Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011
404 HP
-
-
Engine Model
Cat C13
Cat® 3516E
-
Note (1)
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards.
The power ratings apply when tested under the reference conditions for the specified standard.
-
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.
-
Note (3)
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h
The gross power advertised is with the fan at maximum speed.
-
Gross Torque @ 1,200 rpm – SAE J1995:2014
1636 lb/ft
-
-
Engine Torque @ 1,200 rpm – ISO 14396:2002
1620 lb/ft
-
-
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011
1515 lb/ft
-
-
Engine Power @ 1,700 rpm – ISO 14396:2002
432 HP
-
-
Gross Power @ 1,700 rpm – SAE J1995:2014
436 HP
-
-
Emissions
-
U.S. EPA Tier 4 Final/EU Stage V or
U.S. EPA Tier 1 equivalent
-
Engine Power - ISO 14396
-
1847 HP
-
Gross Power - SAE J1995
-
1870 HP
-
Net Power - SAE J1349 - Standard Ambient
-
1739 HP
-
Net Power - SAE J1349 - High Ambient
-
1696 HP
-
Bore
-
6.7 in
-
Stroke
-
8.5 in
-
Displacement
-
4766 in³
-
Peak Torque - 1,200 rpm - SAE J1995
-
8549 lb/ft
-
Torque Rise
-
39%
-
Weights
Operating Weight
78264 lb
-
-
Note
Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun
-
-
Bucket Capacities
Bucket Range
4.8-17.2 m³ 6.25-22.5 yd³
-
-
Transmission
Forward - 1
3.9 mile/h
4.6 mile/h
-
Forward - 2
7.4 mile/h
8 mile/h
-
Forward - 3
13.1 mile/h
13.6 mile/h
-
Forward - 4
23.3 mile/h
-
-
Note
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius.
Travel speeds based on 58/85-57 tires.
-
Reverse - 1
4.3 mile/h
5 mile/h
-
Reverse - 2
8.5 mile/h
8.8 mile/h
-
Reverse - 3
15 mile/h
14.9 mile/h
-
Reverse - 4
24.5 mile/h
-
-
Transmission Type
-
Cat Planetary Power Shift
-
Direct Drive - Forward 1
-
Lock-up disables
-
Direct Drive - Forward 2
-
8.7 mile/h
-
Direct Drive - Forward 3
-
15.2 mile/h
-
Direct Drive - Reverse 1
-
Lock-up disables
-
Direct Drive - Reverse 2
-
9.6 mile/h
-
Direct Drive - Reverse 3
-
16.8 mile/h
-
Sound
Note (1)
** For machines in European Union countries and in countries that adopt the �EU Directives.�
-
-
Note (2)
***European Union Directive �2000/14/EC� as amended by �2005/88/EC.�
-
-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*
109
-
-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
72 dB(A)
-
-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)
112 dB(A)
-
-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)
78
-
-
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)
72 dB(A)
-
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).
-
-
Operating Specifications
Breakout Force
59060 lbf
-
-
Note (1)
For a machine configuration as defined under �Weight.�
-
-
Note (2)
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
-
-
Static Tipping Load - Full 40° Turn - No Tire Deflection
22418 kg
-
-
Static Tipping Load - Full 40° Turn - With Tire Deflection
46526 lb
-
-
Operating Weight - Standard
-
543772 lb
-
Bucket Capacity Range
-
17.2-43.6 m3 (22.3-57 yd3)
-
Operating Weight - High Lift
-
547675 lb
-
Rated Payload - Standard Lift (Low to Moderate Digging Resistance)
-
60 ton (US)
-
Rated Payload - Standard Lift (Moderate to High Digging Resistance)
-
50 ton (US)
-
Rated Payload - High Lift (Low to Moderate Digging Resistance)
-
55 ton (US)
-
Rated Payload - High Lift (Moderate to High Digging Resistance)
-
50 ton (US)
-
Note
-
*Please contact your local dealer to determine if your application is suitable for this increased rated payload.
-
Cat Truck Match - Standard
-
785/789
-
Cat Truck Match - High Lift
-
789/793/794
-
Service Refill Capacities
Cooling System
13.7 gal (US)
-
-
Crankcase
9.8 gal (US)
-
-
DEF Tank
5.5 gal (US)
-
-
Differential - Final Drives - Front
24.3 gal (US)
-
-
Differential - Final Drives - Rear
24.3 gal (US)
-
-
Fuel Tank
112.5 gal (US)
-
-
Hydraulic Tank
40.4 gal (US)
-
-
Transmission
20.3 gal (US)
-
-
Hydraulic System
Implement System - Maximum Operating Pressure
4975 psi
-
-
Implement System - Maximum Pump Output at 2,250 rpm
119 gal/min
-
-
Dimensions
Note
All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires.
-
-
Dimensions - High Lift
Centerline of Rear Axle to Edge of Counterweight
9.4 ft
-
-
Centerline of Rear Axle to Hitch
6.3 ft
-
-
Ground Clearance
1.4 ft
-
-
Height - Top of Exhaust Pipe
12.4 ft
-
-
Height - Top of Hood
10 ft
-
-
Height - Top of ROPS
12.6 ft
-
-
Hinge Pin Height at Carry
2.11 ft
-
-
Hinge Pin Height at Maximum Lift
16.1 ft
-
-
Lift Arm Clearance at Maximum Lift
13.4 ft
-
-
Overall Length - Without Bucket
29.11 ft
-
-
Tread Width
8.4 ft
-
-
Wheel Base
12.6 ft
-
-
Width over Tires (Loaded)
11.5 ft
-
-
Dimensions - Standard Lift
Centerline of Rear Axle to Edge of Counterweight
8.9 ft
-
-
Centerline of Rear Axle to Hitch
6.3 ft
-
-
Ground Clearance
428 mm
-
-
Height - Top of Exhaust Pipe
3736 mm
-
-
Height - Top of Hood
3036 mm
-
-
Height - Top of ROPS
3801 mm
-
-
Hinge Pin Height at Carry
2.7 ft
-
-
Hinge Pin Height at Maximum Lift
4741 mm
-
-
Lift Arm Clearance at Maximum Lift
3902 mm
-
-
Overall Length - Without Bucket
8597 mm
-
-
Tread Width
8.4 ft
-
-
Wheel Base
3800 mm
-
-
Width over Tires (Loaded)
11.5 ft
-
-
Complete System Fill
Fuel Tank - Standard
-
856 gal (US)
-
Fuel Tank - With 24 hr Attachment
-
1414 gal (US)
-
Cooling System
-
138 gal (US)
-
Engine Crankcase
-
76 gal (US)
-
Transmission
-
110 gal (US)
-
Differential - Final Drives - Front
-
220 gal (US)
-
Differential - Final Drives - Rear
-
200 gal (US)
-
Hydraulic Tank - Implement and Hydraulic Fan
-
270 gal (US)
-
Hydraulic Tank - Steering and Braking
-
100 gal (US)
-
Oil Renewal System (ORS)*
-
20 gal (US)
-
Note
-
*Not available on Tier 4 Final/Stage V machines. Not available in all regions.
-
Axles
Front
-
Fixed
-
Rear
-
Trunnion
-
Oscillation Angle
-
9°
-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard
-
109.4 °F
-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)
-
131 °F
-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)
-
127.4 °F
-
Sound Performance - Standard
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent
-
74 dB(A)
-
Machine Sound Level (ISO 6395:2008)
-
119 dB(A)
-
Note
-
The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
-
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent
-
73 dB(A)
-
Machine Sound Level (ISO 6395:2008)
-
117 dB(A)
-
Note
-
The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
-
Hydraulic System - Steering
Steering System - Circuit
-
Pilot, Load Sensing
-
Steering System - Pump
-
Piston, Variable Displacement
-
Total Steering Angle
-
80 degrees
-
Steering Cycle Times - Low Idle
-
7.6 s
-
Steering Cycle Times - High Idle
-
4.3 s
-
Dimensions - Standard Lift - Approximate
B-Pin Height - Maximum Lift
-
28.8 ft
-
Clearance at Maximum Lift
-
19.8 ft
-
Dump Angle at Maximum Lift
-
–50.0 degrees
-
Front Axle Centerline to Bucket Tip
-
21.9 ft
-
Ground to Bumper Clearance
-
4.4 ft
-
Ground to Center of Axles
-
6 ft
-
Ground to Lower Hitch Clearance
-
2.9 ft
-
Ground to Top of Exhaust Stacks
-
23.2 ft
-
Ground to Top of Hood
-
18.6 ft
-
Ground to Top of ROPS
-
23.4 ft
-
Maximum Overall Height - Bucket Raised
-
39.3 ft
-
Maximum Overall Length
-
64.6 ft
-
Note
-
Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
-
Rack Angle at Maximum Lift
-
59.5 degrees
-
Rack Back Angle - Carry
-
47.7 degrees
-
Rack Back Angle - Ground Level
-
39.7 degrees
-
Reach - Maximum Lift
-
9.6 ft
-
Rear Axle - Centerline to Bumper
-
20.4 ft
-
Tread Width
-
14.1 ft
-
Wheel Base
-
22.3 ft
-
Width - Over Tires - With Bulge
-
18.8 ft
-
Dimensions - High Lift - Approximate
B-Pin Height - Maximum Lift
-
31.6 ft
-
Clearance at Maximum Lift
-
22.6 ft
-
Dump Angle at Maximum Lift
-
–50.0 degrees
-
Front Axle Centerline to Bucket Tip
-
24.2 ft
-
Ground to Bumper Clearance
-
4.4 ft
-
Ground to Center of Axles
-
6 ft
-
Ground to Lower Hitch Clearance
-
2.9 ft
-
Ground to Top of Exhaust Stacks
-
23.2 ft
-
Ground to Top of Hood
-
18.6 ft
-
Ground to Top of ROPS
-
23.4 ft
-
Maximum Overall Height - Bucket Raised
-
42.1 ft
-
Maximum Overall Length
-
66.9 ft
-
Note
-
Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.