Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011
404 HP
-
-
Engine Model
Cat C13
C15 Cat®
-
Note (1)
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards.
-
-
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
-
-
Note (3)
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h
-
-
Gross Torque @ 1,200 rpm – SAE J1995:2014
1636 lb/ft
-
-
Engine Torque @ 1,200 rpm – ISO 14396:2002
1620 lb/ft
-
-
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011
1515 lb/ft
-
-
Engine Power @ 1,700 rpm – ISO 14396:2002
432 HP
-
-
Gross Power @ 1,700 rpm – SAE J1995:2014
436 HP
-
-
Peak Power Speed
-
1600
-
Peak Power Speed - Gross - SAE J1995
-
456 HP
-
Engine Power - ISO 14396
-
449 HP
-
Net Power - SAE J1349
-
373 HP
-
Rated Speed
-
2000
-
Rated Speed - 2,000 rpm - EEC 80/1269
-
373 HP
-
Rated Speed - 2,000 rpm - EEC 80/1269 (DIN)
-
378 HP
-
Rated Speed - 2,000 rpm - ISO 9249
-
373 HP
-
Rated Speed - 2,000 rpm - ISO 9249 (DIN)
-
378 HP
-
Bore
-
5.4 in
-
Stroke
-
6.75 in
-
Displacement
-
927 in²
-
Peak Torque - 1,200 rpm - SAE J1995
-
1778 lb/ft
-
Torque Rise
-
16%
-
Emissions
-
U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA
-
Weights
Operating Weight
78264 lb
-
-
Note
Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun
-
-
Bucket Capacities
Bucket Range
4.8-17.2 m³ 6.25-22.5 yd³
-
-
Transmission
Forward - 1
3.9 mile/h
5 mile/h
-
Forward - 2
7.4 mile/h
8 mile/h
-
Forward - 3
13.1 mile/h
-
-
Forward - 4
23.3 mile/h
-
-
Note
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius.
-
-
Reverse - 1
4.3 mile/h
5 mile/h
-
Reverse - 2
8.5 mile/h
8 mile/h
-
Reverse - 3
15 mile/h
-
-
Reverse - 4
24.5 mile/h
-
-
Transmission Type
-
Cat planetary power shift
-
Direct Drive - Forward 2
-
8 mile/h
-
Direct Drive - Forward 3
-
14 mile/h
-
Direct Drive - Forward 4
-
24 mile/h
-
Direct Drive - Reverse 2
-
9 mile/h
-
Direct Drive - Reverse 3
-
16 mile/h
-
Direct Drive - Reverse 4
-
25.4 mile/h
-
Sound
Note (1)
** For machines in European Union countries and in countries that adopt the �EU Directives.�
-
-
Note (2)
***European Union Directive �2000/14/EC� as amended by �2005/88/EC.�
-
-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*
109
-
-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
72 dB(A)
-
-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)
112 dB(A)
-
-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)
78
-
-
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)
72 dB(A)
-
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
-
Operating Specifications
Breakout Force
59060 lbf
-
-
Note (1)
For a machine configuration as defined under �Weight.�
-
-
Note (2)
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
-
-
Static Tipping Load - Full 40° Turn - No Tire Deflection
22418 kg
-
-
Static Tipping Load - Full 40° Turn - With Tire Deflection
46526 lb
-
-
Operating Weight - Standard
-
97785 lb
-
Operating Weight - High Lift
-
104005 lb
-
Rated Payload - Standard (Quarry Face)
-
11 ton (US)
-
Rated Payload - Loose Material (Standard)
-
14 ton (US)
-
Rated Payload - High Lift (Quarry Face)
-
11 ton (US)
-
Rated Payload - Loose Material (High Lift)
-
12.1 ton (US)
-
Bucket Capacity Range
-
5-10,3 m³ (6,5-13,5 yd.³)
-
Cat Truck Match - Standard
-
770/735/740/745
-
Cat Truck Match - High Lift
-
772/773
-
Service Refill Capacities
Cooling System
13.7 gal (US)
-
-
Crankcase
9.8 gal (US)
9 gal (US)
-
DEF Tank
5.5 gal (US)
-
-
Differential - Final Drives - Front
24.3 gal (US)
-
-
Differential - Final Drives - Rear
24.3 gal (US)
-
-
Fuel Tank
112.5 gal (US)
141 gal (US)
-
Hydraulic Tank
40.4 gal (US)
-
-
Transmission
20.3 gal (US)
20 gal (US)
-
Fuel Tank - Short Lift
-
127 gal (US)
-
Cooling Systems
-
26 gal (US)
-
Diesel Exhaust Fluid Tank
-
6 gal (US)
-
Axle Oil - Differentials and Final Drives - Front
-
49 gal (US)
-
Axle Oil - Differentials and Final Drives - Rear
-
45 gal (US)
-
Hydraulic System Factory Fill
-
87 gal (US)
-
Hydraulic System - Tank Only
-
34 gal (US)
-
Hydraulic System
Implement System - Maximum Operating Pressure
4975 psi
-
-
Implement System - Maximum Pump Output at 2,250 rpm
119 gal/min
-
-
Dimensions
Note
All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires.
-
-
Dimensions - High Lift
Centerline of Rear Axle to Edge of Counterweight
9.4 ft
-
-
Centerline of Rear Axle to Hitch
6.3 ft
-
-
Ground Clearance
1.4 ft
-
-
Height - Top of Exhaust Pipe
12.4 ft
-
-
Height - Top of Hood
10 ft
-
-
Height - Top of ROPS
12.6 ft
-
-
Hinge Pin Height at Carry
2.11 ft
-
-
Hinge Pin Height at Maximum Lift
16.1 ft
-
-
Lift Arm Clearance at Maximum Lift
13.4 ft
-
-
Overall Length - Without Bucket
29.11 ft
-
-
Tread Width
8.4 ft
-
-
Wheel Base
12.6 ft
-
-
Width over Tires (Loaded)
11.5 ft
-
-
Dimensions - Standard Lift
Centerline of Rear Axle to Edge of Counterweight
8.9 ft
-
-
Centerline of Rear Axle to Hitch
6.3 ft
-
-
Ground Clearance
428 mm
-
-
Height - Top of Exhaust Pipe
3736 mm
-
-
Height - Top of Hood
3036 mm
-
-
Height - Top of ROPS
3801 mm
-
-
Hinge Pin Height at Carry
2.7 ft
-
-
Hinge Pin Height at Maximum Lift
4741 mm
-
-
Lift Arm Clearance at Maximum Lift
3902 mm
-
-
Overall Length - Without Bucket
8597 mm
-
-
Tread Width
8.4 ft
-
-
Wheel Base
3800 mm
-
-
Width over Tires (Loaded)
11.5 ft
-
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
-
Load Sense
-
Lift/Tilt System - Pump
-
2 × 110 cc variable displacement
-
Maximum Flow at 2,165 rpm
-
123 gal/min
-
Relief Valve Setting - Lift/Tilt
-
4050 psi
-
Lift Cylinder - Bore
-
7.5 in
-
Lift Cylinder - Stroke
-
45 in
-
Tilt Cylinder - Bore
-
6.7 in
-
Tilt Cylinder - Stroke
-
28.4 in
-
Hydraulic Cycle Times
Rack Back
-
4.5 s
-
Raise
-
9 s
-
Dump
-
3.5 s
-
Lower
-
5.2 s
-
Lower Float Down
-
4.3 s
-
Total Hydraulic Cycle Time
-
21.3 s
-
Hydraulic System - Steering
Steering System - Circuit
-
Load Sense
-
Steering System - Pump
-
Piston, variable displacement
-
Maximum Flow at 1,400 rpm
-
52 gal/min
-
Steering Cut Off Pressure
-
4000 psi
-
Total Steering Angle
-
70°
-
Axles
Front
-
Fixed
-
Rear
-
Trunnion
-
Oscillation Angle
-
±12.5°
-
Oscillation Angle - Chain Arrangement
-
±8.5°
-
Brakes
Brakes
-
ISO 3450:2011
-
Operator's Cab
ROPS/FOPS
-
ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)
-
Sound Performance - Standard
Operator Sound Level (ISO 6396)
-
72 dB(A)
-
Machine Sound Level (ISO 6395)
-
112 dB(A)
-
Note
-
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Hearing protection may be neede
-
Sound Performance - Suppression
Operator Sound Level (ISO 6396)
-
72 dB(A)
-
Machine Sound Level (ISO 6395)
-
110 dB(A)
-
Note
-
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Hearing protection may be neede
-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS
-
13.5 ft
-
Ground to Top of Exhaust Stacks
-
13.3 ft
-
Ground to Top of Hood
-
10.7 ft
-
Ground to Center of Front Axle
-
3.2 ft
-
Ground to Fuel Tank Clearance
-
2.3 ft
-
Ground to Lower Hitch Clearance
-
1.5 ft
-
Reach - Maximum Lift
-
7.1 ft
-
Clearance at Maximum Lift
-
10.1 ft
-
B-Pin Height - Maximum Lift
-
16.1 ft
-
Maximum Overall Height - Bucket Raised
-
22.4 ft
-
Rear Axle - Centerline to Bumper
-
10.3 ft
-
Wheel Base
-
12.5 ft
-
Maximum Overall Length
-
36.6 ft
-
Front Axle Centerline to Bucket Tip
-
13.8 ft
-
Note
-
All dimensions are approximate.
Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS
-
13.5 ft
-
Ground to Top of Exhaust Stacks
-
13.3 ft
-
Ground to Top of Hood
-
10.7 ft
-
Ground to Center of Front Axle
-
3.2 ft
-
Ground to Fuel Tank Clearance
-
2.3 ft
-
Ground to Lower Hitch Clearance
-
1.5 ft
-
Reach - Maximum Lift
-
7.4 ft
-
Clearance at Maximum Lift
-
11.6 ft
-
B-Pin Height - Maximum Lift
-
17.6 ft
-
Maximum Overall Height - Bucket Raised
-
23.9 ft
-
Rear Axle - Centerline to Bumper
-
10.3 ft
-
Wheel Base
-
12.5 ft
-
Maximum Overall Length
-
38 ft
-
Front Axle Centerline to Bucket Tip
-
15.3 ft
-
Note
-
All dimensions are approximate.
Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
