Compare Equipment Go Back
299D3 XE Land Management Compact Track Loader |
299D3 Compact Track Loader |
272D3 XE Skid Steer Loader |
242D3 Skid Steer Loader |
|
Engine |
||||
---|---|---|---|---|
Gross Power - SAE J1995 | 110 HP | 98 HP | 110 HP | 74.3 HP |
Net Power - SAE 1349 | 106 HP | 95 HP | 106 HP | 73.2 HP |
Displacement | 232 in³ | 232 in³ | 232 in³ | 203 in³ |
Bore | 3.9 in | 3.9 in | 3.9 in | 3.7 in |
Stroke | 4.7 in | 4.7 in | 4.7 in | 4.7 in |
Net Power | 106 HP | 95 HP | - | - |
Net Power - ISO 9249 | 107 HP | 95 HP | 107 HP | 73.9 HP |
Engine Model | Cat C3.8 DIT (turbo) | Cat C3.8 DIT (turbo) | Cat C3.8 DIT (turbo) | Cat C3.3B DIT (turbo) |
Peak Torque - 1,500 rpm - SAE J1995 | 276 ft·lbf | 246 ft·lbf | 276 ft·lbf | 195 ft·lbf |
Net Flywheel Power | - | - | 106 HP | 73.2 HP |
Operating Specifications |
||||
Rated Operating Capacities - 35% Tipping Load | 4340 lb | 3480 lb | - | - |
Tipping Load | 12400 lb | 9945 lb | 7400 lb | 4400 lb |
Breakout Force - Tilt Cylinder | 7270 lb | 7270 lb | 7362 lb | 4963 lb |
Breakout Force - Lift Cylinder | 6162 lb | 6162 lb | 6085 lb | - |
Ground Pressure - With 450 mm/17.7 in Track | 5.2 psi | 4.7 psi | - | - |
Rated Operating Capacities - 50% Tipping Load | 6200 lb | 4970 lb | - | - |
Ground Contact Area - With 450 mm/17.7 in Track | 2443 in² | 2463 in² | - | - |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with polycarbonate door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1, | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counte |
Ground Contact Area - With 400 mm/15.7 in Track | 2171 in² | 2184 in² | - | - |
Ground Pressure - With 400 mm/15.7 in Track | 5.9 psi | 5.3 psi | - | - |
Rated Operating Capacity with Optional Counterweight | - | 5240 lb | 3950 lb | 2410 lb |
Rated Operating Capacity | - | - | 3700 lb | 2200 lb |
Weights |
||||
Operating Weight | 12764 lb | 11464 lb | 9573 lb | 7138 lb |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with polycarbonate door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1, | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counte |
Service Refill Capacities |
||||
Cooling System | 4.1 gal (US) | 4.1 gal (US) | 4.1 gal (US) | 3.7 gal (US) |
Engine Crankcase | 3.5 gal (US) | 3.5 gal (US) | 3.5 gal (US) | 3 gal (US) |
Fuel Tank | 58 gal (US) | 31.7 gal (US) | 31.7 gal (US) | 24.8 gal (US) |
Hydraulic System | 14.5 gal (US) | 14.5 gal (US) | 14.5 gal (US) | 13.2 gal (US) |
Hydraulic Tank | 10.3 gal (US) | 10.3 gal (US) | 10.3 gal (US) | 10.3 gal (US) |
Diesel Exhaust Fluid (DEF) Tank | 5 gal (US) | 5 gal (US) | 5 gal (US) | - |
Chain Box - Each Side | - | - | 2.7 gal (US) | 2.3 gal (US) |
Dimensions |
||||
Length - Track on Ground | 69.6 in | 69.6 in | - | - |
Overall Length - Track | 89.4 in | 89.4 in | - | - |
Height - Top of Cab | 83.6 in | 83.6 in | 84 in | 83.1 in |
Ground Clearance | 9.6 in | 9.6 in | 10.4 in | 8.7 in |
Departure Angle | 33° | 33° | 28° | 27° |
Maximum Dump Angle | 54° | 54° | 51° | 52° |
Vehicle Width (450 mm/17.7 in tracks) | 78 in | 78 in | - | - |
Turning Radius from Center - Coupler | 58.1 in | 58.1 in | 57.7 in | 51.8 in |
Turning Radius from Center - Machine Rear | 74 in | 74 in | 74.7 in | 64.5 in |
Vehicle Width (400 mm/15.7 in tracks) | 76 in | 76 in | - | - |
Turning Radius from Center - Bucket (racked) | 91.1 in | 91.1 in | 90.6 in | - |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with polycarbonate door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1, | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counte |
Length - Without Bucket | 125.5 in | 125.5 in | 127 in | 108.9 in |
Bucket Pin Reach - Maximum Lift | 19.4 in | 19.4 in | 13.5 in | 7.2 in |
Clearance at Maximum Lift and Dump | 94.5 in | 94.5 in | 97.4 in | 90 in |
Rack Back Angle - Maximum Height | 81° | 81° | 84° | 87° |
Maximum Overall Height | 158.7 in | 158.7 in | 161.5 in | 154.2 in |
Reach - Maximum Lift/Dump | 33.6 in | 33.6 in | 29 in | 21.7 in |
Length - With Bucket on Ground | 154.7 in | 154.7 in | 155 in | 137.3 in |
Maximum Reach - With Arms Parallel to Ground | 51.9 in | 51.9 in | 49.1 in | 49.2 in |
Bucket Pin Height - Maximum Lift | 126.3 in | 126.3 in | 128.6 in | 121.1 in |
Bucket Pin Height - Carry Position | 7.1 in | 7.1 in | 9.3 in | 7.9 in |
Roll Back Angle | 25° | 25° | 28° | - |
Wheel Base | - | - | 54.6 in | 43.5 in |
Vehicle Width over Tires | - | - | 76 in | 66 in |
Bumper Overhang - Behind Rear Axle | - | - | 46.2 in | 40.2 in |
Turning Radius from Center - Bucket | - | - | - | 83 in |
Cab |
||||
ROPS | ISO 3471:2008 | ISO 3471:2008 | ISO 3471:2008 | ISO 3471:2008 |
FOPS | ISO 3449:2005 Level I | ISO 3449:2005 Level I | ISO 3449:2005 Level I | ISO 3449:2005 Level I |
Noise Level |
||||
Note (2) | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee | **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe | **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe |
Note (1) | Sealed and pressurized cab is standard in North America and Europe. | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
Note (3) | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
Inside Cab* | 83 dB(A) | 83 dB(A) | - | - |
Outside Cab** | 104 dB(A) | 104 dB(A) | - | - |
Outside Cab*** | - | - | 104 dB(A) | 101 dB(A) |
Inside Cab** | - | - | 83 dB(A) | 83 dB(A) |
Air Conditioning System (if equipped) |
||||
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
Hydraulic System |
||||
Standard Flow Mode - Loader Hydraulic Flow | 23 gal/min | - | 23 gal/min | - |
Standard Flow Mode - Loader Hydraulic Pressure | 3335 psi | - | 3335 psi | - |
Standard Flow Mode - Hydraulic Power - Calculated | 44 HP | - | 44 HP | - |
Hydraulic Flow - XE - Hydraulic Power (calculated) | 94 HP | - | 94 HP | - |
Hydraulic Flow - XE - Maximum Loader Hydraulic Flow* | 40 gal/min | - | 40 gal/min | - |
Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure | 4061 psi | - | 4061 psi | - |
Note | *When equipped with Cat 400 Series work tools. | - | *When equipped with Cat 400 Series work tools. | - |
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure | - | 4061 psi | - | - |
Hydraulic Flow - Standard - Loader Hydraulic Pressure | - | 3335 psi | - | 3335 psi |
Hydraulic Flow - Standard - Hydraulic Power (Calculated) | - | 44 HP | - | 39 HP |
Hydraulic Flow - Standard - Loader Hydraulic Flow | - | 23 gal/min | - | 20 gal/min |
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow | - | 32 gal/min | - | - |
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) | - | 76 HP | - | - |
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) | - | - | - | 58 HP |
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow | - | - | - | 30 gal/min |
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure | - | - | - | 3335 psi |
Power Train |
||||
Travel Speed - Forward or Reverse - Two Speed | 8.3 mile/h | 8.4 mile/h | 10.3 mile/h | - |
Travel Speed - Forward or Reverse - One Speed | 5.5 mile/h | 5.2 mile/h | 7.2 mile/h | 7.5 mile/h |
Travel Speed - Forward or Reverse - Two Speed Option | - | - | - | 11.5 mile/h |
Add a Similar Product: