Compare Equipment Go Back
 C18 ACERT™ Tier 4 Final Engine |
 3512C (HD) Well Stimulation Engine with Dynamic Gas Blending Kit |
 G3520 |
 3512C (HD) Land Mechanical Drilling Engine |
|
General Specifications |
||||
|---|---|---|---|---|
| Maximum Rating | 800 BHP | 2500 BHP | - | - |
| Displacement | 1104 in³ | 3574 in³ | - | - |
| Minimum Rating | 755 BHP | 2150 BHP | - | - |
| Governor and Protection | ADEM A4 | - | - | - |
| RPM | 1800 r/min | - | - | - |
| Aspiration | Turbocharged-Aftercooled | Turbocharged-Aftercooled | - | - |
| Flywheel and Flywheel Housing | SAE No. 0 or SAE No. 1 | SAE No. 0 | - | - |
| Flywheel Teeth | 136 (SAE 0), 113 (SAE 1) | 151 | - | - |
| Rotation from Flywheel End | Counterclockwise | - | - | - |
| Stroke | 7.2 in | 8.5 in | - | - |
| Bore | 5.7 in | 6.7 in | - | - |
Emissions |
||||
| Emissions | EPA Tier 4 Final and EU Stage IV | Non-current EPA Tier 2 | - | - |
Dimensions |
||||
| Length | 60.2 in | 110.4 in | 336 in | 105.6 in |
| Width | 37.8 in | 59.2 in | 94 in | 70.5 in |
| Height | 50.5 in | 86.3 in | 128 in | 79.5 in |
| Weight | 3482 lb | 14650 lb | 48501 lb | - |
Capacity for Liquids |
||||
| Cooling System | 7.1 gal (US) | - | - | - |
| Minimum Cooling System - Engine Only | - | - | - | 41 gal (US) |
Engine Specifications |
||||
| Emissions/Fuel Strategy | - | - | U.S. EPA Large S.I. Tier 2 / Non-Road Mobile Certified | - |
| Aspiration | - | - | Turbocharged | Turbocharged-Aftercooled |
| Bore | - | - | 6.7 in | 6.69 in |
| Stroke | - | - | 8.5 in | 8.46 in |
| Displacement | - | - | 5956 in³ | 3574 in³ |
| Engine Control and Protection | - | - | Electronic (ADEM 4) | - |
| Generator Set Control | - | - | EMCP 4 Control Panels | - |
| Frequency - Speed | - | - | 60 Hz | - |
| Compression Ratio | - | - | 11.5:1 | - |
| Fuel System | - | - | Electronic Fuel Control Valve | - |
| Maximum Rating | - | - | - | 1475 BHP |
| Emissions | - | - | - | U.S. EPA Non-road Tier 2 |
| Minimum Rating | - | - | - | 1250 BHP |
| Rated Speed | - | - | - | 1200 r/min |
| Governor and Protection | - | - | - | ADEM A3 |
| Engine Weight - Net Dry | - | - | - | 11945 lb |
| Rotation from Flywheel End | - | - | - | Counterclockwise |
| Oil Change Interval | - | - | - | 500 |
| Flywheel and Flywheel Housing | - | - | - | SAE No. 00 |
| Flywheel Teeth | - | - | - | 183 |
Add a Similar Product:
-
-
G3512 Add
-
C27 ACERT Tier 4i Oilfield Diesel Generator Set Add
-
C27 ACERT Tier 2 Oilfield Diesel Generator Set Add
-
C32 ACERT Tier 2 Oilfield Diesel Generator Set Add
-
C15 ACERT Tier 4i Oilfield Diesel Generator Set Add
-
C18 ACERT Tier 2 Oilfield Diesel Generator Set Add
-
C15 ACERT Tier 2 Oilfield Diesel Generator Set Add
-
3512 Land Mechanical Drilling Engine Add
-
3516 Land Mechanical Drilling Engine Add