Compare Equipment Go Back
 299D3 XE Land Management Compact Track Loader |
 242D3 Skid Steer Loader |
 289D3 Compact Track Loader |
|
Engine |
|||
|---|---|---|---|
| Gross Power - SAE J1995 | 110 HP | 74.3 HP | 74.3 HP |
| Net Power - SAE 1349 | 106 HP | 73.2 HP | 72.9 HP |
| Displacement | 232 in³ | 203 in³ | 203 in³ |
| Bore | 3.9 in | 3.7 in | 3.7 in |
| Stroke | 4.7 in | 4.7 in | 4.7 in |
| Net Power | 106 HP | - | 72.9 HP |
| Net Power - ISO 9249 | 107 HP | 73.9 HP | 73.7 HP |
| Engine Model | Cat C3.8 DIT (turbo) | Cat C3.3B DIT (turbo) | Cat C3.3B DIT (turbo) |
| Peak Torque - 1,500 rpm - SAE J1995 | 276 ft·lbf | 195 ft·lbf | 195 ft·lbf |
| Net Flywheel Power | - | 73.2 HP | - |
| Note | - | - | Net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler/aftertreatment and cooling fan. |
Operating Specifications |
|||
| Rated Operating Capacities - 35% Tipping Load | 4340 lb | - | 2890 lb |
| Tipping Load | 12400 lb | 4400 lb | 8255 lb |
| Breakout Force - Tilt Cylinder | 7270 lb | 4963 lb | 7291 lb |
| Breakout Force - Lift Cylinder | 6162 lb | - | - |
| Ground Pressure - With 450 mm/17.7 in Track | 5.2 psi | - | 4.7 psi |
| Rated Operating Capacities - 50% Tipping Load | 6200 lb | - | 4130 lb |
| Ground Contact Area - With 450 mm/17.7 in Track | 2443 in² | - | 2272 in² |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with polycarbonate door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1, | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counte | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 450 mm (17.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr |
| Ground Contact Area - With 400 mm/15.7 in Track | 2171 in² | - | - |
| Ground Pressure - With 400 mm/15.7 in Track | 5.9 psi | - | - |
| Rated Operating Capacity | - | 2200 lb | - |
| Rated Operating Capacity with Optional Counterweight | - | 2410 lb | 4370 lb |
Weights |
|||
| Operating Weight | 12764 lb | 7138 lb | 10688 lb |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with polycarbonate door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1, | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counte | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 450 mm (17.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr |
Service Refill Capacities |
|||
| Cooling System | 4.1 gal (US) | 3.7 gal (US) | 3.7 gal (US) |
| Engine Crankcase | 3.5 gal (US) | 3 gal (US) | 3 gal (US) |
| Fuel Tank | 58 gal (US) | 24.8 gal (US) | 27.7 gal (US) |
| Hydraulic System | 14.5 gal (US) | 13.2 gal (US) | 13.7 gal (US) |
| Hydraulic Tank | 10.3 gal (US) | 10.3 gal (US) | 10.3 gal (US) |
| Diesel Exhaust Fluid (DEF) Tank | 5 gal (US) | - | - |
| Chain Box - Each Side | - | 2.3 gal (US) | - |
Dimensions |
|||
| Length - Track on Ground | 69.6 in | - | 64.2 in |
| Overall Length - Track | 89.4 in | - | 83.8 in |
| Height - Top of Cab | 83.6 in | 83.1 in | 83.2 in |
| Ground Clearance | 9.6 in | 8.7 in | 8.9 in |
| Departure Angle | 33° | 27° | 33° |
| Maximum Dump Angle | 54° | 52° | 51° |
| Vehicle Width (450 mm/17.7 in tracks) | 78 in | - | 78 in |
| Turning Radius from Center - Coupler | 58.1 in | 51.8 in | 55.5 in |
| Turning Radius from Center - Machine Rear | 74 in | 64.5 in | 70.7 in |
| Vehicle Width (400 mm/15.7 in tracks) | 76 in | - | - |
| Turning Radius from Center - Bucket (racked) | 91.1 in | - | - |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with polycarbonate door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1, | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counte | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 450 mm (17.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr |
| Length - Without Bucket | 125.5 in | 108.9 in | 117.9 in |
| Bucket Pin Reach - Maximum Lift | 19.4 in | 7.2 in | 14.5 in |
| Clearance at Maximum Lift and Dump | 94.5 in | 90 in | 94 in |
| Rack Back Angle - Maximum Height | 81° | 87° | 84° |
| Maximum Overall Height | 158.7 in | 154.2 in | 158.1 in |
| Reach - Maximum Lift/Dump | 33.6 in | 21.7 in | 30 in |
| Length - With Bucket on Ground | 154.7 in | 137.3 in | 146.2 in |
| Maximum Reach - With Arms Parallel to Ground | 51.9 in | 49.2 in | 50 in |
| Bucket Pin Height - Maximum Lift | 126.3 in | 121.1 in | 125.1 in |
| Bucket Pin Height - Carry Position | 7.1 in | 7.9 in | 7.5 in |
| Roll Back Angle | 25° | - | - |
| Wheel Base | - | 43.5 in | - |
| Vehicle Width over Tires | - | 66 in | - |
| Turning Radius from Center - Bucket | - | 83 in | 88.8 in |
| Bumper Overhang - Behind Rear Axle | - | 40.2 in | - |
Cab |
|||
| ROPS | ISO 3471:2008 | ISO 3471:2008 | ISO 3471:2008 |
| FOPS | ISO 3449:2005 Level I | ISO 3449:2005 Level I | ISO 3449:2005 Level I |
Noise Level |
|||
| Note (2) | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee | **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe | **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe |
| Note (1) | Sealed and pressurized cab is standard in North America and Europe. | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (3) | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
| Inside Cab* | 83 dB(A) | - | - |
| Outside Cab** | 104 dB(A) | - | - |
| Inside Cab** | - | 83 dB(A) | 83 dB(A) |
| Outside Cab*** | - | 101 dB(A) | 103 dB(A) |
Air Conditioning System (if equipped) |
|||
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. |
Hydraulic System |
|||
| Standard Flow Mode - Loader Hydraulic Flow | 23 gal/min | - | - |
| Standard Flow Mode - Loader Hydraulic Pressure | 3335 psi | - | - |
| Standard Flow Mode - Hydraulic Power - Calculated | 44 HP | - | - |
| Hydraulic Flow - XE - Hydraulic Power (calculated) | 94 HP | - | - |
| Hydraulic Flow - XE - Maximum Loader Hydraulic Flow* | 40 gal/min | - | - |
| Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure | 4061 psi | - | - |
| Note | *When equipped with Cat 400 Series work tools. | - | - |
| Hydraulic Flow - Standard - Loader Hydraulic Flow | - | 20 gal/min | 23 psi |
| Hydraulic Flow - High Flow - Hydraulic Power (Calculated) | - | 58 HP | - |
| Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow | - | 30 gal/min | - |
| Hydraulic Flow - Standard - Loader Hydraulic Pressure | - | 3335 psi | 3335 psi |
| Hydraulic Flow - Standard - Hydraulic Power (Calculated) | - | 39 HP | 44 HP |
| Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure | - | 3335 psi | - |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure | - | - | 4061 psi |
| Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) | - | - | 76 HP |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow | - | - | 32 gal/min |
Power Train |
|||
| Travel Speed - Forward or Reverse - Two Speed | 8.3 mile/h | - | 8.3 mile/h |
| Travel Speed - Forward or Reverse - One Speed | 5.5 mile/h | 7.5 mile/h | 4.5 mile/h |
| Travel Speed - Forward or Reverse - Two Speed Option | - | 11.5 mile/h | - |
Add a Similar Product:
