Engine meets Tier 4 Final/Stage V emission standards.
U.S. EPA Tier 4 Final/EU Stage V or
U.S. EPA Tier 1 equivalent
-
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
-
-
Maximum Gross Power - ISO 14396
110 HP
-
-
Engine Power - ISO 14396
-
1847 HP
-
Gross Power - SAE J1995
-
1870 HP
-
Net Power - SAE J1349 - Standard Ambient
-
1739 HP
-
Net Power - SAE J1349 - High Ambient
-
1696 HP
-
Peak Torque - 1,200 rpm - SAE J1995
-
8549 lb/ft
-
Torque Rise
-
39%
-
Note (1)
-
The power ratings apply when tested under the reference conditions for the specified standard.
-
Note (2)
-
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.
-
Note (3)
-
The gross power advertised is with the fan at maximum speed.
-
Weights
Operating Weight
18102 lb
-
-
Buckets
Bucket Capacities
1.3-3.5 m3 (1.7-4.6 yd3)
-
-
Bucket Capacities - General Purpose
1.3-1.9 m³ (1.7-2.5 yd³)
-
-
Bucket Capacities - Light Material
2.5-3.5 m³ (3.3-4.6 yd³)
-
-
Sustainability
Recyclability
95%
-
-
Cab
ROPS
ISO 3471:2008
-
-
FOPS
ISO 3449:2005
-
-
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
-
-
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
-
-
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
-
-
Note (4)
*The measurements were conducted with the cab doors and windows closed.
-
-
Service Refill Capacities
Cooling System
5.7 gal (US)
-
-
Fuel Tank
43.6 gal (US)
-
-
Hydraulic System - Including Tank
25.9 gal (US)
-
-
Engine Crankcase
2.6 gal (US)
-
-
Hydraulic Tank
14.5 gal (US)
-
-
Transmission
0.8 gal (US)
-
-
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
-
-
Axles - Front Center Differential
2 gal (US)
-
-
Axles - Rear Center Differential
2 gal (US)
-
-
Diesel Exhaust Fluid (DEF) Tank
4.8 gal (US)
-
-
Steering
Maximum Working Pressure - Steering Pump
2683 psi
-
-
Steering Articulation Angle - Each Direction
40 °
-
-
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
3.2 s
-
-
Maximum Flow - Steering Pump
17 gal/min
-
-
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.75 turns
-
-
Loader Hydraulic System
Hydraulic Cycle Time - Dump, at Maximum Reach
1.4 s
-
-
Hydraulic Cycle Time - Total Cycle Time
12.5 s
-
-
Maximum Working Pressure - Implement Pump
3408 psi
-
-
Relief Pressure - Tilt Cylinder
4931 psi
-
-
Hydraulic Cycle Time - Rackback
2.2 s
-
-
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
3046 psi
-
-
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
5.2 s
-
-
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
3046 psi
-
-
Maximum Flow - Implement Pump - 4th Function, Maximum Flow
24 gal/min
-
-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow
24 gal/min
-
-
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
3.7 s
-
-
Maximum Flow - Implement Pump
32 gal/min
-
-
Transmission
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Travel speeds based on 58/85-57 tires.
-
Forward and Reverse - Speed Range 3
25 mile/h
-
-
Forward and Reverse - Speed Range 2*
12.5 mile/h
-
-
Forward and Reverse - Speed Range 1*
6.3 mile/h
-
-
Transmission Type
-
Cat Planetary Power Shift
-
Forward - 1
-
4.6 mile/h
-
Forward - 2
-
8 mile/h
-
Forward - 3
-
13.6 mile/h
-
Reverse - 1
-
5 mile/h
-
Reverse - 2
-
8.8 mile/h
-
Reverse - 3
-
14.9 mile/h
-
Direct Drive - Forward 1
-
Lock-up disables
-
Direct Drive - Forward 2
-
8.7 mile/h
-
Direct Drive - Forward 3
-
15.2 mile/h
-
Direct Drive - Reverse 1
-
Lock-up disables
-
Direct Drive - Reverse 2
-
9.6 mile/h
-
Direct Drive - Reverse 3
-
16.8 mile/h
-
Tires
Note (2)
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Rated Payload - Standard Lift (Low to Moderate Digging Resistance)
-
60 ton (US)
-
Rated Payload - Standard Lift (Moderate to High Digging Resistance)
-
50 ton (US)
-
Rated Payload - High Lift (Low to Moderate Digging Resistance)
-
55 ton (US)
-
Rated Payload - High Lift (Moderate to High Digging Resistance)
-
50 ton (US)
-
Note
-
*Please contact your local dealer to determine if your application is suitable for this increased rated payload.
-
Cat Truck Match - Standard
-
785/789
-
Cat Truck Match - High Lift
-
789/793/794
-
Complete System Fill
Fuel Tank - Standard
-
856 gal (US)
-
Fuel Tank - With 24 hr Attachment
-
1414 gal (US)
-
Cooling System
-
138 gal (US)
-
Engine Crankcase
-
76 gal (US)
-
Transmission
-
110 gal (US)
-
Differential - Final Drives - Front
-
220 gal (US)
-
Differential - Final Drives - Rear
-
200 gal (US)
-
Hydraulic Tank - Implement and Hydraulic Fan
-
270 gal (US)
-
Hydraulic Tank - Steering and Braking
-
100 gal (US)
-
Oil Renewal System (ORS)*
-
20 gal (US)
-
Note
-
*Not available on Tier 4 Final/Stage V machines. Not available in all regions.
-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard
-
109.4 °F
-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)
-
131 °F
-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)
-
127.4 °F
-
Sound Performance - Standard
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent
-
74 dB(A)
-
Machine Sound Level (ISO 6395:2008)
-
119 dB(A)
-
Note
-
The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
-
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent
-
73 dB(A)
-
Machine Sound Level (ISO 6395:2008)
-
117 dB(A)
-
Note
-
The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
-
Hydraulic System - Steering
Steering System - Circuit
-
Pilot, Load Sensing
-
Steering System - Pump
-
Piston, Variable Displacement
-
Total Steering Angle
-
80 degrees
-
Steering Cycle Times - Low Idle
-
7.6 s
-
Steering Cycle Times - High Idle
-
4.3 s
-
Dimensions - Standard Lift - Approximate
B-Pin Height - Maximum Lift
-
28.8 ft
-
Clearance at Maximum Lift
-
19.8 ft
-
Dump Angle at Maximum Lift
-
–50.0 degrees
-
Front Axle Centerline to Bucket Tip
-
21.9 ft
-
Ground to Bumper Clearance
-
4.4 ft
-
Ground to Center of Axles
-
6 ft
-
Ground to Lower Hitch Clearance
-
2.9 ft
-
Ground to Top of Exhaust Stacks
-
23.2 ft
-
Ground to Top of Hood
-
18.6 ft
-
Ground to Top of ROPS
-
23.4 ft
-
Maximum Overall Height - Bucket Raised
-
39.3 ft
-
Maximum Overall Length
-
64.6 ft
-
Note
-
Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
-
Rack Angle at Maximum Lift
-
59.5 degrees
-
Rack Back Angle - Carry
-
47.7 degrees
-
Rack Back Angle - Ground Level
-
39.7 degrees
-
Reach - Maximum Lift
-
9.6 ft
-
Rear Axle - Centerline to Bumper
-
20.4 ft
-
Tread Width
-
14.1 ft
-
Wheel Base
-
22.3 ft
-
Width - Over Tires - With Bulge
-
18.8 ft
-
Dimensions - High Lift - Approximate
B-Pin Height - Maximum Lift
-
31.6 ft
-
Clearance at Maximum Lift
-
22.6 ft
-
Dump Angle at Maximum Lift
-
–50.0 degrees
-
Front Axle Centerline to Bucket Tip
-
24.2 ft
-
Ground to Bumper Clearance
-
4.4 ft
-
Ground to Center of Axles
-
6 ft
-
Ground to Lower Hitch Clearance
-
2.9 ft
-
Ground to Top of Exhaust Stacks
-
23.2 ft
-
Ground to Top of Hood
-
18.6 ft
-
Ground to Top of ROPS
-
23.4 ft
-
Maximum Overall Height - Bucket Raised
-
42.1 ft
-
Maximum Overall Length
-
66.9 ft
-
Note
-
Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.