CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    972 XE
    View Product
    988 XE Wheel Loader
    View Product Remove
    986 Wheel Loader
    View Product Remove
    992 Wheel Loader
    View Product Remove

    Engine
    Engine Power @ 1,600 rpm - ISO 14396:2002 339 HP - - -
    Gross Power @ 1,600 rpm - SAE J1995:2014 343 HP - - -
    Engine Model Cat C9.3B Cat® C18 ™ C15 Cat® Cat® C32B
    Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011 316 HP - - -
    Note (1) Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. - - -
    Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. - - -
    Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011 1287 ft-lb - - -
    Displacement 9.3 L 1105 in³ 927 in² 1963.5 in³
    Engine Torque @ 1,200 rpm – ISO 14396:2002 1375 lb/ft - - -
    Note (3) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h - - -
    Gross Torque @ 1,200 rpm – SAE J1995:2014 1388 lb/ft - - -
    Net Power - SAE J1349 - 538 HP 373 HP -
    Engine Power - ISO 14396:2002 - 580 HP - -
    Gross Power - SAE J1995:2014 - 588 HP - -
    Rated Speed - 1,700 rpm 2000 1750 rpm
    Peak Power Speed - 1,500 rpm 1600 -
    Emissions - U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent
    Bore - 5.7 in 5.4 in 5.7 in
    Stroke - 7.2 in 6.75 in 6.4 in
    Peak Torque - 1,200 rpm - SAE J1995 - 2230 ft·lbf 1778 lb/ft -
    Torque Rise - 58% 16% -
    Peak Power Speed - Gross - SAE J1995 - - 456 HP -
    Engine Power - ISO 14396 - - 449 HP -
    Rated Speed - 2,000 rpm - EEC 80/1269 - - 373 HP -
    Rated Speed - 2,000 rpm - EEC 80/1269 (DIN) - - 378 HP -
    Rated Speed - 2,000 rpm - ISO 9249 - - 373 HP -
    Rated Speed - 2,000 rpm - ISO 9249 (DIN) - - 378 HP -
    Net Power - - - 814 HP
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard - - - 900 HP
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient - - - 937 HP
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard - - - 907 HP
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient - - - 944 HP
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard - - - 884 HP
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient - - - 921 HP
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard - - - 893 HP
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient - - - 931 HP
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard - - - 814 HP
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient - - - 814 HP
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard - - - 823 HP
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient - - - 823 HP
    Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm - - - 3514 ft·lbf
    Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm - - - 3555 ft·lbf
    Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm - - - 3537 ft·lbf
    Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm - - - 3570 ft·lbf

    Weights
    Operating Weight 54858 lb - - -
    Note Weight based on a machine configuration with Bridgestone 26.5R25 VJTL3 radial tires, full fluids, operator, standard counterweight, ride control,cold start, roading fenders, Product Link, front manual differential/openrear axles, power train guard, second - - -

    Bucket Capacities
    Bucket Range 2.8-14.0 m³ 3.75-18.25 yd³ - - -

    Transmission
    Forward - 1 4.1 mile/h - 5 mile/h 4.3 mile/h
    Forward - 2 8.4 mile/h - 8 mile/h 7.4 mile/h
    Forward - 3 15 mile/h - - 12.7 mile/h
    Forward - 4 24.5 mile/h - - -
    Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius. - - -
    Reverse - 1 4.5 mile/h - 5 mile/h 4.7 mile/h
    Reverse - 2 9.2 mile/h - 8 mile/h 8.1 mile/h
    Reverse - 3 16.5 mile/h - - 13.9 mile/h
    Reverse - 4 24.5 mile/h - - -
    Transmission Type - Cat switched reluctance electric drive Cat planetary power shift Cat Planetary Powershift
    Forward 1 (virtual) - 4.3 mile/h - -
    Forward 2 (virtual) - 7 mile/h - -
    Forward 3 (virtual) - 13.8 mile/h - -
    Forward 4 (virtual) - 20 mile/h - -
    Reverse 1 (virtual) - 4.3 mile/h - -
    Reverse 2 (virtual) - 7 mile/h - -
    Reverse 3 (virtual) - 17.5 mile/h - -
    Direct Drive - Forward 2 - - 8 mile/h 8 mile/h
    Direct Drive - Forward 3 - - 14 mile/h 14 mile/h
    Direct Drive - Forward 4 - - 24 mile/h -
    Direct Drive - Reverse 2 - - 9 mile/h 8.8 mile/h
    Direct Drive - Reverse 3 - - 16 mile/h 15.3 mile/h
    Direct Drive - Reverse 4 - - 25.4 mile/h -
    Direct Drive - Forward 1 - - - Disabled
    Direct Drive - Reverse 1 - - - 5 mile/h

    Sound
    Note (1) ** For machines in European Union countries and in countries that adopt the EU Directives. - - -
    Note (2) ***European Union Directive 2000/14/EC as amended by 2005/88/EC. - - -
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* 108 - - -
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 69 dB(A) - - -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) 109 dB(A) - - -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) 76 - - -
    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) 70 dB(A) - - -
    With Cooling Fan Speed at Maximum Value - Note Distance of 15 m (49.2 ft), moving forward in second gear ratio. - - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. -

    Operating Specifications
    Breakout Force 44072 lb - - -
    Note (1) For a machine configuration as defined under Weight. - - -
    Note (2) Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. - - -
    Static Tipping Load - Full 40° Turn - No Tire Deflection 17505 kg - - -
    Static Tipping Load - Full 40° Turn - With Tire Deflection 35919 lb - - -
    Operating Weight - 116362 lb - 233430 lb
    Operating Weight - Standard - 116362 lb 97785 lb -
    Operating Weight - High Lift - 119618 lb 104005 lb -
    Rated Payload - Standard (Quarry Face) - 12.5 ton (US) 11 ton (US) -
    Rated Payload - Loose Material (Standard) - 16 ton (US) 14 ton (US) -
    Bucket Capacity Range - 4.7-13 m3 (6.2-17 yd3) 5-10,3 m³ (6,5-13,5 yd.³) 11.5-24.5 m³ (15-32 yd³)
    Rated Payload - High Lift (Quarry Face) - - 11 ton (US) -
    Rated Payload - Loose Material (High Lift) - - 12.1 ton (US) -
    Cat Truck Match - Standard - - 770/735/740/745 775/777
    Cat Truck Match - High Lift - - 772/773 785
    Rated Payload - Standard - - - 25.5 ton (US)
    Rated Payload - Standard (Material Handler) - - - 30 ton (US)
    Rated Payload - High Lift - - - 22.5 ton (US)
    Rated Payload - High Lift (Material Handler) - - - 27 ton (US)

    Service Refill Capacities
    Cooling System 17.4 gal (US) - - -
    Crankcase 6.1 gal (US) - 9 gal (US) 31.7 gal (US)
    DEF Tank 6.9 gal (US) - - -
    Differential - Final Drives - Front 15.1 gal (US) 49 gal (US) - 96.4 gal (US)
    Differential - Final Drives - Rear 15.1 gal (US) 49 gal (US) - 96.4 gal (US)
    Fuel Tank 80.1 gal (US) 147 gal (US) 141 gal (US) 385.7 gal (US)
    Hydraulic Tank 30.1 gal (US) - - -
    Transmission 15.5 gal (US) 16 gal (US) 20 gal (US) 51.5 gal (US)
    Cooling System - Jacket Water - 30 gal (US) - -
    Cooling Systems - Power Train - 8 gal (US) - -
    Engine Crankcase - 16 gal (US) - -
    Diesel Exhaust Fluid Tank - 8.7 gal (US) 6 gal (US) -
    Hydraulic System - Implement/Steering - 126 gal (US) - -
    Note - All nonroad Tier 4 Final/Stage V diesel engines are required to use: – The machine has the flexibility to run on either ultra-low-sulfur diesel fuel (ULSD with 15 ppm of sulfur or less). – Cat engines are compatible with the following renewable, alternati - -
    Fuel Tank - Short Lift - - 127 gal (US) -
    Cooling Systems - - 26 gal (US) 59.4 gal (US)
    Axle Oil - Differentials and Final Drives - Front - - 49 gal (US) -
    Axle Oil - Differentials and Final Drives - Rear - - 45 gal (US) -
    Hydraulic System Factory Fill - - 87 gal (US) -
    Hydraulic System - Tank Only - - 34 gal (US) -
    Hydraulic System Factory Fill (Implement) - - - 104.1 gal (US)
    Hydraulic Tank - Implement - - - 60.2 gal (US)
    Hydraulic Factory Fill (Steering) - - - 32.5 gal (US)
    Hydraulic Tank (Steering Tank Only) - - - 26.3 gal (US)

    Hydraulic System
    Implement System - Maximum Operating Pressure 4496 psi - - -
    Implement System - Maximum Pump Output at 2,250 rpm 99 gal/min - - -
    Hydraulic Cycle Time - Total 10.7 seconds - - -

    Dimensions
    Note All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires. - - -

    Dimensions - High Lift
    Centerline of Rear Axle to Edge of Counterweight 8.1 ft - - -
    Centerline of Rear Axle to Hitch 5.1 ft - - -
    Ground Clearance 1.4 ft - - -
    Height - Top of Exhaust Pipe 11.8 ft - - -
    Height - Top of Hood 9.5 ft - - -
    Height - Top of ROPS 11.1 ft - - -
    Hinge Pin Height at Carry 2.6 ft - - -
    Hinge Pin Height at Maximum Lift 15.9 ft - - -
    Lift Arm Clearance at Maximum Lift 13.8 ft - - -
    Overall Length - Without Bucket 26.6 ft - - -
    Tread Width 7.3 ft - - -
    Wheel Base 11.8 ft - - -
    Width over Tires (Loaded) 9.11 ft - - -
    Rack Back at Ground 37 degrees - - -
    Rack Back - Maximum Lift 71 degrees - - -
    Rack Back - Carry Height 49 degrees - - -

    Dimensions - Standard Lift
    Centerline of Rear Axle to Hitch 5.1 ft - - -
    Ground Clearance 420 mm - - -
    Height - Top of Exhaust Pipe 3527 mm - - -
    Height - Top of Hood 2846 mm - - -
    Height - Top of ROPS 3589 mm - - -
    Hinge Pin Height at Carry 2.2 ft - - -
    Hinge Pin Height at Maximum Lift 4464 mm - - -
    Lift Arm Clearance at Maximum Lift 3843 mm - - -
    Overall Length - Without Bucket 7731 mm - - -
    Tread Width 7.3 ft - - -
    Wheel Base 3550 mm - - -
    Width over Tires (Loaded) 9.11 ft - - -
    Rack Back - Carry Height 49 degrees - - -
    Rack Back at Ground 39 degrees - - -
    Centerline of Rear Axle to Edge of Counterweight 8 ft - - -
    Rack Back - Maximum Lift 56 degrees - - -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - EH-Positive Flow Control, Flow Sharing Load Sense Positive Flow Control
    Lift/Tilt System - Pump - Variable displacement piston 2 × 110 cc variable displacement Variable Displacement Piston
    Maximum Flow at 1,400-1,600 rpm - 153 gal/min - -
    Relief Valve Setting - Lift/Tilt - 4757 psi 4050 psi 5000 psi
    Lift Cylinder - Bore - 8.7 in 7.5 in 9.3 in
    Lift Cylinder - Stroke - 41.3 in 45 in 63.5 in
    Tilt Cylinder - Bore - 8.7 in 6.7 in 11.5 in
    Tilt Cylinder - Stroke - 27 in 28.4 in 41.5 in
    Maximum Flow at 2,165 rpm - - 123 gal/min 250 gal/min

    Hydraulic Cycle Times
    Rack Back - 4.5 s 4.5 s 2.3 s
    Raise - 8 s 9 s 9 s
    Dump - 2.2 s 3.5 s 2.6 s
    Lower Float Down - 3.5 s 4.3 s -
    Total Hydraulic Cycle Time - 18.2 s 21.3 s 17.1 s
    Lower - - 5.2 s -
    Rack Back - High Lift - - - 2.3 s
    Raise - High Lift - - - 9 s
    Dump - High Lift - - - 2.6 s
    Float Down - - - 3.2 s
    Float Down - High Lift - - - 3.2 s

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing Load Sense Pilot, Load Sensing
    Steering System - Pump - Piston, variable displacement Piston, variable displacement Piston, Variable Displacement
    Maximum Flow at 1,400-1,600 rpm - 71.3 gal/min - -
    Steering Cut Off Pressure - 4351 psi 4000 psi 4500 psi
    Total Steering Angle - 86° 70° 80°
    Steering Cycle Times - High Idle - 3.4 s - 3.1 s
    Steering Cycle Times - Low Idle - 5.6 s - 4.9 s
    Maximum Flow at 1,400 rpm - - 52 gal/min -
    Maximum Flow at 1,400-1,850 rpm - - - 70 gal/min

    Axles
    Front - Fixed Fixed Fixed
    Rear - Trunnion Trunnion Trunnion
    Oscillation Angle - 13° ±12.5° ±9°
    Oscillation Angle - Chain Arrangement - - ±8.5° -

    Brakes
    Brakes - ISO 3450:2011 ISO 3450:2011 ISO 3450:2011

    Operator's Cab
    ROPS/FOPS - ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS) -

    Sound Performance - Tier 4 Final / Stage V - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - 72 dB(A) - -
    Machine Sound Power Level (ISO 6395:2008) - 109 dB(A) - -

    Sound Performance - Tier 3 / Stage III - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - 72 dB(A) - -
    Machine Sound Power Level (ISO 6395:2008) - 110 dB(A) - -

    Dimensions (Approximate) - Standard Lift
    Ground to Top of ROPS - 13.8 ft - -
    Ground to Top of Exhaust Stacks - 14.8 ft - -
    Ground to Top of Hood - 10.9 ft - -
    Ground to Bumper Clearance - 3.1 ft - -
    Rear Axle - Centerline to Bumper - 10.5 ft - -
    Front Axle Centerline to Bucket Tip - 14 ft - -
    Wheel Base - 14.9 ft - -
    Maximum Overall Length - 39.3 ft - -
    Ground to Lower Hitch Clearance - 1.9 ft - -
    Ground to Center of Axles - 3.2 ft - -
    Clearance at Maximum Lift - 11.9 ft - -
    B-Pin Height - Maximum Lift - 18 ft - -
    Maximum Overall Height - Bucket Raised - 24.5 ft - -
    Reach - Maximum Lift - 6.5 ft - -
    Note - Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. - -

    Dimensions (Approximate) - High Lift
    Ground to Top of ROPS - 13.8 ft - -
    Ground to Top of Exhaust Stacks - 14.8 ft - -
    Ground to Top of Hood - 10.9 ft - -
    Ground to Bumper Clearance - 3.1 ft - -
    Rear Axle - Centerline to Bumper - 10.5 ft - -
    Front Axle Centerline to Bucket Tip - 15.3 ft - -
    Wheel Base - 14.9 ft - -
    Maximum Overall Length - 40.7 ft - -
    Ground to Lower Hitch Clearance - 1.9 ft - -
    Ground to Center of Axles - 3.2 ft - -
    Clearance at Maximum Lift - 13.3 ft - -
    B-Pin Height - Maximum Lift - 19.3 ft - -
    Maximum Overall Height - Bucket Raised - 25.8 ft - -
    Reach - Maximum Lift - 6.8 ft - -
    Note - Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. - -

    Dimensions - Millyard Linkage
    Ground to Top of ROPS - 13.8 ft - -
    Ground to Top of Exhaust Stacks - 13.8 ft - -
    Ground to Top of Hood - 10.9 ft - -
    Ground to Bumper Clearance - 3.1 ft - -
    Rear Axle - Centerline to Bumper - 10.5 ft - -
    Front Axle Centerline to Fork Tip - 16.5 ft - -
    Wheel Base - 14.9 ft - -
    Maximum Overall Length - 41.9 ft - -
    Ground to Lower Hitch Clearance - 1.9 ft - -
    Ground to Center of Front Axle - 3.2 ft - -
    Fork Height with Level Arms - 8.1 ft - -
    Fork Top Clamp Opening - 13.1 ft - -
    Fork Height at Maximum Lift - 17.2 ft - -
    Hinge Pin Height at Maximum Lift - 16.1 ft - -
    Dump Angle at Maximum Lift - -39.4 ° - -

    Buckets
    Bucket Capacities - 4.7-13 m3 (6.2-17 yd3) - 11.5-24.5 m³ (15-32 yd³)

    Sustainability
    Recyclability - 96% - -

    Sound Performance - Standard
    Operator Sound Level (ISO 6396) - - 72 dB(A) -
    Machine Sound Level (ISO 6395) - - 112 dB(A) -
    Note - -
    • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
    • Hearing protection may be neede
    		Machine Sound Level (ISO 6396:2008) - 116 dB(A)

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396) - - 72 dB(A) -
    Machine Sound Level (ISO 6395) - - 110 dB(A) -
    Note - -
    • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
    • Hearing protection may be neede
    		Machine Sound Level (ISO 6396:2008) - 113 dB(A)

    Dimensions (Approximate) - Standard Lift Linkage
    Ground to Top of ROPS - - 13.5 ft -
    Ground to Top of Exhaust Stacks - - 13.3 ft -
    Ground to Top of Hood - - 10.7 ft -
    Ground to Center of Front Axle - - 3.2 ft -
    Ground to Fuel Tank Clearance - - 2.3 ft -
    Ground to Lower Hitch Clearance - - 1.5 ft -
    Reach - Maximum Lift - - 7.1 ft -
    Clearance at Maximum Lift - - 10.1 ft -
    B-Pin Height - Maximum Lift - - 16.1 ft -
    Maximum Overall Height - Bucket Raised - - 22.4 ft -
    Rear Axle - Centerline to Bumper - - 10.3 ft -
    Wheel Base - - 12.5 ft -
    Maximum Overall Length - - 36.6 ft -
    Front Axle Centerline to Bucket Tip - - 13.8 ft -
    Note - -
    • All dimensions are approximate.
    • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
    		 -

    Dimensions (Approximate) - High Lift Linkage
    Ground to Top of ROPS - - 13.5 ft -
    Ground to Top of Exhaust Stacks - - 13.3 ft -
    Ground to Top of Hood - - 10.7 ft -
    Ground to Center of Front Axle - - 3.2 ft -
    Ground to Fuel Tank Clearance - - 2.3 ft -
    Ground to Lower Hitch Clearance - - 1.5 ft -
    Reach - Maximum Lift - - 7.4 ft -
    Clearance at Maximum Lift - - 11.6 ft -
    B-Pin Height - Maximum Lift - - 17.6 ft -
    Maximum Overall Height - Bucket Raised - - 23.9 ft -
    Rear Axle - Centerline to Bumper - - 10.3 ft -
    Wheel Base - - 12.5 ft -
    Maximum Overall Length - - 38 ft -
    Front Axle Centerline to Bucket Tip - - 15.3 ft -
    Note - -
    • All dimensions are approximate.
    • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
    		 -

    Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
    Ground to Top of ROPS - - 13.5 ft -
    Ground to Top of Exhaust Stacks - - 13.3 ft -
    Ground to Top of Hood - - 10.7 ft -
    Ground to Center of Rear Axle - - 3.2 ft -
    Ground to Fuel Tank Clearance - - 2.3 ft -
    Ground to Lower Hitch Clearance - - 1.5 ft -
    Reach at Maximum Lift - - 8 ft -
    Clearance at Maximum Lift - - 10.7 ft -
    B-Pin Height at Maximum Lift - - 15 ft -
    Maximum Overall Height, Bucket Raised - - 20.9 ft -
    Rear Axle Center Line to Bumper - - 10.3 ft -
    Wheel Base - - 12.5 ft -
    Maximum Overall Length - - 35 ft -
    Front Axle Centerline to Bucket Tip - - 12.2 ft -

    Dimensions (Approximate) - Quick Coupler and Fork
    Ground to Top of ROPS - - 13.5 ft -
    Ground to Top of Exhaust Stacks - - 13.3 ft -
    Ground to Top of Hood - - 10.7 ft -
    Ground to Center of Rear Axle - - 3.2 ft -
    Ground to Fuel Tank Clearance - - 2.3 ft -
    Ground to Lower Hitch Clearance - - 1.5 ft -
    B-Pin Height at Maximum Lift - - 15 ft -
    Rear Axle Center Line to Bumper - - 10.3 ft -
    Wheel Base - - 12.5 ft -
    Maximum Overall Length - - 35.4 ft -
    Front Axle Centerline to Bucket Tip - - 12.6 ft -

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard - - - 109.4 °F
    Ambient Capability, Hydraulically Driven Demand Fan - High - - - 131 °F

    Dimensions - Standard Lift - Approximate
    Ground to Top of Exhaust Stacks - - - 17 ft
    Ground to Top of ROPS - - - 18.3 ft
    Ground to Top of Hood - - - 13.1 ft
    Ground to Center of Front Axle - - - 4.3 ft
    Ground to Bumper Clearance - - - 3.8 ft
    Ground to Lower Hitch Clearance - - - 2.2 ft
    Reach - Maximum Lift - - - 8.2 ft
    Clearance at Maximum Lift - - - 15.2 ft
    B-Pin Height - Maximum Lift - - - 22.8 ft
    Maximum Overall Height - Bucket Raised - - - 30.8 ft
    Rear Axle - Centerline to Bumper - - - 13.5 ft
    Tread Width - - - 10.83 ft
    Rack Back Angle - Maximum Lift - - - 56.9 degrees
    Dump Angle at Maximum Lift - - - -49.5 degrees
    Rack Back Angle - Ground Level - - - 40.2 degrees
    Width - Over Tires - With Bulge - - - 14.74 ft
    Rack Back Angle - Carry - - - 48.9 degrees
    Wheel Base - - - 19.3 ft
    Maximum Overall Length - - - 50.8 ft
    Front Axle Centerline to Bucket Tip - - - 18 ft

    Dimensions - High Lift - Approximate
    Tread Width - - - 10.83 ft
    Rack Back Angle - Ground Level - - - 42.5 degrees
    Dump Angle at Maximum Lift - - - -48.1 degrees
    Rack Back Angle - Maximum Lift - - - 56.2 degrees
    Width - Over Tires - With Bulge - - - 14.75 ft
    Rack Back Angle - Carry - - - 51.6 degrees
    Ground to Top of Exhaust Stacks - - - 17 ft
    Ground to Top of ROPS - - - 18.3 ft
    Ground to Top of Hood - - - 13.1 ft
    Ground to Center of Front Axle - - - 4.3 ft
    Ground to Bumper Clearance - - - 3.8 ft
    Ground to Lower Hitch Clearance - - - 2.2 ft
    Reach - Maximum Lift - - - 7.6 ft
    Clearance at Maximum Lift - - - 17.2 ft
    B-Pin Height - Maximum Lift - - - 24.5 ft
    Maximum Overall Height - Bucket Raised - - - 32 ft
    Rear Axle - Centerline to Bumper - - - 13.5 ft
    Wheel Base - - - 19.3 ft
    Maximum Overall Length - - - 51.6 ft
    Front Axle Centerline to Bucket Tip - - - 18.8 ft
    Add a Similar Product: