CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    966 XE
    View Product
    988 Wheel Loader
    View Product Remove
    995 Wheel Loader
    View Product Remove

    Engine
    Engine Power @ 1,600 rpm - ISO 14396:2002 321 HP - -
    Gross Power @ 1,600 rpm - SAE J1995:2014 325 HP - -
    Engine Model Cat C9.3B Cat® C18 ™ Cat® 3516E
    Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011 298 HP - -
    Note (1) Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. - The power ratings apply when tested under the reference conditions for the specified standard.
    Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.
    Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011 1226 HP - -
    Note (3) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h - The gross power advertised is with the fan at maximum speed.
    Gross Torque @ 1,200 rpm – SAE J1995:2014 1327 lb/ft - -
    Engine Torque @ 1,200 rpm – ISO 14396:2002 1313 lb/ft - -
    Displacement 9.3 L 1105 in³ 4766 in³
    Net Power - SAE J1349:2011 - 538 HP -
    Engine Power - ISO 14396:2002 - 580 HP -
    Gross Power - SAE J1995:2014 - 588 HP -
    Rated Speed - 1700/min -
    Peak Power Speed - 1500/rpm -
    Emissions - U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards, Brazil MAR-1 and China Nonroad Stage IV emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA, and U.S. EPA Tier 2 and EU Stage II U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent
    Bore - 5.7 in 6.7 in
    Stroke - 7.2 in 8.5 in
    Peak Torque - 1,200 rpm - 2230 lb/ft -
    Torque Rise - 58 % 39%
    Engine Power - ISO 14396 - - 1847 HP
    Gross Power - SAE J1995 - - 1870 HP
    Net Power - SAE J1349 - Standard Ambient - - 1739 HP
    Net Power - SAE J1349 - High Ambient - - 1696 HP
    Peak Torque - 1,200 rpm - SAE J1995 - - 8549 lb/ft

    Weights
    Operating Weight 51124 lb - -
    Note Weight based on a machine configuration with Bridgestone 26.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, front manual differential/open rear axles, power train guard, sec - -

    Bucket Capacities
    Bucket Range 2.8-11.9 m³ 3.75-15.5 yd³ - -

    Transmission
    Forward - 1 4.3 mile/h 4 mile/h 4.6 mile/h
    Forward - 2 8 mile/h 7.2 mile/h 8 mile/h
    Forward - 3 14.1 mile/h 12.7 mile/h 13.6 mile/h
    Forward - 4 24.5 mile/h 21.6 mile/h -
    Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius. - Travel speeds based on 58/85-57 tires.
    Reverse - 1 4.3 mile/h 4.7 mile/h 5 mile/h
    Reverse - 2 8 mile/h 8.3 mile/h 8.8 mile/h
    Reverse - 3 17.9 mile/h 14.4 mile/h 14.9 mile/h
    Transmission Type - Cat planetary powershift Cat Planetary Power Shift
    Direct Drive - Forward 1 - Lock-up disabled Lock-up disables
    Direct Drive - Forward 2 - 7.8 mile/h 8.7 mile/h
    Direct Drive - Forward 3 - 13.9 mile/h 15.2 mile/h
    Direct Drive - Forward 4 - 24.4 mile/h -
    Direct Drive - Reverse 1 - 5 mile/h Lock-up disables
    Direct Drive - Reverse 2 - 8.9 mile/h 9.6 mile/h
    Direct Drive - Reverse 3 - 15.8 mile/h 16.8 mile/h

    Sound
    Note (1) ** For machines in European Union countries and in countries that adopt the EU Directives. - -
    Note (2) ***European Union Directive 2000/14/EC as amended by 2005/88/EC. - -
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* 105 - -
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 67 dB(A) - -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) 107 dB(A) - -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) 74 - -
    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) 67 dB(A) - -
    With Cooling Fan Speed at Maximum Value - Note Distance of 15 m (49.2 ft), moving forward in second gear ratio. - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. -

    Operating Specifications
    Breakout Force 38999 lb - -
    Note (1) For a machine configuration as defined under �Weight.� - -
    Note (2) Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. - -
    Static Tipping Load - Full 40° Turn - No Tire Deflection 15981 kg - -
    Static Tipping Load - Full 40° Turn - With Tire Deflection 32727 lb - -
    Operating Weight - 112574 lb -
    Rated Payload - Quarry Face - 12.5 t -
    Rated Payload - Loose Material - 16 t -
    Bucket Capacity Range - 4.7-13 m3 (6.2-17 yd3) 17.2-43.6 m3 (22.3-57 yd3)
    Cat Truck Match - Standard - 770～772 785/789
    Cat Truck Match - High Lift - 773～775 789/793/794
    Operating Weight - Standard - - 543772 lb
    Operating Weight - High Lift - - 547675 lb
    Rated Payload - Standard Lift (Low to Moderate Digging Resistance) - - 60 ton (US)
    Rated Payload - Standard Lift (Moderate to High Digging Resistance) - - 50 ton (US)
    Rated Payload - High Lift (Low to Moderate Digging Resistance) - - 55 ton (US)
    Rated Payload - High Lift (Moderate to High Digging Resistance) - - 50 ton (US)
    Note - - *Please contact your local dealer to determine if your application is suitable for this increased rated payload.

    Service Refill Capacities
    Cooling System 17.4 gal (US) 31.7 gal (US) -
    Crankcase 6.1 gal (US) 15.9 gal (US) -
    DEF Tank 6.9 gal (US) - -
    Differential - Final Drives - Front 15.1 gal (US) 49.1 gal (US) -
    Differential - Final Drives - Rear 15.1 gal (US) 49.1 gal (US) -
    Fuel Tank 80.1 gal (US) 188 gal (US) -
    Hydraulic Tank 30.1 gal (US) - -
    Transmission 16.6 gal (US) 31.7 gal (US) -
    Coolant (Validated by Test Cell Fill Quantities) - 33 gal (US) -
    Diesel Exhaust Fluid Tank - 8.7 gal (US) -
    Transmission - Validated by Test Cell Fill Quantities - 29 gal (US) -
    Hydraulic System Factory Fill - 125.5 gal (US) -
    Hydraulic System - Tank Only - 63.4 gal (US) -

    Hydraulic System
    Implement System - Maximum Operating Pressure 4496 psi - -
    Implement System - Maximum Pump Output at 2,250 rpm 92 gal/min - -
    Hydraulic Cycle Time - Total 10.1 seconds - -

    Dimensions
    Note All dimensions are approximate and based on machine equipped with 4.2 m3 (5.5 yd3) general purpose bucket with BOCE and Bridgestone 26.5R25 VJT L3 radial tires. - -

    Dimensions - High Lift
    Centerline of Rear Axle to Edge of Counterweight 8.1 ft - -
    Centerline of Rear Axle to Hitch 5.1 ft - -
    Ground Clearance 1.4 ft - -
    Height - Top of Exhaust Pipe 11.8 ft - -
    Height - Top of Hood 9.5 ft - -
    Height - Top of ROPS 11.1 ft - -
    Hinge Pin Height at Carry 2.6 ft - -
    Hinge Pin Height at Maximum Lift 15.9 ft - -
    Lift Arm Clearance at Maximum Lift 13.8 ft - -
    Overall Length - Without Bucket 26.6 ft - -
    Tread Width 7.3 ft - -
    Wheel Base 11.8 ft - -
    Rack Back at Ground 37 degrees - -
    Width over Tires (Loaded) 9.11 ft - -
    Rack Back - Maximum Lift 71 degrees - -
    Rack Back - Carry Height 49 degrees - -

    Dimensions - Standard Lift
    Centerline of Rear Axle to Edge of Counterweight 7.7 ft - -
    Centerline of Rear Axle to Hitch 5.1 ft - -
    Ground Clearance 424 mm - -
    Height - Top of Exhaust Pipe 3531 mm - -
    Height - Top of Hood 2580 mm - -
    Height - Top of ROPS 3593 mm - -
    Hinge Pin Height at Carry 2 ft - -
    Hinge Pin Height at Maximum Lift 4245 mm - -
    Lift Arm Clearance at Maximum Lift 3687 mm - -
    Overall Length - Without Bucket 7399 mm - -
    Tread Width 7.3 ft - -
    Wheel Base 3550 mm - -
    Width over Tires (Loaded) 9.11 ft - -
    Rack Back - Carry Height 50 degrees - -
    Rack Back at Ground 40 degrees - -
    Rack Back - Maximum Lift 62 degrees - -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - EH- Positive Flow Control, Flow Sharing Positive Flow Control
    Lift/Tilt System - Variable displacement piston -
    Maximum Flow at 1,400-1,860 rpm - 153 gal/min -
    Relief Valve Setting - Lift/Tilt - 4757 psi 5004 psi
    Cylinders, Double Acting - Lift, Bore and Stroke - 210 mm × 1050 mm (8.7 in × 41.3 in) 370 × 1713 mm (14.6 × 67.4 in)
    Cylinders, Double Acting - Tilt, Bore and Stroke - 269 mm × 685 mm (8.7 in × 27 in) 310 × 1086 mm (12.2 × 42.8 in)
    Pilot System - Variable displacement piston Open Loop and Pressure Reducing
    Relief Valve Setting - Main - 551 psi -
    Lift/Tilt System - Pump - - Variable Displacement Piston
    Maximum Flow at 1,700 rpm Engine Speed - - 541 gal/min

    Hydraulic Cycle Time (1,400-1,860 rpm)
    Rack Back - 4.5 s -
    Raise - 8 s -
    Dump - 2.2 s -
    Lower Float Down - 3.5 s -
    Total Hydraulic Cycle Time - Empty Bucket - 18.2 s -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing Pilot, Load Sensing
    Steering System - Pump - Piston, variable displacement Piston, Variable Displacement
    Maximum Flow - 71.3 gal/min -
    Relief Valve Setting - Steering - 4351 psi -
    Total Steering Angle - 86 ° 80 degrees
    Steering Cycle Times - High Idle - 3.4 s 4.3 s
    Steering Cycle Times - Low Idle - 5.6 s 7.6 s

    Axles
    Front - Fixed Fixed
    Rear - Trunnion Trunnion
    Oscillation Angle - 13 ° 9°

    Brakes
    Brakes - ISO 3450:2011 ISO 3450:2011

    Operator's Cab
    ROPS/FOPS - ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards -

    Sound Performance - Tier 4 Final / Stage V - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - 73 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - 111 dB(A) -

    Sound Performance - Tier 3 / Stage III - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - 73 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - 112 dB(A) -

    Dimensions (Approximate) - Standard Lift Linkage
    Ground to Top of ROPS - 13.8 ft -
    Ground to Top of Exhaust Stacks - 14.8 ft -
    Ground to Top of Hood - 10.9 ft -
    Rear Axle - Centerline to Bumper - 10.5 ft -
    Front Axle Centerline to Bucket Tip - 14 ft -
    Wheel Base - 14.9 ft -
    Maximum Overall Length - 39.3 ft -
    Ground to Lower Hitch Clearance - 1.9 ft -
    Clearance at Maximum Lift - 11.9 ft -
    B-Pin Height - Maximum Lift - 18 ft -
    Maximum Overall Height - Bucket Raised - 24.5 ft -
    Reach - Maximum Lift - 6.5 ft -

    Dimensions (Approximate) - High Lift Linkage
    Ground to Top of ROPS - 13.8 ft -
    Ground to Top of Exhaust Stacks - 14.8 ft -
    Ground to Top of Hood - 10.9 ft -
    Rear Axle - Centerline to Bumper - 10.5 ft -
    Front Axle Centerline to Bucket Tip - 15.3 ft -
    Wheel Base - 14.9 ft -
    Maximum Overall Length - 40.7 ft -
    Ground to Lower Hitch Clearance - 1.9 ft -
    Clearance at Maximum Lift - 13.3 ft -
    B-Pin Height - Maximum Lift - 19.3 ft -
    Maximum Overall Height - Bucket Raised - 25.8 ft -
    Reach - Maximum Lift - 6.8 ft -

    Buckets
    Bucket Capacities - 4.7-13 m3 (6.2-17 yd3) -

    Complete System Fill
    Fuel Tank - Standard - - 856 gal (US)
    Fuel Tank - With 24 hr Attachment - - 1414 gal (US)
    Cooling System - - 138 gal (US)
    Engine Crankcase - - 76 gal (US)
    Transmission - - 110 gal (US)
    Differential - Final Drives - Front - - 220 gal (US)
    Differential - Final Drives - Rear - - 200 gal (US)
    Hydraulic Tank - Implement and Hydraulic Fan - - 270 gal (US)
    Hydraulic Tank - Steering and Braking - - 100 gal (US)
    Oil Renewal System (ORS)* - - 20 gal (US)
    Note - - *Not available on Tier 4 Final/Stage V machines. Not available in all regions.

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard - - 109.4 °F
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) - - 131 °F
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) - - 127.4 °F

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - - 74 dB(A)
    Machine Sound Level (ISO 6395:2008) - - 119 dB(A)
    Note - - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - - 73 dB(A)
    Machine Sound Level (ISO 6395:2008) - - 117 dB(A)
    Note - - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c

    Dimensions - Standard Lift - Approximate
    B-Pin Height - Maximum Lift - - 28.8 ft
    Clearance at Maximum Lift - - 19.8 ft
    Dump Angle at Maximum Lift - - –50.0 degrees
    Front Axle Centerline to Bucket Tip - - 21.9 ft
    Ground to Bumper Clearance - - 4.4 ft
    Ground to Center of Axles - - 6 ft
    Ground to Lower Hitch Clearance - - 2.9 ft
    Ground to Top of Exhaust Stacks - - 23.2 ft
    Ground to Top of Hood - - 18.6 ft
    Ground to Top of ROPS - - 23.4 ft
    Maximum Overall Height - Bucket Raised - - 39.3 ft
    Maximum Overall Length - - 64.6 ft
    Note - - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
    Rack Angle at Maximum Lift - - 59.5 degrees
    Rack Back Angle - Carry - - 47.7 degrees
    Rack Back Angle - Ground Level - - 39.7 degrees
    Reach - Maximum Lift - - 9.6 ft
    Rear Axle - Centerline to Bumper - - 20.4 ft
    Tread Width - - 14.1 ft
    Wheel Base - - 22.3 ft
    Width - Over Tires - With Bulge - - 18.8 ft

    Dimensions - High Lift - Approximate
    B-Pin Height - Maximum Lift - - 31.6 ft
    Clearance at Maximum Lift - - 22.6 ft
    Dump Angle at Maximum Lift - - –50.0 degrees
    Front Axle Centerline to Bucket Tip - - 24.2 ft
    Ground to Bumper Clearance - - 4.4 ft
    Ground to Center of Axles - - 6 ft
    Ground to Lower Hitch Clearance - - 2.9 ft
    Ground to Top of Exhaust Stacks - - 23.2 ft
    Ground to Top of Hood - - 18.6 ft
    Ground to Top of ROPS - - 23.4 ft
    Maximum Overall Height - Bucket Raised - - 42.1 ft
    Maximum Overall Length - - 66.9 ft
    Note - - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
    Rack Angle at Maximum Lift - - 59.4 degrees
    Rack Back Angle - Carry - - 53.5 degrees
    Rack Back Angle - Ground Level - - 45 degrees
    Reach - Maximum Lift - - 9.4 ft
    Rear Axle - Centerline to Bumper - - 20.4 ft
    Tread Width - - 14.1 ft
    Wheel Base - - 22.3 ft
    Width - Over Tires - With Bulge - - 18.8 ft

    Hydraulic Cycle Times
    Rack Back - - 4.9 s
    Raise - - 12.6 s
    Dump - - 3.1 s
    Lower Float Down - - 4.2 s
    Add a Similar Product: