Compare Equipment Go Back
232D3 Skid Steer Loader |
272D3 XE Skid Steer Loader |
|
|
Engine |
|||
---|---|---|---|
Gross Power - SAE J1995 | 67.1 HP | 110 HP | - |
Net Power - SAE 1349 | 65.8 HP | 106 HP | - |
Displacement | 134.3 in³ | 232 in³ | - |
Stroke | 3.9 in | 4.7 in | - |
Bore | 3.3 in | 3.9 in | - |
Peak Torque - 1,500 rpm - SAE J1995 | 153 ft·lbf | 276 ft·lbf | - |
Net Flywheel Power | 65.8 HP | 106 HP | - |
Net Power - ISO 9249 | 66.5 HP | 107 HP | - |
Engine Model | Cat C2.2 CRDI | Cat C3.8 DIT (turbo) | - |
Operating Specifications |
|||
Rated Operating Capacity | 1900 lb | 3700 lb | - |
Tipping Load | 3800 lb | 7400 lb | - |
Breakout Force - Tilt Cylinder | 3928 lb | 7362 lb | - |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA | - |
Rated Operating Capacity with Optional Counterweight | 2000 lb | 3950 lb | - |
Breakout Force - Lift Cylinder | - | 6085 lb | - |
Weights |
|||
Operating Weight | 6514 lb | 9573 lb | - |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA | - |
Dimensions |
|||
Wheel Base | 41.5 in | 54.6 in | - |
Height - Top of Cab | 79.9 in | 84 in | - |
Vehicle Width over Tires | 58.9 in | 76 in | - |
Ground Clearance | 6.7 in | 10.4 ft | - |
Departure Angle | 27.9° | 28° | - |
Maximum Dump Angle | 47.4° | 51° | - |
Length - Without Bucket | 99.3 in | 127 in | - |
Clearance at Maximum Lift and Dump | 88.7 in | 97.4 in | - |
Bucket Pin Reach - Maximum Lift | 8.8 in | 13.5 in | - |
Maximum Overall Height | 150.9 in | 161.5 in | - |
Turning Radius from Center - Machine Rear | 59.6 in | 74.7 in | - |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA | - |
Bucket Pin Height - Carry Position | 8.4 in | 9.3 in | - |
Length - With Bucket on Ground | 127.3 in | 155 in | - |
Bumper Overhang - Behind Rear Axle | 35.2 in | 46.2 in | - |
Turning Radius from Center - Bucket | 77.8 in | - | - |
Maximum Reach - With Arms Parallel to Ground | 49.2 in | 49.1 in | - |
Bucket Pin Height - Maximum Lift | 118.1 in | 128.6 in | - |
Reach - Maximum Lift/Dump | 25.7 in | 29 in | - |
Rack Back Angle - Maximum Height | 88.2° | 84° | - |
Turning Radius from Center - Coupler | 43.4 in | 57.7 in | - |
Turning Radius from Center - Bucket (racked) | - | 90.6 in | - |
Roll Back Angle | - | 28° | - |
Cab |
|||
ROPS | ISO 3471:2008 | ISO 3471:2008 | - |
FOPS | ISO 3449:2005 Level I | ISO 3449:2005 Level I | - |
Service Refill Capacities |
|||
Cooling System | 3.2 gal (US) | 4.1 gal (US) | - |
Engine Crankcase | 2.6 gal (US) | 3.5 gal (US) | - |
Fuel Tank | 15.1 gal (US) | 31.7 gal (US) | - |
Hydraulic System | 11.9 gal (US) | 14.5 gal (US) | - |
Hydraulic Tank | 9 gal (US) | 10.3 gal (US) | - |
Chain Box - Each Side | 1.8 gal (US) | 2.7 gal (US) | - |
Diesel Exhaust Fluid (DEF) Tank | - | 5 gal (US) | - |
Noise Level |
|||
Note (3) | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. | - |
Inside Cab* | 83 dB(A) | - | - |
Outside Cab** | 101 dB(A) | - | - |
Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. | - |
Note (2) | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee | **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe | - |
Outside Cab*** | - | 104 dB(A) | - |
Inside Cab** | - | 83 dB(A) | - |
Air Conditioning System (if equipped) |
|||
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. | - |
Hydraulic System |
|||
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow | 26 gal/min | - | - |
Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 35.5 HP | - | - |
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure | 3336 psi | - | - |
Hydraulic Flow - Standard - Loader Hydraulic Flow | 18 gal/min | - | - |
Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3336 psi | - | - |
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) | 50.9 HP | - | - |
Standard Flow Mode - Loader Hydraulic Pressure | - | 3335 psi | - |
Standard Flow Mode - Hydraulic Power - Calculated | - | 44 HP | - |
Standard Flow Mode - Loader Hydraulic Flow | - | 23 gal/min | - |
Note | - | *When equipped with Cat 400 Series work tools. | - |
Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure | - | 4061 psi | - |
Hydraulic Flow - XE - Maximum Loader Hydraulic Flow* | - | 40 gal/min | - |
Hydraulic Flow - XE - Hydraulic Power (calculated) | - | 94 HP | - |
Power Train |
|||
Travel Speed - Forward or Reverse - One Speed | 7.6 mile/h | 7.2 mile/h | - |
Travel Speed - Forward or Reverse - Two Speed Option | 11.1 mile/h | - | - |
Travel Speed - Forward or Reverse - Two Speed | - | 10.3 mile/h | - |
Add a Similar Product:
- 262D3 Skid Steer Loader Add
- 272D3 Skid Steer Loader Add
- 242D3 Skid Steer Loader Add
- 246D3 Skid Steer Loader Add
- 236D3 Skid Steer Loader Add
- 226D3 Skid Steer Loader Add
- 299D3 XE Compact Track Loader Add
- 299D3 XE Land Management Compact Track Loader Add
- 289D3 Compact Track Loader Add
- 299D3 Compact Track Loader Add