Compare Equipment Go Back
289D3 Compact Track Loader |
226D3 Skid Steer Loader |
|
|
Engine |
|||
---|---|---|---|
Gross Power - SAE J1995 | 74.3 HP | 67.1 HP | - |
Net Power - SAE 1349 | 72.9 HP | 65.8 HP | - |
Displacement | 203 in³ | 134.3 in³ | - |
Bore | 3.7 in | 3.3 in | - |
Stroke | 4.7 in | 3.9 in | - |
Net Power | 72.9 HP | - | - |
Engine Model | Cat C3.3B DIT (turbo) | Cat C2.2 CRDI | - |
Peak Torque - 1,500 rpm - SAE J1995 | 195 ft·lbf | 153 ft·lbf | - |
Net Power - ISO 9249 | 73.7 HP | 66.5 HP | - |
Note | Net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler/aftertreatment and cooling fan. | - | - |
Operating Specifications |
|||
Rated Operating Capacities - 35% Tipping Load | 2890 lb | - | - |
Tipping Load | 8255 lb | 3100 lb | - |
Breakout Force - Tilt Cylinder | 7291 lb | 3927 lb | - |
Rated Operating Capacity with Optional Counterweight | 4370 lb | 1650 lb | - |
Rated Operating Capacities - 50% Tipping Load | 4130 lb | - | - |
Ground Pressure - With 450 mm/17.7 in Track | 4.7 psi | - | - |
Ground Contact Area - With 450 mm/17.7 in Track | 2272 in² | - | - |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 450 mm (17.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr | * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery | - |
Rated Operating Capacity | - | 1550 lb | - |
Weights |
|||
Operating Weight | 10688 lb | 5849 lb | - |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 450 mm (17.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr | * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery | - |
Service Refill Capacities |
|||
Cooling System | 3.7 gal (US) | 3.2 gal (US) | - |
Engine Crankcase | 3 gal (US) | 2.6 gal (US) | - |
Fuel Tank | 27.7 gal (US) | 15.1 gal (US) | - |
Hydraulic System | 13.7 gal (US) | 11.9 gal (US) | - |
Hydraulic Tank | 10.3 gal (US) | 9 gal (US) | - |
Chain Box - Each Side | - | 1.8 gal (US) | - |
Dimensions |
|||
Length - Track on Ground | 64.2 in | - | - |
Overall Length - Track | 83.8 in | - | - |
Height - Top of Cab | 83.2 in | 79.8 in | - |
Ground Clearance | 8.9 in | 6.9 in | - |
Departure Angle | 33° | 27.9° | - |
Maximum Dump Angle | 51° | 46.7° | - |
Clearance at Maximum Lift and Dump | 94 in | 81.8 in | - |
Turning Radius from Center - Machine Rear | 70.7 in | 59.6 in | - |
Length - Without Bucket | 117.9 in | 99.4 in | - |
Maximum Reach - With Arms Parallel to Ground | 50 in | 50.7 in | - |
Turning Radius from Center - Bucket | 88.8 in | 77.8 in | - |
Bucket Pin Height - Carry Position | 7.5 in | 8.5 in | - |
Turning Radius from Center - Coupler | 55.5 in | 43.5 in | - |
Bucket Pin Height - Maximum Lift | 125.1 in | 110.9 in | - |
Reach - Maximum Lift/Dump | 30 in | 21 in | - |
Length - With Bucket on Ground | 146.2 in | 127.3 in | - |
Maximum Overall Height | 158.1 in | 143.8 in | - |
Rack Back Angle - Maximum Height | 84° | 88.9° | - |
Bucket Pin Reach - Maximum Lift | 14.5 in | - | - |
Vehicle Width (450 mm/17.7 in tracks) | 78 in | - | - |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 450 mm (17.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr | * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery | - |
Wheel Base | - | 41.5 in | - |
Vehicle Width over Tires | - | 58.9 in | - |
Bumper Overhang - Behind Rear Axle | - | 35.2 in | - |
Cab |
|||
ROPS | ISO 3471:2008 | ISO 3471:2008 | - |
FOPS | ISO 3449:2005 Level I | ISO 3449:2005 Level I | - |
Hydraulic System |
|||
Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 44 HP | 33.5 HP | - |
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure | 4061 psi | - | - |
Hydraulic Flow - Standard - Loader Hydraulic Flow | 23 psi | 18 gal/min | - |
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) | 76 HP | - | - |
Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3335 psi | 3336 psi | - |
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow | 32 gal/min | - | - |
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure | - | 3336 psi | - |
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) | - | 50.9 HP | - |
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow | - | 26 gal/min | - |
Power Train |
|||
Travel Speed - Forward or Reverse - Two Speed | 8.3 mile/h | - | - |
Travel Speed - Forward or Reverse - One Speed | 4.5 mile/h | 7.6 mile/h | - |
Travel Speed - Forward or Reverse - Two Speed Option | - | 11.1 mile/h | - |
Air Conditioning System (if equipped) |
|||
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. | - |
Noise Level |
|||
Note (2) | **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe | **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe | - |
Outside Cab*** | 103 dB(A) | 102 dB(A) | - |
Inside Cab** | 83 dB(A) | 83 dB(A) | - |
Note (3) | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. | - |
Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. | - |
Add a Similar Product:
- 272D3 XE Skid Steer Loader Add
- 272D3 Skid Steer Loader Add
- 246D3 Skid Steer Loader Add
- 262D3 Skid Steer Loader Add
- 232D3 Skid Steer Loader Add
- 236D3 Skid Steer Loader Add
- 242D3 Skid Steer Loader Add
- 299D3 XE Land Management Compact Track Loader Add
- 299D3 Compact Track Loader Add
- 299D3 XE Compact Track Loader Add