CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    966 XE
    View Product
    990 Wheel Loader
    View Product Remove
    988 Wheel Loader
    View Product Remove

    Engine
    Engine Power @ 1,600 rpm - ISO 14396:2002 321 HP - -
    Gross Power @ 1,600 rpm - SAE J1995:2014 325 HP - -
    Engine Model Cat C9.3B C27 Cat® Cat® C18 ™
    Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011 298 HP - -
    Note (1) Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. - -
    Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. - -
    Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011 1226 HP - -
    Note (3) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h - -
    Gross Torque @ 1,200 rpm – SAE J1995:2014 1327 lb/ft - -
    Engine Torque @ 1,200 rpm – ISO 14396:2002 1313 lb/ft - -
    Displacement 9.3 L 1649.5 in³ 1105 in³
    Rated Speed - 1,800/min 1700/min
    Engine Power - ISO 14396 - 752 HP -
    Gross Power - SAE J1995 - 766 HP -
    Net Power - SAE J1349 - Standard Ambient - 699 HP -
    Net Power - SAE J1349 - High Ambient - 648 HP -
    Bore - 5.4 in 5.7 in
    Stroke - 6 in 7.2 in
    Peak Torque - 1,200 rpm - 2624 lb/ft 2230 lb/ft
    Torque Rise - 18 % 58 %
    Emissions - U.S. EPA TIer 4 Final and EU Stage V emission standards or U.S. EPA Tier 2 and EU Stage II equivalent U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards, Brazil MAR-1 and China Nonroad Stage IV emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA, and U.S. EPA Tier 2 and EU Stage II
    Net Power - SAE J1349:2011 - - 538 HP
    Engine Power - ISO 14396:2002 - - 580 HP
    Gross Power - SAE J1995:2014 - - 588 HP
    Peak Power Speed - - 1500/rpm

    Weights
    Operating Weight 51124 lb - -
    Note Weight based on a machine configuration with Bridgestone 26.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, front manual differential/open rear axles, power train guard, sec - -

    Bucket Capacities
    Bucket Range 2.8-11.9 m³ 3.75-15.5 yd³ - -

    Transmission
    Forward - 1 4.3 mile/h 4.5 mile/h 4 mile/h
    Forward - 2 8 mile/h 8.3 mile/h 7.2 mile/h
    Forward - 3 14.1 mile/h 14.2 mile/h 12.7 mile/h
    Forward - 4 24.5 mile/h - 21.6 mile/h
    Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius. Travel speeds based on Michelin 45/65R39 LD D2**L5 tires. -
    Reverse - 1 4.3 mile/h 4.9 mile/h 4.7 mile/h
    Reverse - 2 8 mile/h 9.1 mile/h 8.3 mile/h
    Reverse - 3 17.9 mile/h 15.5 mile/h 14.4 mile/h
    Transmission Type - Cat planetary power shift Cat planetary powershift
    Direct Drive - Forward 1 - Lock-up disabled Lock-up disabled
    Direct Drive - Forward 2 - 8.5 mile/h 7.8 mile/h
    Direct Drive - Forward 3 - 15.2 mile/h 13.9 mile/h
    Direct Drive - Reverse 1 - 5.4 mile/h 5 mile/h
    Direct Drive - Reverse 2 - 9.6 mile/h 8.9 mile/h
    Direct Drive - Reverse 3 - 16.4 mile/h 15.8 mile/h
    Direct Drive - Forward 4 - - 24.4 mile/h

    Sound
    Note (1) ** For machines in European Union countries and in countries that adopt the EU Directives. - -
    Note (2) ***European Union Directive 2000/14/EC as amended by 2005/88/EC. - -
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* 105 - -
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 67 dB(A) - -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) 107 dB(A) - -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) 74 - -
    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) 67 dB(A) - -
    With Cooling Fan Speed at Maximum Value - Note Distance of 15 m (49.2 ft), moving forward in second gear ratio. - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.7 kg of refrigerant which has a CO2 equivalent of 3.861 metric tonnes (4.256 tons). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Operating Specifications
    Breakout Force 38999 lb - -
    Note (1) For a machine configuration as defined under �Weight.� - -
    Note (2) Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. - -
    Static Tipping Load - Full 40° Turn - No Tire Deflection 15981 kg - -
    Static Tipping Load - Full 40° Turn - With Tire Deflection 32727 lb - -
    Operating Weight - 178517 lb 112574 lb
    Rated Payload - Standard - 17.5 ton (US) -
    Rated Payload - High Lift - 17.5 ton (US) -
    Bucket Capacity Range - 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³) 4.7-13 m3 (6.2-17 yd3)
    Cat Truck Match - Standard - 773-775 770～772
    Cat Truck Match - High Lift - 775-777 773～775
    Rated Payload - Quarry Face - - 12.5 t
    Rated Payload - Loose Material - - 16 t

    Service Refill Capacities
    Cooling System 17.4 gal (US) 54.9 gal (US) 31.7 gal (US)
    Crankcase 6.1 gal (US) - 15.9 gal (US)
    DEF Tank 6.9 gal (US) - -
    Differential - Final Drives - Front 15.1 gal (US) 71.6 gal (US) 49.1 gal (US)
    Differential - Final Drives - Rear 15.1 gal (US) 68.9 gal (US) 49.1 gal (US)
    Fuel Tank 80.1 gal (US) 294.3 gal (US) 188 gal (US)
    Hydraulic Tank 30.1 gal (US) - -
    Transmission 16.6 gal (US) 29.1 gal (US) 31.7 gal (US)
    Engine Crankcase - 20 gal (US) -
    Hydraulic System Factory Fill - 210 gal (US) 125.5 gal (US)
    Hydraulic Tank - Implement and Hydraulic Fan - 68.9 gal (US) -
    Hydraulic Tank - Steering and Braking - 34.9 gal (US) -
    Note - All nonroad U.S. EPA Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or l -
    Coolant (Validated by Test Cell Fill Quantities) - - 33 gal (US)
    Diesel Exhaust Fluid Tank - - 8.7 gal (US)
    Transmission - Validated by Test Cell Fill Quantities - - 29 gal (US)
    Hydraulic System - Tank Only - - 63.4 gal (US)

    Hydraulic System
    Implement System - Maximum Operating Pressure 4496 psi - -
    Implement System - Maximum Pump Output at 2,250 rpm 92 gal/min - -
    Hydraulic Cycle Time - Total 10.1 seconds - -

    Dimensions
    Note All dimensions are approximate and based on machine equipped with 4.2 m3 (5.5 yd3) general purpose bucket with BOCE and Bridgestone 26.5R25 VJT L3 radial tires. - -

    Dimensions - High Lift
    Centerline of Rear Axle to Edge of Counterweight 8.1 ft - -
    Centerline of Rear Axle to Hitch 5.1 ft - -
    Ground Clearance 1.4 ft - -
    Height - Top of Exhaust Pipe 11.8 ft - -
    Height - Top of Hood 9.5 ft - -
    Height - Top of ROPS 11.1 ft - -
    Hinge Pin Height at Carry 2.6 ft - -
    Hinge Pin Height at Maximum Lift 15.9 ft - -
    Lift Arm Clearance at Maximum Lift 13.8 ft - -
    Overall Length - Without Bucket 26.6 ft - -
    Tread Width 7.3 ft - -
    Wheel Base 11.8 ft - -
    Rack Back at Ground 37 degrees - -
    Width over Tires (Loaded) 9.11 ft - -
    Rack Back - Maximum Lift 71 degrees - -
    Rack Back - Carry Height 49 degrees - -

    Dimensions - Standard Lift
    Centerline of Rear Axle to Edge of Counterweight 7.7 ft - -
    Centerline of Rear Axle to Hitch 5.1 ft - -
    Ground Clearance 424 mm - -
    Height - Top of Exhaust Pipe 3531 mm - -
    Height - Top of Hood 2580 mm - -
    Height - Top of ROPS 3593 mm - -
    Hinge Pin Height at Carry 2 ft - -
    Hinge Pin Height at Maximum Lift 4245 mm - -
    Lift Arm Clearance at Maximum Lift 3687 mm - -
    Overall Length - Without Bucket 7399 mm - -
    Tread Width 7.3 ft - -
    Wheel Base 3550 mm - -
    Width over Tires (Loaded) 9.11 ft - -
    Rack Back - Carry Height 50 degrees - -
    Rack Back at Ground 40 degrees - -
    Rack Back - Maximum Lift 62 degrees - -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Positive flow control EH- Positive Flow Control, Flow Sharing
    Lift/Tilt System - Variable displacement piston Variable displacement piston
    Maximum Flow at 1,800 rpm (1) - 240 gal/min -
    Cylinders, Double Acting - Lift, Bore and Stroke - 235 mm × 1287 mm (9.3 in × 50.7 in) 210 mm × 1050 mm (8.7 in × 41.3 in)
    Cylinders, Double Acting - Tilt, Bore and Stroke - 292.1 mm × 820 mm (11.5 in × 32.3 in) 269 mm × 685 mm (8.7 in × 27 in)
    Pilot System - Open loop and pressure reducing Variable displacement piston
    Relief Valve Setting - Main - 507 psi 551 psi
    Relief Valve Setting - Lift/Tilt - 4786 psi 4757 psi
    Maximum Flow at 1,400-1,860 rpm - - 153 gal/min

    Hydraulic Cycle Times
    Rack Back - 4.3 s -
    Raise - 8.2 s -
    Dump - 2.9 s -
    Lower - 3.7 s -
    Lower Float Down - 3.6 s -
    Total Hydraulic Cycle Time - Empty Bucket - 13.8 s -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing Pilot, load sensing
    Steering System - Pump - Piston, variable displacement Piston, variable displacement
    Maximum Flow at 1,400 rpm - 96.2 gal/min -
    Relief Valve Setting - Steering - 5004 psi 4351 psi
    Total Steering Angle - 70° 86 °
    Maximum Flow - - 71.3 gal/min
    Steering Cycle Times - High Idle - - 3.4 s
    Steering Cycle Times - Low Idle - - 5.6 s

    Axles
    Front - Fixed Fixed
    Rear - Trunnion Trunnion
    Oscillation Angle - 8.5° 13 °

    Brakes
    Brakes - ISO 3450: 2011 ISO 3450:2011

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - 65.5 dB(A) -
    Machine Sound Level (ISO 6395:2008) - 115 dB(A) -

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - 65.5 dB(A) -
    Machine Sound Level (ISO 6395:2008) - 113 dB(A) -

    Buckets
    Bucket Capacities - 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³) 4.7-13 m3 (6.2-17 yd3)

    Hydraulic Cycle Time (1,400-1,860 rpm)
    Rack Back - - 4.5 s
    Raise - - 8 s
    Dump - - 2.2 s
    Lower Float Down - - 3.5 s
    Total Hydraulic Cycle Time - Empty Bucket - - 18.2 s

    Operator's Cab
    ROPS/FOPS - - ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards

    Sound Performance - Tier 4 Final / Stage V - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - - 73 dB(A)
    Machine Sound Power Level (ISO 6395:2008) - - 111 dB(A)

    Sound Performance - Tier 3 / Stage III - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - - 73 dB(A)
    Machine Sound Power Level (ISO 6395:2008) - - 112 dB(A)

    Dimensions (Approximate) - Standard Lift Linkage
    Ground to Top of ROPS - - 13.8 ft
    Ground to Top of Exhaust Stacks - - 14.8 ft
    Ground to Top of Hood - - 10.9 ft
    Rear Axle - Centerline to Bumper - - 10.5 ft
    Front Axle Centerline to Bucket Tip - - 14 ft
    Wheel Base - - 14.9 ft
    Maximum Overall Length - - 39.3 ft
    Ground to Lower Hitch Clearance - - 1.9 ft
    Clearance at Maximum Lift - - 11.9 ft
    B-Pin Height - Maximum Lift - - 18 ft
    Maximum Overall Height - Bucket Raised - - 24.5 ft
    Reach - Maximum Lift - - 6.5 ft

    Dimensions (Approximate) - High Lift Linkage
    Ground to Top of ROPS - - 13.8 ft
    Ground to Top of Exhaust Stacks - - 14.8 ft
    Ground to Top of Hood - - 10.9 ft
    Rear Axle - Centerline to Bumper - - 10.5 ft
    Front Axle Centerline to Bucket Tip - - 15.3 ft
    Wheel Base - - 14.9 ft
    Maximum Overall Length - - 40.7 ft
    Ground to Lower Hitch Clearance - - 1.9 ft
    Clearance at Maximum Lift - - 13.3 ft
    B-Pin Height - Maximum Lift - - 19.3 ft
    Maximum Overall Height - Bucket Raised - - 25.8 ft
    Reach - Maximum Lift - - 6.8 ft
    Add a Similar Product: