Compare Equipment Go Back

R2900G Underground Mining Loader
R3000H Underground Mining Loader
R1600H Underground Mining Loader

Engine

Engine Model Cat® C15 Cat® C15 Cat® C11
Engine Power - Tier 3 Engine - ISO 14396:2002 401 HP 401 HP 271 HP
Engine Power - VR Engine - ISO 14396:2002 401 HP 401 HP 271 HP
Bore 5.4 in 5.4 in 5.1 in
Stroke 6.8 in 6.8 in 5.5 in
Displacement 927.9 in³ 927.6 in³ 680.4 in³
Note (1) Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
Note (2) All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat All rating conditions are based on ISO/TR 14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifica All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat
Note (3) No engine derating required up to 591 m (1,938 ft) altitude. No engine derating required up to 3050 m (10,006 ft) altitude for equivalent Tier 3 engines, and 3506 m (11,502 ft) for VR engines. No engine derating required up to 3048 m (10,000 ft) for Tier 3 Engine and 1828 m (6,000 ft) for VR Engine.
Note (4) Optional Ventilation Reduction Package available. Optional Ventilation Reduction package available. Optional Ventilation Reduction package available.
Note (5) Optional Tier 3 engine package emits equivalent to U.S. EPA Tier 3 and EU Stage IIIA. Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available. Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU Stage IIIA is also available.

Operating Specifications

Nominal Payload Capacity 37920 lb 44092 lb 22487 lb
Gross Machine Mass 155095 lb 180779 lb 97453 lb
Static Tipping Load - Straight Ahead - Lift Arms Horizontal 88015 lb 104199 lb 57110 lb
Static Tipping Load - Full Turn - Lift Arms Horizontal 75109 lb - 46067 lb
Breakout Force - SAE 60298 lb 61773 lb -
Static Tipping Full Turn Ahead Lift Arms Horizontal - 88191 lb -
Breakout Force - Tilt (ISO) - - 39524 lb
Breakout Force - Lift (ISO) - - 42333 lb

Bucket Capacities

Bucket Capacity 6.3-8.9 m³ (8.2-11.6 yd³) - -
Dump Bucket - 1 8.2 yd³ - 5.5 yd³
Dump Bucket - 2 9.4 yd³ 12.4 yd³ -
Dump Bucket - 3 10.9 yd³ 13.7 yd³ 7.3 yd³
Dump Bucket - 4 11.6 yd³ - 7.7 yd³
Bucket Capacities - 8.9-11.6 m³ (11.6-15.2 yd³) 4.2-5.9 m³ (5.5-7.7 yd³)
Dump Bucket - 1 - Standard Bucket - 11.6 yd³ -
Light Material Bucket - 15.2 yd³ -
Dump Bucket - 2 - Standard Bucket - - 6.3 yd³
Ejector Bucket - - 6.3 yd³
Bolt Together Bucket - - 6.9 yd³

Service Refill Capacities

Engine Crankcase 9 gal (US) 9 gal (US) -
Transmission 16.4 gal (US) 16.4 gal (US) 12.4 gal (US)
Hydraulic Tank 37 gal (US) 37 gal (US) 33 gal (US)
Cooling System 19.8 gal (US) 19.8 gal (US) 16.1 gal (US)
Front Differential and Final Drives 31.4 gal (US) 31.4 gal (US) 21.1 gal (US)
Rear Differential and Final Drives 33.5 gal (US) 33.5 gal (US) 21.1 gal (US)
Front Differential and Final Drives - With Axle Oil Cooling System 42 gal (US) 42 gal (US) -
Rear Differential and Final Drives - With Axle Oil Cooling System 44.1 gal (US) 44.1 gal (US) -
Fuel Tank - Dual 376.4 gal (US) - -
Fuel Tank - 406.5 gal (US) 105.7 gal (US)
Engine Crankcase - With Filter - - 8.98 gal (US)
Secondary Fuel Tank - If Equipped - - 87.2 gal (US)

Standards

Brakes ISO 3450, AS2958.1, CAN-CSA424.30-M90 - -
Cab - FOPS ISO 3449, SAE J231, AS2294.3, EN13627 - -
Cab - ROPS ISO 3471, SAE J1040, AS2294.2, EN13510 - -
Standards - Rollover Protective Structure (ROPS)/Falling Object Protective Structure (FOPS) Certified Cab ROPS/FOPS Certified Cab

Weights

Operating Mass* 110692 lb 128448 lb 66469 lb
Operating Mass* - Front Axle 50832 lb 54558 lb 28404 lb
Operating Mass* - Rear Axle 59860 lb 73853 lb 38065 lb
Operating Mass + Rated Payload* 148611 lb 172540 lb 88956 lb
Operating Mass + Rated Payload* - Front Axle 110716 lb 125187 lb 62011 lb
Operating Mass + Rated Payload* - Rear Axle 37895 lb 47316 lb 26944 lb
Note *Calculated Weight. *Calculated weight. *Calculated weights.

Hydraulic Cycle Times

Raise 9.2 s 8.8 s 7.6 s
Dump 3.4 s 1.85 s 1.6 s
Lower, Empty, Float Down 3.1 s 3.54 s 2 s
Total Cycle Time 15.7 s 14.2 s 11.2 s

Turning Dimensions

Outside Clearance Radius 288.3 in - -
Inner Clearance Radius 133.2 in - -
Axle Oscillation 8 ° 10°
Articulation Angle 42.5° 42.5 ° 42.5°
Outside Clearance Radius** - 296.7 in -
Inner Clearance Radius** - 127.8 in -
Note - **Clearance dimensions are for reference only. *Clearance dimensions are for reference only.
Outside Clearance Radius* - - 261.3 in
Inner Clearance Radius* - - 129.6 in

Transmission

Forward - 1 3.4 mile/h 3 mile/h 2.8 mile/h
Forward - 2 6 mile/h 5.7 mile/h 5.6 mile/h
Forward - 3 10.7 mile/h 10.2 mile/h 10.4 mile/h
Forward - 4 18.5 mile/h 17.5 mile/h 17.1 mile/h
Reverse - 1 4.1 mile/h 4.1 mile/h 3.1 mile/h
Reverse - 2 7.3 mile/h 7.1 mile/h 6.8 mile/h
Reverse - 3 13 mile/h 12.7 mile/h 11.8 mile/h
Reverse - 4 22 mile/h 19.4 mile/h 18.2 mile/h

Tires

Tire Size 29.5 × 29 35/65 R33 18 × R25
Add a Similar Product:
  • R1300G Underground Mining Loader Add
  • R1700 Underground Mining Loader Add