Compare Equipment Go Back
 246D3 Skid Steer Loader |
 272D3 Skid Steer Loader |
|
|
Engine |
|||
|---|---|---|---|
| Gross Power - SAE J1995 | 74.3 HP | 98 HP | - |
| Net Power - SAE 1349 | 72.9 HP | 95 HP | - |
| Displacement | 203 in³ | 232 in³ | - |
| Stroke | 4.7 in | 4.7 in | - |
| Bore | 3.7 in | 3.9 in | - |
| Peak Torque - 1,500 rpm - SAE J1995 | 195 ft·lbf | 246 ft·lbf | - |
| Engine Model | Cat C3.3B DIT (turbo) | Cat C3.8 DIT (turbo) | - |
| Net Power - ISO 9249 | 73.7 HP | 96 HP | - |
| Net Flywheel Power | 72.9 HP | 95 HP | - |
Operating Specifications |
|||
| Rated Operating Capacity | 2200 lb | 3450 lb | - |
| Tipping Load | 4400 lb | 6900 lb | - |
| Breakout Force - Tilt Cylinder | 7355 lb | 7443 lb | - |
| Rated Operating Capacity with Optional Counterweight | 2410 lb | 3690 lb | - |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional cou | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA batt | - |
| Breakout Force - Lift Cylinder | - | 6074 lb | - |
Weights |
|||
| Operating Weight | 7478 lb | 9133 lb | - |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional cou | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA batt | - |
Dimensions |
|||
| Wheel Base | 49.2 in | 54.6 in | - |
| Height - Top of Cab | 83.1 in | 82.4 in | - |
| Vehicle Width over Tires | 66 in | 72 in | - |
| Ground Clearance | 8.9 in | 8.9 in | - |
| Departure Angle | 26° | 27° | - |
| Maximum Dump Angle | 39° | 51° | - |
| Bumper Overhang - Behind Rear Axle | 42.6 in | 46.2 in | - |
| Rack Back Angle - Maximum Height | 96° | 84° | - |
| Length - Without Bucket | 117.8 in | 127.6 in | - |
| Maximum Overall Height | 158.7 in | 160.1 in | - |
| Maximum Reach - With Arms Parallel to Ground | 54.6 in | 50.5 in | - |
| Length - With Bucket on Ground | 146 in | 155.7 in | - |
| Turning Radius from Center - Coupler | 55.2 in | 58.3 in | - |
| Bucket Pin Height - Carry Position | 7.9 in | 7.8 in | - |
| Bucket Pin Height - Maximum Lift | 124.2 in | 127.1 in | - |
| Clearance at Maximum Lift and Dump | 97.1 in | 96 in | - |
| Turning Radius from Center - Bucket | 85.9 in | - | - |
| Turning Radius from Center - Machine Rear | 71.2 in | 74.7 in | - |
| Reach - Maximum Lift/Dump | 23.6 in | 30.3 in | - |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional cou | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA batt | - |
| Roll Back Angle | - | 28° | - |
| Bucket Pin Reach - Maximum Lift | - | 14.7 in | - |
| Turning Radius from Center - Bucket (racked) | - | 89.8 in | - |
Cab |
|||
| ROPS | ISO 3471:2008 | ISO 3471:2008 | - |
| FOPS | ISO 3449:2005 Level I | ISO 3449:2005 Level I | - |
Service Refill Capacities |
|||
| Chain Box - Each Side | 3.3 gal (US) | 2.7 gal (US) | - |
| Cooling System | 3.7 gal (US) | 4.1 gal (US) | - |
| Engine Crankcase | 3 gal (US) | 3.5 gal (US) | - |
| Fuel Tank | 27.7 gal (US) | 31.7 gal (US) | - |
| Hydraulic System | 13.7 gal (US) | 14.5 gal (US) | - |
| Hydraulic Tank | 10.3 gal (US) | 10.3 gal (US) | - |
| Diesel Exhaust Fluid (DEF) Tank | - | 5 gal (US) | - |
Hydraulic System |
|||
| Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3335 psi | 3335 psi | - |
| Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 44 HP | 44 HP | - |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure | 4061 psi | 4061 psi | - |
| Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) | 76 HP | 76 HP | - |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow | 32 gal/min | 32 gal/min | - |
| Hydraulic Flow - Standard - Loader Hydraulic Flow | 23 gal/min | 23 gal/min | - |
Power Train |
|||
| Travel Speed - Forward or Reverse - One Speed | 7.7 mile/h | 6.6 mile/h | - |
| Travel Speed - Forward or Reverse - Two Speed Option | 11 mile/h | 9.4 mile/h | - |
Noise Level |
|||
| Inside Cab* | 81 dB(A) | 83 dB(A) | - |
| Note (3) | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. | - |
| Outside Cab** | 101 dB(A) | 102 dB(A) | - |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. | - |
| Note (2) | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee | - |
Air Conditioning System (if equipped) |
|||
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. | - |
Add a Similar Product:
-
272D3 XE Skid Steer Loader Add
-
262D3 Skid Steer Loader Add
-
242D3 Skid Steer Loader Add
-
232D3 Skid Steer Loader Add
-
236D3 Skid Steer Loader Add
-
299D3 XE Land Management Compact Track Loader Add
-
226D3 Skid Steer Loader Add
-
289D3 Compact Track Loader Add
-
299D3 Compact Track Loader Add
-
299D3 XE Compact Track Loader Add