CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D6 XE Dozer
    View Product
    D11 Dozer
    View Product Remove
    844 Wheel Dozer
    View Product Remove

    Engine
    Engine Model Cat C9.3B - C27 Cat®
    Power - Net 215 HP - -
    Net Power - Rated - ISO 9249/SAE J1349 215 HP - -
    Net Power (Rated) - ISO 9249 (DIN) 219 mhp - -
    Emissions U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V - U.S. EPA Tier 4 Final and EU Stage V or China Nonroad Stage III Emissions standards, equivalent to U.S. EPA Tier 2
    Note (1) Rated horsepower at 1,700 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect a - -
    Note (2) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( - -
    Note (3) Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. - -
    Note (4) Machine Build Number 20B - -
    Rated Speed - - 1800 r/min
    Gross Power - ISO 14396 - - 752 HP
    Gross Power - SAE J1995 - - 766 HP
    Net Power - SAE J1349 - Standard Ambient - - 699 HP
    Net Power - SAE J1349 - High Ambient - - 648 HP
    Bore - - 5.4 in
    Stroke - - 6 in
    Displacement - - 1649.5 in³
    Peak Torque - Speed - - 2624 lb/ft
    Torque Rise - - 18 %

    Weights
    Operating Weight 51333 lb 229800 lb -
    Operating Weight - Carrydozer - 250665 lb -
    Note (1) - D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator. -
    Note (2) - D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator. -

    Transmission
    Power Train Electric Drive - -
    1.0 Forward - 2.5 mile/h -
    2.0 Forward - 4.4 mile/h -
    3.0 Forward - 7.6 mile/h -
    1.0 Reverse - 3 mile/h -
    2.0 Reverse - 5.3 mile/h -
    3.0 Reverse - 9.1 mile/h -
    Drawbar Pull - 3 Forward - 46250 ft·lbf -
    Drawbar Pull - 1 Forward - 148200 ft·lbf -
    Drawbar Pull - 2 Forward - 82300 ft·lbf -
    Transmission Type - - Cat Planetary Power Shift
    Converter Drive - Forward 1 - - 4.5 mile/h
    Converter Drive - Forward 2 - - 8.3 mile/h
    Converter Drive - Forward 3 - - 14.2 mile/h
    Converter Drive - Reverse 1 - - 4.9 mile/h
    Converter Drive - Reverse 2 - - 9.1 mile/h
    Converter Drive - Reverse 3 - - 15.5 mile/h
    Direct Drive - Forward 1 - - Lock-up disabled
    Direct Drive - Forward 2 - - 8.5 mile/h
    Direct Drive - Forward 3 - - 15.2 mile/h
    Direct Drive - Reverse 1 - - 5.4 mile/h
    Direct Drive - Reverse 2 - - 9.6 mile/h
    Direct Drive - Reverse 3 - - 16.4 mile/h

    Service Refill Capacities
    Fuel Tank 90 gal (US) - -
    DEF Tank 7.4 gal (US) - -
    Cooling System - 46.8 gal (US) 54.9 gal (US)
    Cooling System Refill - Tier 2 Equivalent Engine - 41.7 gal (US) -
    Engine Crankcase - 35.1 gal (US) -
    Power Train - 120 gal (US) -
    Power Train - Refill Volume - 103.3 gal (US) -
    Final Drive - Each - 12.4 gal (US) -
    Roller Frames - Each - 24.8 gal (US) -
    Hydraulic Tank - 42.2 gal (US) -
    Hydraulic System Tank and Chassis - 64.7 gal (US) -
    Hydraulic System Chassis + Blade and Ripper (Standard) - 117.6 gal (US) -
    Hydraulic System Chassis + Blade and Ripper (Carrydozer) - 143.4 gal (US) -
    Fuel Tank - Standard - - 286.6 gal (US)
    Crankcase - - 20 gal (US)
    Transmission - - 29.1 gal (US)
    Differential - Final Drives - Front - - 71.6 gal (US)
    Differential - Final Drives - Rear - - 68.9 gal (US)
    Hydraulic System - Implement and Hydraulic Fan - - 68.9 gal (US)
    Hydraulic System - Steering and Braking - - 34.9 gal (US)

    D6 XE Push Arm
    Operating Weight 49388 lb - -
    Ground Pressure 8 psi - -
    Width of Standard Shoe 24 in - -
    Blade Semi-Universal (SU) - -
    Blade Capacity 7.5 yd³ - -

    D6 XE LGP (30-in) Push Arm
    Operating Weight 51020 lb - -
    Ground Pressure 6.6 psi - -
    Width of Standard Shoe 30 in - -
    Blade Semi-Universal (SU) - -
    Blade Capacity 7.6 yd³ - -

    D6 XE LGP (36-in) Push Arm
    Operating Weight 53315 lb - -
    Ground Pressure 5.3 psi - -
    Width of Standard Shoe 36 in - -
    Blade Straight - -
    Blade Capacity 5 yd³ - -

    D6 XE VPAT
    Operating Weight 49708 lb - -
    Ground Pressure 7.2 psi - -
    Width of Standard Shoe 24 in - -
    Blade VPAT - -
    Blade Capacity 5.4 yd³ - -

    D6 XE LGP (30-in) VPAT
    Operating Weight 51333 lb - -
    Ground Pressure 5.9 psi - -
    Width of Standard Shoe 30 in - -
    Blade VPAT - -
    Blade Capacity 5.9 yd³ - -

    D6 XE LGP (36-in) VPAT
    Operating Weight 52512 lb - -
    Ground Pressure 5.1 psi - -
    Width of Standard Shoe 36 in - -
    Blade VPAT - -
    Blade Capacity 6.5 yd³ - -

    Sustainability
    Recyclability 98% - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
    Note (1) - The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons) -

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model - Cat® C32 -
    Engine Power - Net SAE J1349/ISO 9249 - Forward - 850 HP -
    Displacement - 1959 in³ -
    Engine Power - Net SAE J1349/ISO 9249 - Reverse - 955 HP -
    Note (1) - *Excludes all fan losses. -
    Note (2) - Engine ratings apply at 1,800 rpm. -
    Note (3) - Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. -

    Blades
    Semi-Universal (SU)* Capacity - 35.6 yd³ -
    Semi-Universal (SU)* Width Over Endbits - 219.8 in -
    U-Blade Capacity - 45 yd³ -
    U-Blade Width - 249.6 in -
    Reclamation Universal - Blade capacity (SAE J1265) - 55 yd³ -
    Reclamation Universal - Width with blade (over end bits) - 251.8 in -
    Carry Dozer - Blade capacity (SAE J1265) - 57 yd³ -
    Carry Dozer - Width with blade (over end bits) - 263.9 in -

    Engine - U.S. EPA Tier 2 Equivalent
    Engine Model - Cat® C32 -
    Displacement - 1959 in³ -
    Engine Power - Net SAE J1349/ISO 9249 - Forward - 850 HP -
    Engine Power - Net SAE J1349/ISO 9249 - Reverse - 957 HP -
    Note (1) - *Excludes all fan losses. -
    Note (2) - Engine ratings apply at 1,800 rpm. -
    Note (3) - Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. -

    Fuel Tank Capacities
    Fuel Tank - Total Volume - 500 gal (US) -
    Fuel Tank - Usable Volume - 475 gal (US) -

    Hydraulic Controls
    Pump Type - Variable displacement piston pump -
    Combined Pump Output - Implement - 177 gal/min -

    Undercarriage
    Shoe Type - Extreme Service -
    Width - Shoe - 28 in -
    Width - Shoe - CD - 36 in -
    Shoes/Side - 41 -
    Grouser Height - 4 in -
    Pitch - 12.5 in -
    Ground Clearance* - 30.6 in -
    Track Gauge - 114 in -
    Length - Track on Ground - 175 in -
    Ground Contact Area - 9781 in² -
    Ground Contact Area - CD - 12605 in² -
    Track Rollers/Side - 8 -
    Number of Carrier Rollers - 1 per side (optional) -

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) - 66000 lb -
    Maximum penetration depth (standard tip) - 63.5 in -
    Pryout Force - 148510 lb -

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) - 66110 lb -
    Maximum penetration depth (standard tip) - 85.5 in -
    Pryout Force - 148510 lb -

    Ripper - Multi-Shank, Adjustable Parallelogram
    Overall Beam Width - 131.1 in -
    Maximum Penetration Force - Shank Vertical - 77350 lb -
    Maximum Penetration - Standard Tip - 43.3 in -
    Pry-Out Force - Multi-Shank Ripper with One Tooth - 145640 lb -

    Dimensions - D11 Carrydozer
    Width at Outside of Track (710 mm Track Shoe) - 149.8 in -
    Length with SU-Blade** - No rear attachment - 345.1 in -
    Overall Length SU-Blade and SS Ripper** - 421.7 in -

    Standards
    ROPS - Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008 -
    FOPS - Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II -
    Sound (1) - The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed). -
    Sound (2) - The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed). -

    Dimensions - D11
    Ground Clearance* - 31.4 in -
    Track Gauge - 114 in -
    Width at Outside of Track (710 mm Track Shoe) - 142 in -
    Height (ROPS/canopy)* - 185.9 in -
    Length of Track on Ground - 175 in -
    Length with SU-Blade** - No rear attachment - 337.8 in -
    Overall Length SU-Blade and SS Ripper** - 414.4 in -
    Note - *Includes grouser height for total dimensions on hard surfaces. -

    Operating Specifications
    Operating Weight - - 165089 lb
    Blade Capacities - - 15.9 - 30.7 m3 (20.7 - 40.2 yd3)

    Hydraulic System - Lift/Tilt
    Output at 2,000 rpm and 6900 kPa (1,000 psi) - - 82 gal/min
    Cylinders, Double Acting - Lift, Bore and Stroke - - 133 mm × 1535 mm (5.25 in × 60.4 in)
    Cylinder, Double Acting - Tilt and Tip, Bore and Stroke - - 210 mm × 188 mm (8.25 in × 7.4 in)
    Relief Valve Setting - Bulldozer (Large Pump) - - 2700 psi
    Relief Valve Setting - Tilt Cylinders (Small Pump) - - 2920 psi

    Hydraulic System - Steering
    Steering System - Circuit - - Pilot, load sensing
    Steering System - Pump - - Piston, variable displacement
    Minimum Turning Radius - Over Blade - - 34 ft
    Total Steering Angle - - 35 °
    Maximum Flow - - 94.3 gal/min
    Relief Valve Setting - - 4500 psi

    Axles
    Front - - Fixed
    Rear - - Trunnion
    Oscillation Angle - - 8.5 °

    Brakes
    Brakes - - Meets ISO 3540:2011

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - - 69 dB(A)
    Machine Sound Level (ISO 6395:2008) - - 115 dB(A)

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - - 69 dB(A)
    Machine Sound Level (ISO 6395:2008) - - 113 dB(A)

    Cab
    ROPS/FOPS - - ISO 3471:2008 and ISO 3449:2005 Level II Standards

    Dimensions (Approximate)
    Height - Top of ROPS - - 17.2 ft
    Height - Top of Exhaust Pipe - - 16.6 ft
    Height - Top of Hood - - 12.7 ft
    Ground Clearance - - 2 ft
    Centerline of Front Axle to Hitch - - 7.5 ft
    Centerline of Rear Axle to Edge of Bumper - - 12.5 ft
    Wheel Base - - 15.1 ft
    Length - With Blade on Ground - - 36.5 ft
    Add a Similar Product: