Compare Equipment Go Back
 R1300G Underground Mining Loader |
 R3000H Underground Mining Loader |
 R1700 Underground Mining Loader |
 R1600H Underground Mining Loader |
|
Engine |
||||
|---|---|---|---|---|
| Engine Model | Cat® 3306B DITA | Cat® C15 | Cat® C13 | Cat® C11 |
| Engine Power - ISO 14396:2002 | 157 HP | - | - | - |
| Bore | 4.75 in | 5.4 in | - | 5.1 in |
| Stroke | 6 in | 6.8 in | - | 5.5 in |
| Displacement | 640.75 in³ | 927.6 in³ | - | 680.4 in³ |
| Note (1) | Power ratings apply at a rated speed of 2,200 rpm when tested under the reference conditions for the specified standard. | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. | Power ratings apply at a rated speed of 1,800 rpm for LRCs (VR and Tier 3/Stage IIIA) engines when tested under the reference conditions for the specified standard. | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. |
| Note (2) | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat | All rating conditions are based on ISO/TR 14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifica | Power ratings apply at a rated speed of 2,050 rpm for HRC (Stage V) engine when tested under the reference conditions for the specified standard. | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat |
| Note (3) | Engine derate will commence at an altitude of 4500 m (14,763.7 ft). | No engine derating required up to 3050 m (10,006 ft) altitude for equivalent Tier 3 engines, and 3506 m (11,502 ft) for VR engines. | All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications | No engine derating required up to 3048 m (10,000 ft) for Tier 3 Engine and 1828 m (6,000 ft) for VR Engine. |
| Engine Power - Tier 3 Engine - ISO 14396:2002 | - | 401 HP | 361 HP | 271 HP |
| Engine Power - VR Engine - ISO 14396:2002 | - | 401 HP | 361 HP | 271 HP |
| Note (4) | - | Optional Ventilation Reduction package available. | No engine derating required up to 2895 m (9,500 ft) altitude for Stage V engines, 3505 m (11,500 ft) altitude for Tier 3/Stage IIIA engines, and 3200 m (10,500 ft) for Tier 2/Stage II VR engines. | Optional Ventilation Reduction package available. |
| Note (5) | - | Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available. | Optional Ventilation Reduction package available. | Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU Stage IIIA is also available. |
| Engine Power - Stage V Engine - ISO 14396:2002 | - | - | 345 HP | - |
| Note (6) | - | - | Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available. | - |
| Note (7) | - | - | Optional engine meeting the U.S. EPA Tier 4 Final and EU Stage V emission standards is also available. | - |
Operating Specifications |
||||
| Nominal Payload Capacity | 14991 lb | 44092 lb | 33069 lb | 22487 lb |
| Gross Machine Mass | 65482 lb | 180779 lb | - | 97453 lb |
| Static Tipping Load - Straight Ahead - Lift Arms Horizontal | 45360 lb | 104199 lb | 83218 lb | 57110 lb |
| Static Tipping Load - Full Turn - Lift Arms Horizontal | 39397 lb | - | 69635 lb | 46067 lb |
| Breakout Force - SAE | 26504 lb | 61773 lb | - | - |
| Static Tipping Full Turn Ahead Lift Arms Horizontal | - | 88191 lb | - | - |
| Gross Machine Mass - Loaded | - | - | 138316 lb | - |
| Breakout Force - Lift and Tilt | - | - | 53330 lb | - |
| Breakout Force - Tilt (ISO) | - | - | - | 39524 lb |
| Breakout Force - Lift (ISO) | - | - | - | 42333 lb |
Weights |
||||
| Operating Mass* | 45691 lb | 128448 lb | 95189 lb | 66469 lb |
| Operating Mass* - Front Axle | 16810 lb | 54558 lb | 38358 lb | 28404 lb |
| Operating Mass* - Rear Axle | 28881 lb | 73853 lb | 56831 lb | 38065 lb |
| Operating Mass + Rated Payload* | 60682 lb | 172540 lb | 128258 lb | 88956 lb |
| Operating Mass + Rated Payload* - Front Axle | 41105 lb | 125187 lb | 91412 lb | 62011 lb |
| Operating Mass + Rated Payload* - Rear Axle | 19577 lb | 47316 lb | 36846 lb | 26944 lb |
| Note | *Calculated weights. | *Calculated weight. | *Calculated weights. | *Calculated weights. |
Transmission |
||||
| Forward - 1 | 2.8 mile/h | 3 mile/h | 3 mile/h | 2.8 mile/h |
| Forward - 2 | 4.8 mile/h | 5.7 mile/h | 5.7 mile/h | 5.6 mile/h |
| Forward - 3 | 9.3 mile/h | 10.2 mile/h | 10.2 mile/h | 10.4 mile/h |
| Forward - 4 | 16.3 mile/h | 17.5 mile/h | 17.9 mile/h | 17.1 mile/h |
| Reverse - 1 | 2.8 mile/h | 4.1 mile/h | 3.7 mile/h | 3.1 mile/h |
| Reverse - 2 | 4.8 mile/h | 7.1 mile/h | 6.5 mile/h | 6.8 mile/h |
| Reverse - 3 | 9.2 mile/h | 12.7 mile/h | 11.6 mile/h | 11.8 mile/h |
| Reverse - 4 | 14.3 mile/h | 19.4 mile/h | 20.2 mile/h | 18.2 mile/h |
Hydraulic Cycle Times |
||||
| Raise | 5 s | 8.8 s | 6.8 s | 7.6 s |
| Dump | 2 s | 1.85 s | 3.3 s | 1.6 s |
| Lower, Empty, Float Down | 2.3 s | 3.54 s | 2.9 s | 2 s |
| Total Cycle Time | 9.3 s | 14.2 s | 13.2 s | 11.2 s |
Bucket Capacities |
||||
| Dump Bucket - 1 | 3.2 yd³ | - | - | 5.5 yd³ |
| Dump Bucket - 2 | 3.7 yd³ | 12.4 yd³ | 8 yd³ | - |
| Dump Bucket - 3 - Standard Bucket | 4.1 yd³ | - | - | - |
| Dump Bucket - 4 | 4.4 yd³ | - | 9.4 yd³ | 7.7 yd³ |
| Ejector Bucket | 3.1 yd³ | - | 7.6 yd³ | 6.3 yd³ |
| Bucket Capacities | - | 8.9-11.6 m³ (11.6-15.2 yd³) | 5.7-8.6 m³ (7.5-11.2 yd³) | 4.2-5.9 m³ (5.5-7.7 yd³) |
| Dump Bucket - 1 - Standard Bucket | - | 11.6 yd³ | 7.5 yd³ | - |
| Dump Bucket - 3 | - | 13.7 yd³ | 8.6 yd³ | 7.3 yd³ |
| Light Material Bucket | - | 15.2 yd³ | 11.2 yd³ | - |
| Dump Bucket - 5 | - | - | 9.8 yd³ | - |
| Dump Bucket - 6 | - | - | 10.5 yd³ | - |
| Bolt Together Bucket (1) | - | - | 8.9 yd³ | - |
| Bolt Together Bucket (2) | - | - | 9.8 yd³ | - |
| Dump Bucket - 2 - Standard Bucket | - | - | - | 6.3 yd³ |
| Bolt Together Bucket | - | - | - | 6.9 yd³ |
Turning Dimensions |
||||
| Outside Clearance Radius | 225.1 in | - | 272 in | - |
| Inner Clearance Radius | 111.2 in | - | 123.5 in | - |
| Axle Oscillation | 10° | 8 ° | 8° | 10° |
| Articulation Angle | 42.5° | 42.5 ° | 44° | 42.5° |
| Outside Clearance Radius** | - | 296.7 in | - | - |
| Inner Clearance Radius** | - | 127.8 in | - | - |
| Note | - | **Clearance dimensions are for reference only. | - | *Clearance dimensions are for reference only. |
| Outside Clearance Radius* | - | - | - | 261.3 in |
| Inner Clearance Radius* | - | - | - | 129.6 in |
Tires |
||||
| Tire Size | 17.5 × R25 | 35/65 R33 | 26.5R25 | 18 × R25 |
Service Refill Capacities |
||||
| Engine Crankcase - With Filter | 6.6 gal (US) | - | - | 8.98 gal (US) |
| Transmission | 11.9 gal (US) | 16.4 gal (US) | - | 12.4 gal (US) |
| Hydraulic Tank | 23.2 gal (US) | 37 gal (US) | 35.7 gal (US) | 33 gal (US) |
| Cooling System | 17.7 gal (US) | 19.8 gal (US) | 19.8 gal (US) | 16.1 gal (US) |
| Front Differential and Final Drives | 10 gal (US) | 31.4 gal (US) | - | 21.1 gal (US) |
| Rear Differential and Final Drives | 11.1 gal (US) | 33.5 gal (US) | - | 21.1 gal (US) |
| Fuel Tank | 77.9 gal (US) | 406.5 gal (US) | - | 105.7 gal (US) |
| Engine Crankcase | - | 9 gal (US) | 9.8 gal (US) | - |
| Front Differential and Final Drives - With Axle Oil Cooling System | - | 42 gal (US) | - | - |
| Rear Differential and Final Drives - With Axle Oil Cooling System | - | 44.1 gal (US) | - | - |
| Secondary Fuel Tank - If Equipped | - | - | - | 87.2 gal (US) |
Standards |
||||
| Standards | ROPS/FOPS Certified Cab | Rollover Protective Structure (ROPS)/Falling Object Protective Structure (FOPS) Certified Cab | - | ROPS/FOPS Certified Cab |
Service Capacities - Not Refill |
||||
| Fuel System | - | - | 128.4 gal (US) | - |
| DEF Tank | - | - | 7.1 gal (US) | - |
| Front Differential and Final Drive | - | - | 39 gal (US) | - |
| Rear Differential and Final Drive | - | - | 37.2 gal (US) | - |
| Transmission | - | - | 14.2 gal (US) | - |
Add a Similar Product:
-
R2900G Underground Mining Loader Add