Compare Equipment Go Back
 246D3 Skid Steer Loader |
 232D3 Skid Steer Loader |
|
|
Engine |
|||
|---|---|---|---|
| Gross Power - SAE J1995 | 74.3 HP | 67.1 HP | - |
| Net Power - SAE 1349 | 72.9 HP | 65.8 HP | - |
| Displacement | 203 in³ | 134.3 in³ | - |
| Stroke | 4.7 in | 3.9 in | - |
| Bore | 3.7 in | 3.3 in | - |
| Peak Torque - 1,500 rpm - SAE J1995 | 195 ft·lbf | 153 ft·lbf | - |
| Engine Model | Cat C3.3B DIT (turbo) | Cat C2.2 CRDI | - |
| Net Power - ISO 9249 | 73.7 HP | 66.5 HP | - |
| Net Flywheel Power | 72.9 HP | 65.8 HP | - |
Operating Specifications |
|||
| Rated Operating Capacity | 2200 lb | 1900 lb | - |
| Tipping Load | 4400 lb | 3800 lb | - |
| Breakout Force - Tilt Cylinder | 7355 lb | 3928 lb | - |
| Rated Operating Capacity with Optional Counterweight | 2410 lb | 2000 lb | - |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional cou | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, | - |
Weights |
|||
| Operating Weight | 7478 lb | 6514 lb | - |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional cou | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, | - |
Dimensions |
|||
| Wheel Base | 49.2 in | 41.5 in | - |
| Height - Top of Cab | 83.1 in | 79.9 in | - |
| Vehicle Width over Tires | 66 in | 58.9 in | - |
| Ground Clearance | 8.9 in | 6.7 in | - |
| Departure Angle | 26° | 27.9° | - |
| Maximum Dump Angle | 39° | 47.4° | - |
| Bumper Overhang - Behind Rear Axle | 42.6 in | 35.2 in | - |
| Rack Back Angle - Maximum Height | 96° | 88.2° | - |
| Length - Without Bucket | 117.8 in | 99.3 in | - |
| Maximum Overall Height | 158.7 in | 150.9 in | - |
| Maximum Reach - With Arms Parallel to Ground | 54.6 in | 49.2 in | - |
| Length - With Bucket on Ground | 146 in | 127.3 in | - |
| Turning Radius from Center - Coupler | 55.2 in | 43.4 in | - |
| Bucket Pin Height - Carry Position | 7.9 in | 8.4 in | - |
| Bucket Pin Height - Maximum Lift | 124.2 in | 118.1 in | - |
| Clearance at Maximum Lift and Dump | 97.1 in | 88.7 in | - |
| Turning Radius from Center - Bucket | 85.9 in | 77.8 in | - |
| Turning Radius from Center - Machine Rear | 71.2 in | 59.6 in | - |
| Reach - Maximum Lift/Dump | 23.6 in | 25.7 in | - |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional cou | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, | - |
| Bucket Pin Reach - Maximum Lift | - | 8.8 in | - |
Cab |
|||
| ROPS | ISO 3471:2008 | ISO 3471:2008 | - |
| FOPS | ISO 3449:2005 Level I | ISO 3449:2005 Level I | - |
Service Refill Capacities |
|||
| Chain Box - Each Side | 3.3 gal (US) | 1.8 gal (US) | - |
| Cooling System | 3.7 gal (US) | 3.2 gal (US) | - |
| Engine Crankcase | 3 gal (US) | 2.6 gal (US) | - |
| Fuel Tank | 27.7 gal (US) | 15.1 gal (US) | - |
| Hydraulic System | 13.7 gal (US) | 11.9 gal (US) | - |
| Hydraulic Tank | 10.3 gal (US) | 9 gal (US) | - |
Hydraulic System |
|||
| Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3335 psi | 3336 psi | - |
| Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 44 HP | 35.5 HP | - |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure | 4061 psi | - | - |
| Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) | 76 HP | - | - |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow | 32 gal/min | - | - |
| Hydraulic Flow - Standard - Loader Hydraulic Flow | 23 gal/min | 18 gal/min | - |
| Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow | - | 26 gal/min | - |
| Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure | - | 3336 psi | - |
| Hydraulic Flow - High Flow - Hydraulic Power (Calculated) | - | 50.9 HP | - |
Power Train |
|||
| Travel Speed - Forward or Reverse - One Speed | 7.7 mile/h | 7.6 mile/h | - |
| Travel Speed - Forward or Reverse - Two Speed Option | 11 mile/h | 11.1 mile/h | - |
Noise Level |
|||
| Inside Cab* | 81 dB(A) | 83 dB(A) | - |
| Note (3) | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. | - |
| Outside Cab** | 101 dB(A) | 101 dB(A) | - |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. | - |
| Note (2) | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee | - |
Air Conditioning System (if equipped) |
|||
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. | - |
Add a Similar Product:
-
272D3 Skid Steer Loader Add
-
272D3 XE Skid Steer Loader Add
-
262D3 Skid Steer Loader Add
-
242D3 Skid Steer Loader Add
-
236D3 Skid Steer Loader Add
-
299D3 XE Land Management Compact Track Loader Add
-
226D3 Skid Steer Loader Add
-
289D3 Compact Track Loader Add
-
299D3 Compact Track Loader Add
-
299D3 XE Compact Track Loader Add