maximum Flow - Implement Pump
32 gal/min
-
-
Transmission
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
-
-
Forward and Reverse - Speed Range 3
25 mile/h
-
-
Forward and Reverse - Speed Range 2*
12.5 mile/h
-
-
Forward and Reverse - Speed Range 1*
6.3 mile/h
-
-
Transmission Type
-
Cat switched reluctance electric drive
-
Forward 1 (virtual)
-
4.3 mile/h
-
Forward 2 (virtual)
-
7 mile/h
-
Forward 3 (virtual)
-
13.8 mile/h
-
Forward 4 (virtual)
-
20 mile/h
-
Reverse 1 (virtual)
-
4.3 mile/h
-
Reverse 2 (virtual)
-
7 mile/h
-
Reverse 3 (virtual)
-
17.5 mile/h
-
Tires
Note (2)
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
-
Brakes
Brakes
-
ISO 3450:2011
-
Operator's Cab
ROPS/FOPS
-
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
-
Sound Performance - Tier 4 Final / Stage V - Standard
Operator Sound Pressure Level (ISO 6396:2008)
-
72 dB(A)
-
Machine Sound Power Level (ISO 6395:2008)
-
109 dB(A)
-
Sound Performance - Tier 3 / Stage III - Standard
Operator Sound Pressure Level (ISO 6396:2008)
-
72 dB(A)
-
Machine Sound Power Level (ISO 6395:2008)
-
110 dB(A)
-
Dimensions (Approximate) - Standard Lift
Ground to Top of ROPS
-
13.8 ft
-
Ground to Top of Exhaust Stacks
-
14.8 ft
-
Ground to Top of Hood
-
10.9 ft
-
Ground to Bumper Clearance
-
3.1 ft
-
Rear Axle - Centerline to Bumper
-
10.5 ft
-
Front Axle Centerline to Bucket Tip
-
14 ft
-
Wheel Base
-
14.9 ft
-
Maximum Overall Length
-
39.3 ft
-
Ground to Lower Hitch Clearance
-
1.9 ft
-
Ground to Center of Axles
-
3.2 ft
-
Clearance at Maximum Lift
-
11.9 ft
-
B-Pin Height - Maximum Lift
-
18 ft
-
Maximum Overall Height - Bucket Raised
-
24.5 ft
-
Reach - Maximum Lift
-
6.5 ft
-
Note
-
Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
-
Dimensions (Approximate) - High Lift
Ground to Top of ROPS
-
13.8 ft
-
Ground to Top of Exhaust Stacks
-
14.8 ft
-
Ground to Top of Hood
-
10.9 ft
-
Ground to Bumper Clearance
-
3.1 ft
-
Rear Axle - Centerline to Bumper
-
10.5 ft
-
Front Axle Centerline to Bucket Tip
-
15.3 ft
-
Wheel Base
-
14.9 ft
-
Maximum Overall Length
-
40.7 ft
-
Ground to Lower Hitch Clearance
-
1.9 ft
-
Ground to Center of Axles
-
3.2 ft
-
Clearance at Maximum Lift
-
13.3 ft
-
B-Pin Height - Maximum Lift
-
19.3 ft
-
Maximum Overall Height - Bucket Raised
-
25.8 ft
-
Reach - Maximum Lift
-
6.8 ft
-
Note
-
Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.