Compare Equipment Go Back
 259D3 Compact Track Loader |
 272D3 Skid Steer Loader |
|
|
Engine |
|||
|---|---|---|---|
| Gross Power - SAE J1995 | 74.3 HP | 98 HP | - |
| Net Power | 73.2 HP | - | - |
| Gross Power | 74.3 HP | - | - |
| Net Power - ISO 9249 | 73.9 HP | 96 HP | - |
| Displacement | 203 in³ | 232 in³ | - |
| Bore | 3.7 in | 3.9 in | - |
| Engine Model | Cat C3.3B DIT (turbo) | Cat C3.8 DIT (turbo) | - |
| Net Power - SAE 1349 | 73.2 HP | 95 HP | - |
| Stroke | 4.7 in | 4.7 in | - |
| Peak Torque - 1,500 rpm - SAE J1995 | 195 ft·lbf | 246 ft·lbf | - |
| Net Flywheel Power | - | 95 HP | - |
Operating Specifications |
|||
| Rated Operating Capacities - 35% Tipping Load | 2010 lb | - | - |
| Tipping Load | 5745 lb | 6900 lb | - |
| Breakout Force - Tilt Cylinder | 4965 lb | 7443 lb | - |
| Ground Contact Area - With 320 mm/12.6 in Track | 1483 in² | - | - |
| Ground Pressure - With 320 mm/12.6 in Track | 6.1 psi | - | - |
| Rated Operating Capacities - 50% Tipping Load | 2870 lb | - | - |
| Ground Contact Area - With 400 mm/15.7 in Track | 1848 in² | - | - |
| Rated Operating Capacity with Optional Counterweight | 3060 lb | 3690 lb | - |
| Ground Pressure - With 400 mm/15.7 in Track | 4.9 psi | - | - |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA batt | - |
| Rated Operating Capacity | - | 3450 lb | - |
| Breakout Force - Lift Cylinder | - | 6074 lb | - |
Weights |
|||
| Operating Weight | 8987 lb | 9133 lb | - |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA batt | - |
Dimensions |
|||
| Length - Track on Ground | 59 in | - | - |
| Overall Length - Track | 78.7 in | - | - |
| Height - Top of Cab | 83.1 in | 82.4 in | - |
| Ground Clearance | 8.9 in | 8.9 in | - |
| Departure Angle | 35° | 27° | - |
| Maximum Dump Angle | 52° | 51° | - |
| Bucket Pin Height - Carry Position | 7.8 in | 7.8 in | - |
| Vehicle Width (400 mm/15.7 in tracks) | 69 in | - | - |
| Turning Radius from Center - Coupler | 54.8 in | 58.3 in | - |
| Bucket Pin Reach - Maximum Lift | 9.4 in | 14.7 in | - |
| Vehicle Width (320 mm/12.6 in tracks) | 66 in | - | - |
| Maximum Reach - With Arms Parallel to Ground | 51.4 in | 50.5 in | - |
| Maximum Overall Height | 154.1 in | 160.1 in | - |
| Turning Radius from Center - Bucket | 86 in | - | - |
| Bucket Pin Height - Maximum Lift | 121 in | 127.1 in | - |
| Length - Without Bucket | 108.9 in | 127.6 in | - |
| Rack Back Angle - Maximum Height | 87° | 84° | - |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA batt | - |
| Turning Radius from Center - Machine Rear | 61.5 in | 74.7 in | - |
| Length - With Bucket on Ground | 137.3 in | 155.7 in | - |
| Clearance at Maximum Lift and Dump | 89.9 in | 96 in | - |
| Reach - Maximum Lift/Dump | 23.9 in | 30.3 in | - |
| Wheel Base | - | 54.6 in | - |
| Vehicle Width over Tires | - | 72 in | - |
| Roll Back Angle | - | 28° | - |
| Bumper Overhang - Behind Rear Axle | - | 46.2 in | - |
| Turning Radius from Center - Bucket (racked) | - | 89.8 in | - |
Cab |
|||
| ROPS | ISO 3471:2008 | ISO 3471:2008 | - |
| FOPS | ISO 3449:2005 Level I | ISO 3449:2005 Level I | - |
Service Refill Capacities |
|||
| Hydraulic System | 13.2 gal (US) | 14.5 gal (US) | - |
| Fuel Tank | 24.8 gal (US) | 31.7 gal (US) | - |
| Engine Crankcase | 3 gal (US) | 3.5 gal (US) | - |
| Hydraulic Tank | 10.3 gal (US) | 10.3 gal (US) | - |
| Cooling System | 3.7 gal (US) | 4.1 gal (US) | - |
| Diesel Exhaust Fluid (DEF) Tank | - | 5 gal (US) | - |
| Chain Box - Each Side | - | 2.7 gal (US) | - |
Hydraulic System |
|||
| Hydraulic Flow - High Flow - Loader Hydraulic Pressure | 3335 psi | - | - |
| Hydraulic Flow - High Flow - Hydraulic Power (Calculated) | 58 HP | - | - |
| Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3335 psi | 3335 psi | - |
| Hydraulic Flow - Standard - Loader Hydraulic Flow | 20 gal/min | 23 gal/min | - |
| Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 39 HP | 44 HP | - |
| Hydraulic Flow - High Flow - Loader Hydraulic Flow | 30 gal/min | - | - |
| Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) | - | 76 HP | - |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow | - | 32 gal/min | - |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure | - | 4061 psi | - |
Power Train |
|||
| Travel Speed - Forward or Reverse - One Speed | 5.9 mile/h | 6.6 mile/h | - |
| Travel Speed - Forward or Reverse - Two Speed | 8.5 mile/h | - | - |
| Travel Speed - Forward or Reverse - Two Speed Option | - | 9.4 mile/h | - |
Air Conditioning System (if equipped) |
|||
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. | - |
Noise Level |
|||
| Note (3) | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. | - |
| Outside Cab*** | 103 dB(A) | - | - |
| Inside Cab** | 83 dB(A) | - | - |
| Note (2) | **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee | - |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. | - |
| Outside Cab** | - | 102 dB(A) | - |
| Inside Cab* | - | 83 dB(A) | - |
Add a Similar Product:
-
272D3 XE Skid Steer Loader Add
-
262D3 Skid Steer Loader Add
-
242D3 Skid Steer Loader Add
-
246D3 Skid Steer Loader Add
-
232D3 Skid Steer Loader Add
-
236D3 Skid Steer Loader Add
-
299D3 XE Land Management Compact Track Loader Add
-
226D3 Skid Steer Loader Add
-
299D3 XE Compact Track Loader Add
-
299D3 Compact Track Loader Add