Compare Equipment Go Back
 279D3 Compact Track Loader |
 299D3 XE Land Management Compact Track Loader |
 272D3 Skid Steer Loader |
|
Engine |
|||
|---|---|---|---|
| Gross Power - SAE J1995 | 74.3 HP | 110 HP | 98 HP |
| Net Power - SAE 1349 | 72.9 HP | 106 HP | 95 HP |
| Displacement | 203 in³ | 232 in³ | 232 in³ |
| Bore | 3.7 in | 3.9 in | 3.9 in |
| Stroke | 4.7 in | 4.7 in | 4.7 in |
| Peak Torque - 1,500 rpm - SAE J1995 | 195 ft·lbf | 276 ft·lbf | 246 ft·lbf |
| Net Power | 72.9 HP | 106 HP | - |
| Gross Power | 74.3 HP | - | - |
| Engine Model | Cat C3.3B DIT (turbo) | Cat C3.8 DIT (turbo) | Cat C3.8 DIT (turbo) |
| Net Power - ISO 9249 | 73.7 HP | 107 HP | 96 HP |
| Note | Net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler/aftertreatment and cooling fan. | - | - |
| Net Flywheel Power | - | - | 95 HP |
Operating Specifications |
|||
| Rated Operating Capacities - 35% Tipping Load | 2220 lb | 4340 lb | - |
| Tipping Load | 6345 lb | 12400 lb | 6900 lb |
| Breakout Force - Tilt Cylinder | 7285 lb | 7270 lb | 7443 lb |
| Rated Operating Capacities - 50% Tipping Load | 3170 lb | 6200 lb | - |
| Ground Contact Area - With 450 mm/17.7 in Track | 2272 in² | 2443 in² | - |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 450 mm (17.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with polycarbonate door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1, | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA batt |
| Rated Operating Capacity with Optional Counterweight | 3390 lb | - | 3690 lb |
| Ground Pressure - With 450 mm/17.7 in Track | 4.4 psi | 5.2 psi | - |
| Breakout Force - Lift Cylinder | - | 6162 lb | 6074 lb |
| Ground Contact Area - With 400 mm/15.7 in Track | - | 2171 in² | - |
| Ground Pressure - With 400 mm/15.7 in Track | - | 5.9 psi | - |
| Rated Operating Capacity | - | - | 3450 lb |
Weights |
|||
| Operating Weight | 10095 lb | 12764 lb | 9133 lb |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 450 mm (17.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with polycarbonate door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1, | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA batt |
Dimensions |
|||
| Length - Track on Ground | 64.2 in | 69.6 in | - |
| Overall Length - Track | 83.8 in | 89.4 in | - |
| Height - Top of Cab | 83.2 in | 83.6 in | 82.4 in |
| Ground Clearance | 8.9 in | 9.6 in | 8.9 in |
| Departure Angle | 32° | 33° | 27° |
| Maximum Dump Angle | 39° | 54° | 51° |
| Bucket Pin Height - Carry Position | 7.8 in | 7.1 in | 7.8 in |
| Turning Radius from Center - Machine Rear | 70.7 in | 74 in | 74.7 in |
| Turning Radius from Center - Coupler | 55.5 in | 58.1 in | 58.3 in |
| Maximum Overall Height | 159.5 in | 158.7 in | 160.1 in |
| Maximum Reach - With Arms Parallel to Ground | 54 in | 51.9 in | 50.5 in |
| Turning Radius from Center - Bucket | 88.8 in | - | - |
| Bucket Pin Height - Maximum Lift | 124.9 in | 126.3 in | 127.1 in |
| Length - With Bucket on Ground | 146.2 in | 154.7 in | 155.7 in |
| Length - Without Bucket | 117.9 in | 125.5 in | 127.6 in |
| Reach - Maximum Lift/Dump | 22.6 in | 33.6 in | 30.3 in |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 450 mm (17.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with polycarbonate door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1, | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA batt |
| Clearance at Maximum Lift and Dump | 97.8 in | 94.5 in | 96 in |
| Vehicle Width (450 mm/17.7 in tracks) | 78 in | 78 in | - |
| Rack Back Angle - Maximum Height | 84° | 81° | 84° |
| Vehicle Width (400 mm/15.7 in tracks) | - | 76 in | - |
| Turning Radius from Center - Bucket (racked) | - | 91.1 in | 89.8 in |
| Bucket Pin Reach - Maximum Lift | - | 19.4 in | 14.7 in |
| Roll Back Angle | - | 25° | 28° |
| Wheel Base | - | - | 54.6 in |
| Vehicle Width over Tires | - | - | 72 in |
| Bumper Overhang - Behind Rear Axle | - | - | 46.2 in |
Cab |
|||
| ROPS | ISO 3471:2008 | ISO 3471:2008 | ISO 3471:2008 |
| FOPS | ISO 3449:2005 Level I | ISO 3449:2005 Level I | ISO 3449:2005 Level I |
Hydraulic System |
|||
| Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3335 psi | - | 3335 psi |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow | 32 gal/min | - | 32 gal/min |
| Hydraulic Flow - Standard - Loader Hydraulic Flow | 23 psi | - | 23 gal/min |
| Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 44 HP | - | 44 HP |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure | 4061 HP | - | 4061 psi |
| Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) | 76 HP | - | 76 HP |
| Standard Flow Mode - Loader Hydraulic Flow | - | 23 gal/min | - |
| Standard Flow Mode - Loader Hydraulic Pressure | - | 3335 psi | - |
| Standard Flow Mode - Hydraulic Power - Calculated | - | 44 HP | - |
| Hydraulic Flow - XE - Hydraulic Power (calculated) | - | 94 HP | - |
| Hydraulic Flow - XE - Maximum Loader Hydraulic Flow* | - | 40 gal/min | - |
| Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure | - | 4061 psi | - |
| Note | - | *When equipped with Cat 400 Series work tools. | - |
Power Train |
|||
| Travel Speed - Forward or Reverse - Two Speed | 8.3 mile/h | 8.3 mile/h | - |
| Travel Speed - Forward or Reverse - One Speed | 4.5 mile/h | 5.5 mile/h | 6.6 mile/h |
| Travel Speed - Forward or Reverse - Two Speed Option | - | - | 9.4 mile/h |
Service Refill Capacities |
|||
| Hydraulic System | 13.7 gal (US) | 14.5 gal (US) | 14.5 gal (US) |
| Hydraulic Tank | 10.3 gal (US) | 10.3 gal (US) | 10.3 gal (US) |
| Fuel Tank | 27.7 gal (US) | 58 gal (US) | 31.7 gal (US) |
| Engine Crankcase | 3 gal (US) | 3.5 gal (US) | 3.5 gal (US) |
| Cooling System | 3.7 gal (US) | 4.1 gal (US) | 4.1 gal (US) |
| Diesel Exhaust Fluid (DEF) Tank | - | 5 gal (US) | 5 gal (US) |
| Chain Box - Each Side | - | - | 2.7 gal (US) |
Air Conditioning System (if equipped) |
|||
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
Noise Level |
|||
| Note (2) | **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee |
| Outside Cab*** | 103 dB(A) | - | - |
| Note (3) | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
| Inside Cab** | 83 dB(A) | - | - |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. | Sealed and pressurized cab is standard in North America and Europe. | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Inside Cab* | - | 83 dB(A) | 83 dB(A) |
| Outside Cab** | - | 104 dB(A) | 102 dB(A) |
Add a Similar Product:
