Compare Equipment Go Back

988 GC Wheel Loader
995 Wheel Loader

Engine

Engine Power @ 1,600 rpm - ISO 14396:2002 339 HP - - 339 HP
Gross Power @ 1,600 rpm - SAE J1995:2014 342 HP - - 343 HP
Engine Model Cat C9.3B Cat® C15 Cat® 3516E Cat C9.3B
Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011 321 HP - - 316 HP
Note (1) Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards. - The power ratings apply when tested under the reference conditions for the specified standard. Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011 1316 ft-lb - - 1287 ft-lb
Engine Torque @ 1,200 rpm – ISO 14396:2002 1375 lb/ft - - 1375 lb/ft
Note (3) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h - The gross power advertised is with the fan at maximum speed. Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h
Gross Torque @ 1,200 rpm – SAE J1995:2014 1388 lb/ft - - 1388 lb/ft
Displacement 9.3 L 927 in³ 4766 in³ 9.3 L
Rated Speed - 2000 - -
Peak Power Speed - 1600 - -
Engine Power - ISO 14396 - 449 HP 1847 HP -
Gross Power - SAE J1995 - 456 HP 1870 HP -
Net Power - SAE J1349 - 373 HP - -
Emissions - U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent -
Bore - 5.4 in 6.7 in -
Stroke - 6.75 in 8.5 in -
Peak Torque - 1,200 rpm - SAE J1995 - 1778 ft·lbf 8549 lb/ft -
Torque Rise - 16% 39% -
Net Power - SAE J1349 - Standard Ambient - - 1739 HP -
Net Power - SAE J1349 - High Ambient - - 1696 HP -

Weights

Operating Weight 54858 lb - - 54858 lb
Note Weight based on a machine configuration with Bridgestone 26.5R25 VJTL3 radial tires, full fluids, operator, standard counterweight, ride control,cold start, roading fenders, Product Link, front manual differential/openrear axles, power train guard, second - - Weight based on a machine configuration with Bridgestone 26.5R25 VJTL3 radial tires, full fluids, operator, standard counterweight, ride control,cold start, roading fenders, Product Link, front manual differential/openrear axles, power train guard, second

Bucket Capacities

Bucket Range 2.8-14.0 m³ 3.75-18.25 yd³ - - 2.8-14.0 m³ 3.75-18.25 yd³

Transmission

Forward - 1 4.1 mile/h 5 mile/h 4.6 mile/h 4.1 mile/h
Forward - 2 8.4 mile/h 8 mile/h 8 mile/h 8.4 mile/h
Forward - 3 15 mile/h - 13.6 mile/h 15 mile/h
Forward - 4 24.5 mile/h - - 24.5 mile/h
Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius. - Travel speeds based on 58/85-57 tires. Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius.
Reverse - 1 4.5 mile/h 5 mile/h 5 mile/h 4.5 mile/h
Reverse - 2 9.2 mile/h 8 mile/h 8.8 mile/h 9.2 mile/h
Reverse - 3 16.5 mile/h - 14.9 mile/h 16.5 mile/h
Reverse - 4 24.5 mile/h - - 24.5 mile/h
Transmission Type - Cat planetary power shift Cat Planetary Power Shift -
Direct Drive - Forward 1 - Lock-up disabled Lock-up disables -
Direct Drive - Forward 2 - 8 mile/h 8.7 mile/h -
Direct Drive - Forward 3 - 14 mile/h 15.2 mile/h -
Direct Drive - Forward 4 - 24 mile/h - -
Direct Drive - Reverse 1 - Lock-up disabled Lock-up disables -
Direct Drive - Reverse 2 - 9 mile/h 9.6 mile/h -
Direct Drive - Reverse 3 - 16 mile/h 16.8 mile/h -
Direct Drive - Reverse 4 - 25.4 mile/h - -

Sound

Note (1) ** For machines in European Union countries and in countries that adopt the EU Directives. - - ** For machines in European Union countries and in countries that adopt the EU Directives.
Note (2) ***European Union Directive 2000/14/EC as amended by 2005/88/EC. - - ***European Union Directive 2000/14/EC as amended by 2005/88/EC.
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* 108 - - 108
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 69 dB(A) - - 69 dB(A)
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) 109 dB(A) - - 109 dB(A)
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) 76 - - 76
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) 70 dB(A) - - 70 dB(A)
With Cooling Fan Speed at Maximum Value - Note Distance of 15 m (49.2 ft), moving forward in second gear ratio. - - Distance of 15 m (49.2 ft), moving forward in second gear ratio.

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons).

Operating Specifications

Breakout Force 44072 lb - - 44072 lb
Note (1) For a machine configuration as defined under Weight. - - For a machine configuration as defined under Weight.
Note (2) Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. - - Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Static Tipping Load - Full 40° Turn - No Tire Deflection 17505 kg - - 17505 kg
Static Tipping Load - Full 40° Turn - With Tire Deflection 35919 lb - - 35919 lb
Operating Weight - 116858 lb - -
Rated Payload - Quarry Face - 12.5 ton (US) - -
Bucket Capacity Range - 6.4-7.6 m3 (8.3-10 yd3) 17.2-43.6 m3 (22.3-57 yd3) -
Cat Truck Match - High Lift - 772/773/775 789/793/794 -
Operating Weight - Standard - - 543772 lb -
Operating Weight - High Lift - - 547675 lb -
Rated Payload - Standard Lift (Low to Moderate Digging Resistance) - - 60 ton (US) -
Rated Payload - Standard Lift (Moderate to High Digging Resistance) - - 50 ton (US) -
Rated Payload - High Lift (Low to Moderate Digging Resistance) - - 55 ton (US) -
Rated Payload - High Lift (Moderate to High Digging Resistance) - - 50 ton (US) -
Note - - *Please contact your local dealer to determine if your application is suitable for this increased rated payload. -
Cat Truck Match - Standard - - 785/789 -

Service Refill Capacities

Cooling System 17.4 gal (US) 27 gal (US) - 17.4 gal (US)
Crankcase 6.1 gal (US) - - 6.1 gal (US)
DEF Tank 6.9 gal (US) - - 6.9 gal (US)
Differential - Final Drives - Front 15.1 gal (US) 49 gal (US) - 15.1 gal (US)
Differential - Final Drives - Rear 15.1 gal (US) 45 gal (US) - 15.1 gal (US)
Fuel Tank 80.1 gal (US) 141 gal (US) - 80.1 gal (US)
Hydraulic Tank 30.1 gal (US) - - 30.1 gal (US)
Transmission 15.5 gal (US) 20 gal (US) - 15.5 gal (US)
Engine Crankcase - 9 gal (US) - -
Diesel Exhaust Fluid Tank - 5.5 gal (US) - -
Note - Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a - -

Hydraulic System

Implement System - Maximum Operating Pressure 4496 psi - - 4496 psi
Implement System - Maximum Pump Output at 2,250 rpm 99 gal/min - - 99 gal/min
Hydraulic Cycle Time - Total 10.7 seconds - - 10.7 seconds

Dimensions

Note All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires. - - All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.

Dimensions - High Lift

Centerline of Rear Axle to Edge of Counterweight 8.1 ft - - 8.1 ft
Centerline of Rear Axle to Hitch 5.1 ft - - 5.1 ft
Ground Clearance 1.4 ft - - 1.4 ft
Height - Top of Exhaust Pipe 11.8 ft - - 11.8 ft
Height - Top of Hood 9.5 ft - - 9.5 ft
Height - Top of ROPS 11.1 ft - - 11.1 ft
Hinge Pin Height at Carry 2.6 ft - - 2.6 ft
Hinge Pin Height at Maximum Lift 15.9 ft - - 15.9 ft
Lift Arm Clearance at Maximum Lift 13.8 ft - - 13.8 ft
Overall Length - Without Bucket 26.6 ft - - 26.6 ft
Tread Width 7.3 ft - - 7.3 ft
Wheel Base 11.8 ft - - 11.8 ft
Rack Back at Ground 37 degrees - - 37 degrees
Rack Back - Maximum Lift 71 degrees - - 71 degrees
Rack Back - Carry Height 49 degrees - - 49 degrees
Width over Tires (Loaded) 9.11 ft - - 9.11 ft

Dimensions - Standard Lift

Centerline of Rear Axle to Hitch 5.1 ft - - 5.1 ft
Ground Clearance 420 mm - - 420 mm
Height - Top of Exhaust Pipe 3527 mm - - 3527 mm
Height - Top of Hood 2846 mm - - 2846 mm
Height - Top of ROPS 3589 mm - - 3589 mm
Hinge Pin Height at Carry 2.2 ft - - 2.2 ft
Hinge Pin Height at Maximum Lift 4464 mm - - 4464 mm
Lift Arm Clearance at Maximum Lift 3843 mm - - 3843 mm
Overall Length - Without Bucket 7731 mm - - 7731 mm
Tread Width 7.3 ft - - 7.3 ft
Wheel Base 3550 mm - - 3550 mm
Rack Back at Ground 39 degrees - - 39 degrees
Width over Tires (Loaded) 9.11 ft - - 9.11 ft
Centerline of Rear Axle to Edge of Counterweight 8 ft - - 8 ft
Rack Back - Maximum Lift 56 degrees - - 56 degrees
Rack Back - Carry Height 49 degrees - - 49 degrees

Hydraulic System - Lift/Tilt

Lift/Tilt System - Circuit - EH - Load Sense Positive Flow Control -
Lift/Tilt System - 2X x 145 cc Variable displacement piston - -
Maximum Flow at 2,165 rpm - 159 gal/min - -
Relief Valve Setting - Lift/Tilt - 4598 psi 5004 psi -
Cylinders, Double Acting - Lift, Bore and Stroke - 190 mm x 1216 mm (7.5 in x 48 in) 370 × 1713 mm (14.6 × 67.4 in) -
Cylinders, Double Acting - Tilt, Bore and Stroke - 170 mm x 722 mm (6.7 in x 28.4 in) 310 × 1086 mm (12.2 × 42.8 in) -
Pilot System - Variable displacement piston Open Loop and Pressure Reducing -
Tilt Cylinder - Stroke - 27 in - -
Lift/Tilt System - Pump - - Variable Displacement Piston -
Maximum Flow at 1,700 rpm Engine Speed - - 541 gal/min -

Hydraulic Cycle Times

Rack Back - 3.8 s 4.9 s -
Raise - 7.5 s 12.6 s -
Dump - 3 s 3.1 s -
Lower Float Down - 4.6 s 4.2 s -
Total Hydraulic Cycle Time - Empty Bucket - 18.9 s - -

Hydraulic System - Steering

Steering System - Circuit - Pilot, load sensing Pilot, Load Sensing -
Steering System - Pump - Piston, variable displacement Piston, Variable Displacement -
Maximum Flow - 52 gal (US) - -
Relief Valve Setting - Steering - 4000 psi - -
Total Steering Angle - 70° 80 degrees -
Steering Cycle Times - High Idle - 3 s 4.3 s -
Steering Cycle Times - Low Idle - 5.2 s 7.6 s -

Axles

Front - Fixed Fixed -
Rear - Trunnion Trunnion -
Oscillation Angle - +/-12.5° -

Brakes

Brakes - ISO 3450:2011 ISO 3450:2011 -

Operator's Cab

ROPS/FOPS - ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards - -

Sound Performance - Tier 4 Final/EU Stage V - Standard

Operator Sound Level (ISO 6396) - 72 dB(A) - -
Machine Sound Level (ISO 6395) - 110 dB(A) - -
Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - -
Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - -
Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - -

Dimensions (Approximate) - High Lift

Ground to Top of ROPS - 13.5 ft - -
Ground to Top of Exhaust Stacks - 13.3 ft - -
Ground to Top of Hood - 10.7 ft - -
Rear Axle - Centerline to Bumper - 10.3 ft - -
Front Axle Centerline to Bucket Tip - 15.7 ft - -
Wheel Base - 12.5 ft - -
Maximum Overall Length - 39.5 ft - -
Ground to Lower Hitch Clearance - 1.5 ft - -
Clearance at Maximum Lift - 12 ft - -
B-Pin Height - Maximum Lift - 18.7 ft - -
Maximum Overall Height - Bucket Raised - 25 ft - -
Reach - Maximum Lift - 7.7 ft - -
Note - Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires. - -

Buckets

Bucket Capacities - 6.4-7.6 m3 (8.3-10 yd3) - -

Sustainability

Recyclability - 96% - -

Complete System Fill

Fuel Tank - Standard - - 856 gal (US) -
Fuel Tank - With 24 hr Attachment - - 1414 gal (US) -
Cooling System - - 138 gal (US) -
Engine Crankcase - - 76 gal (US) -
Transmission - - 110 gal (US) -
Differential - Final Drives - Front - - 220 gal (US) -
Differential - Final Drives - Rear - - 200 gal (US) -
Hydraulic Tank - Implement and Hydraulic Fan - - 270 gal (US) -
Hydraulic Tank - Steering and Braking - - 100 gal (US) -
Oil Renewal System (ORS)* - - 20 gal (US) -
Note - - *Not available on Tier 4 Final/Stage V machines. Not available in all regions. -

Cooling System

Ambient Capability Hydraulically Driven Demand Fan - Standard - - 109.4 °F -
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) - - 131 °F -
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) - - 127.4 °F -

Sound Performance - Standard

Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - - 74 dB(A) -
Machine Sound Level (ISO 6395:2008) - - 119 dB(A) -
Note - - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c -

Sound Performance - Suppression

Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - - 73 dB(A) -
Machine Sound Level (ISO 6395:2008) - - 117 dB(A) -
Note - - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c -

Dimensions - Standard Lift - Approximate

B-Pin Height - Maximum Lift - - 28.8 ft -
Clearance at Maximum Lift - - 19.8 ft -
Dump Angle at Maximum Lift - - –50.0 degrees -
Front Axle Centerline to Bucket Tip - - 21.9 ft -
Ground to Bumper Clearance - - 4.4 ft -
Ground to Center of Axles - - 6 ft -
Ground to Lower Hitch Clearance - - 2.9 ft -
Ground to Top of Exhaust Stacks - - 23.2 ft -
Ground to Top of Hood - - 18.6 ft -
Ground to Top of ROPS - - 23.4 ft -
Maximum Overall Height - Bucket Raised - - 39.3 ft -
Maximum Overall Length - - 64.6 ft -
Note - - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. -
Rack Angle at Maximum Lift - - 59.5 degrees -
Rack Back Angle - Carry - - 47.7 degrees -
Rack Back Angle - Ground Level - - 39.7 degrees -
Reach - Maximum Lift - - 9.6 ft -
Rear Axle - Centerline to Bumper - - 20.4 ft -
Tread Width - - 14.1 ft -
Wheel Base - - 22.3 ft -
Width - Over Tires - With Bulge - - 18.8 ft -

Dimensions - High Lift - Approximate

B-Pin Height - Maximum Lift - - 31.6 ft -
Clearance at Maximum Lift - - 22.6 ft -
Dump Angle at Maximum Lift - - –50.0 degrees -
Front Axle Centerline to Bucket Tip - - 24.2 ft -
Ground to Bumper Clearance - - 4.4 ft -
Ground to Center of Axles - - 6 ft -
Ground to Lower Hitch Clearance - - 2.9 ft -
Ground to Top of Exhaust Stacks - - 23.2 ft -
Ground to Top of Hood - - 18.6 ft -
Ground to Top of ROPS - - 23.4 ft -
Maximum Overall Height - Bucket Raised - - 42.1 ft -
Maximum Overall Length - - 66.9 ft -
Note - - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. -
Rack Angle at Maximum Lift - - 59.4 degrees -
Rack Back Angle - Carry - - 53.5 degrees -
Rack Back Angle - Ground Level - - 45 degrees -
Reach - Maximum Lift - - 9.4 ft -
Rear Axle - Centerline to Bumper - - 20.4 ft -
Tread Width - - 14.1 ft -
Wheel Base - - 22.3 ft -
Width - Over Tires - With Bulge - - 18.8 ft -
Add a Similar Product: