Engine meets Tier 4 Final/Stage V emission standards.
U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent
-
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
-
-
Maximum Gross Power - ISO 14396
110 HP
-
-
Net Power
-
814 HP
-
Rated Speed
-
1750 rpm
-
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard
-
900 HP
-
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient
-
937 HP
-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard
-
907 HP
-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient
-
944 HP
-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard
-
884 HP
-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient
-
921 HP
-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard
-
893 HP
-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient
-
931 HP
-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard
-
814 HP
-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient
-
814 HP
-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard
-
823 HP
-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
-
-
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
-
-
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
-
-
Note (4)
*The measurements were conducted with the cab doors and windows closed.
-
-
Service Refill Capacities
Cooling System
5.7 gal (US)
-
-
Fuel Tank
43.6 gal (US)
385.7 gal (US)
-
Hydraulic System - Including Tank
25.9 gal (US)
-
-
Engine Crankcase
2.6 gal (US)
-
-
Hydraulic Tank
14.5 gal (US)
-
-
Transmission
0.8 gal (US)
51.5 gal (US)
-
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
-
-
Axles - Front Center Differential
2 gal (US)
-
-
Axles - Rear Center Differential
2 gal (US)
-
-
Diesel Exhaust Fluid (DEF) Tank
4.8 gal (US)
-
-
Cooling Systems
-
59.4 gal (US)
-
Crankcase
-
31.7 gal (US)
-
Differential - Final Drives - Front
-
96.4 gal (US)
-
Differential - Final Drives - Rear
-
96.4 gal (US)
-
Hydraulic System Factory Fill (Implement)
-
104.1 gal (US)
-
Hydraulic Tank - Implement
-
60.2 gal (US)
-
Hydraulic Factory Fill (Steering)
-
32.5 gal (US)
-
Hydraulic Tank (Steering Tank Only)
-
26.3 gal (US)
-
Steering
Maximum Working Pressure - Steering Pump
2683 psi
-
-
Steering Articulation Angle - Each Direction
40 °
-
-
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
3.2 s
-
-
Maximum Flow - Steering Pump
17 gal/min
-
-
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.75 turns
-
-
Loader Hydraulic System
Hydraulic Cycle Time - Dump, at Maximum Reach
1.4 s
-
-
Hydraulic Cycle Time - Total Cycle Time
12.5 s
-
-
Maximum Working Pressure - Implement Pump
3408 psi
-
-
Relief Pressure - Tilt Cylinder
4931 psi
-
-
Hydraulic Cycle Time - Rackback
2.2 s
-
-
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
3046 psi
-
-
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
5.2 s
-
-
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
3046 psi
-
-
Maximum Flow - Implement Pump - 4th Function, Maximum Flow
24 gal/min
-
-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow
24 gal/min
-
-
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
3.7 s
-
-
Maximum Flow - Implement Pump
32 gal/min
-
-
Transmission
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
-
-
Forward and Reverse - Speed Range 3
25 mile/h
-
-
Forward and Reverse - Speed Range 2*
12.5 mile/h
-
-
Forward and Reverse - Speed Range 1*
6.3 mile/h
-
-
Transmission Type
-
Cat Planetary Powershift
-
Forward - 1
-
4.3 mile/h
-
Forward - 2
-
7.4 mile/h
-
Forward - 3
-
12.7 mile/h
-
Direct Drive - Forward 1
-
Disabled
-
Direct Drive - Forward 2
-
8 mile/h
-
Direct Drive - Forward 3
-
14 mile/h
-
Reverse - 1
-
4.7 mile/h
-
Reverse - 2
-
8.1 mile/h
-
Reverse - 3
-
13.9 mile/h
-
Direct Drive - Reverse 1
-
5 mile/h
-
Direct Drive - Reverse 2
-
8.8 mile/h
-
Direct Drive - Reverse 3
-
15.3 mile/h
-
Tires
Note (2)
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.