Compare Equipment Go Back
 272D3 Skid Steer Loader |
 289D3 Compact Track Loader |
|
|
Engine |
|||
|---|---|---|---|
| Gross Power - SAE J1995 | 98 HP | 74.3 HP | - |
| Net Power - SAE 1349 | 95 HP | 72.9 HP | - |
| Displacement | 232 in³ | 203 in³ | - |
| Stroke | 4.7 in | 4.7 in | - |
| Bore | 3.9 in | 3.7 in | - |
| Peak Torque - 1,500 rpm - SAE J1995 | 246 ft·lbf | 195 ft·lbf | - |
| Engine Model | Cat C3.8 DIT (turbo) | Cat C3.3B DIT (turbo) | - |
| Net Power - ISO 9249 | 96 HP | 73.7 HP | - |
| Net Flywheel Power | 95 HP | - | - |
| Net Power | - | 72.9 HP | - |
| Note | - | Net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler/aftertreatment and cooling fan. | - |
Operating Specifications |
|||
| Rated Operating Capacity | 3450 lb | - | - |
| Tipping Load | 6900 lb | 8255 lb | - |
| Breakout Force - Tilt Cylinder | 7443 lb | 7291 lb | - |
| Breakout Force - Lift Cylinder | 6074 lb | - | - |
| Rated Operating Capacity with Optional Counterweight | 3690 lb | 4370 lb | - |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA batt | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 450 mm (17.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr | - |
| Rated Operating Capacities - 35% Tipping Load | - | 2890 lb | - |
| Rated Operating Capacities - 50% Tipping Load | - | 4130 lb | - |
| Ground Pressure - With 450 mm/17.7 in Track | - | 4.7 psi | - |
| Ground Contact Area - With 450 mm/17.7 in Track | - | 2272 in² | - |
Weights |
|||
| Operating Weight | 9133 lb | 10688 lb | - |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA batt | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 450 mm (17.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr | - |
Dimensions |
|||
| Wheel Base | 54.6 in | - | - |
| Height - Top of Cab | 82.4 in | 83.2 in | - |
| Vehicle Width over Tires | 72 in | - | - |
| Ground Clearance | 8.9 in | 8.9 in | - |
| Departure Angle | 27° | 33° | - |
| Maximum Dump Angle | 51° | 51° | - |
| Roll Back Angle | 28° | - | - |
| Bucket Pin Reach - Maximum Lift | 14.7 in | 14.5 in | - |
| Bucket Pin Height - Maximum Lift | 127.1 in | 125.1 in | - |
| Turning Radius from Center - Machine Rear | 74.7 in | 70.7 in | - |
| Reach - Maximum Lift/Dump | 30.3 in | 30 in | - |
| Bumper Overhang - Behind Rear Axle | 46.2 in | - | - |
| Length - Without Bucket | 127.6 in | 117.9 in | - |
| Maximum Overall Height | 160.1 in | 158.1 in | - |
| Turning Radius from Center - Coupler | 58.3 in | 55.5 in | - |
| Maximum Reach - With Arms Parallel to Ground | 50.5 in | 50 in | - |
| Clearance at Maximum Lift and Dump | 96 in | 94 in | - |
| Length - With Bucket on Ground | 155.7 in | 146.2 in | - |
| Bucket Pin Height - Carry Position | 7.8 in | 7.5 in | - |
| Turning Radius from Center - Bucket (racked) | 89.8 in | - | - |
| Rack Back Angle - Maximum Height | 84° | 84° | - |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA batt | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 450 mm (17.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr | - |
| Length - Track on Ground | - | 64.2 in | - |
| Overall Length - Track | - | 83.8 in | - |
| Turning Radius from Center - Bucket | - | 88.8 in | - |
| Vehicle Width (450 mm/17.7 in tracks) | - | 78 in | - |
Cab |
|||
| ROPS | ISO 3471:2008 | ISO 3471:2008 | - |
| FOPS | ISO 3449:2005 Level I | ISO 3449:2005 Level I | - |
Service Refill Capacities |
|||
| Cooling System | 4.1 gal (US) | 3.7 gal (US) | - |
| Engine Crankcase | 3.5 gal (US) | 3 gal (US) | - |
| Fuel Tank | 31.7 gal (US) | 27.7 gal (US) | - |
| Hydraulic System | 14.5 gal (US) | 13.7 gal (US) | - |
| Hydraulic Tank | 10.3 gal (US) | 10.3 gal (US) | - |
| Diesel Exhaust Fluid (DEF) Tank | 5 gal (US) | - | - |
| Chain Box - Each Side | 2.7 gal (US) | - | - |
Noise Level |
|||
| Outside Cab** | 102 dB(A) | - | - |
| Note (2) | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee | **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe | - |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. | - |
| Inside Cab* | 83 dB(A) | - | - |
| Note (3) | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. | - |
| Outside Cab*** | - | 103 dB(A) | - |
| Inside Cab** | - | 83 dB(A) | - |
Hydraulic System |
|||
| Hydraulic Flow - Standard - Loader Hydraulic Flow | 23 gal/min | 23 psi | - |
| Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) | 76 HP | 76 HP | - |
| Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 44 HP | 44 HP | - |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow | 32 gal/min | 32 gal/min | - |
| Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3335 psi | 3335 psi | - |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure | 4061 psi | 4061 psi | - |
Power Train |
|||
| Travel Speed - Forward or Reverse - One Speed | 6.6 mile/h | 4.5 mile/h | - |
| Travel Speed - Forward or Reverse - Two Speed Option | 9.4 mile/h | - | - |
| Travel Speed - Forward or Reverse - Two Speed | - | 8.3 mile/h | - |
Air Conditioning System (if equipped) |
|||
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. | - |
Add a Similar Product:
-
272D3 XE Skid Steer Loader Add
-
246D3 Skid Steer Loader Add
-
262D3 Skid Steer Loader Add
-
236D3 Skid Steer Loader Add
-
242D3 Skid Steer Loader Add
-
226D3 Skid Steer Loader Add
-
232D3 Skid Steer Loader Add
-
299D3 Compact Track Loader Add
-
299D3 XE Compact Track Loader Add
-
299D3 XE Land Management Compact Track Loader Add