Compare Equipment Go Back
 PM310 Wheel Undercarriage Cold Planer |
 PM822 Cold Planer |
|
|
Cutting System |
|||
|---|---|---|---|
| Milling Width | 39.4 in | 88 in | - |
| Maximum Milling Depth | 13 in | 13 in | - |
| Rotor Speeds | 97 / 109 / 121 rpm | 100 / 109 / 118 rpm | - |
| Number of Bits | 91 | 193 | - |
Power Train |
|||
| Rated Power | 336.6 HP | 806 HP | - |
| Engine | C9.3 | Cat C18 twin-turbo | - |
| Maximum Travel Speed | 4.7 mile/h | 3.7 mile/h | - |
| Maximum Milling Speed | 108 ft/min | 328 ft/min | - |
Weights |
|||
| Operating Weight | 46473 lb | 80910 lb | - |
| Transport Weight | 42920 lb | 72312 lb | - |
Dimensions |
|||
| Operating Length - Conveyor Up | 36.45 ft | 47.64 ft | - |
| Operating Width | 8.33 ft | 10.2 ft | - |
| Height - Canopy | 12.3 ft | 13.29 ft | - |
| Maximum Truck Clearance | 15.42 ft | 15.94 ft | - |
| Minimum Right Cutting Radius | 6.56 ft | 5.91 ft | - |
| Minimum Left Cutting Radius | 13.88 ft | 6.56 ft | - |
| Conveyor Swing | 60 degrees from center | 60 degrees from center | - |
| Transport Length | 30.58 ft | 40.78 ft | - |
| Transport Width | 8.33 lb/in | 8.99 ft | - |
| Transport Height | 9.84 ft | 9.84 ft | - |
Service Refill Capacities |
|||
| Cooling System | 16.4 gal (US) | 27.5 gal (US) | - |
| Hydraulic Tank | 15.6 gal (US) | 29.9 gal (US) | - |
| Water Spray System Tank | 332.9 gal (US) | 898.2 gal (US) | - |
| Engine Oil | 7.9 gal (US) | 17.2 gal (US) | - |
| Diesel Exhaust Fluid (DEF) Tank | 5.8 gal (US) | - | - |
| Fuel Tank | - | 292.7 gal (US) | - |
Add a Similar Product:
