|
|
|
|
Engine |
| Engine Power @ 1,600 rpm - ISO 14396:2002 |
321 HP |
- |
- |
| Gross Power @ 1,600 rpm - SAE J1995:2014 |
325 HP |
- |
- |
| Engine Model |
Cat C9.3B |
Cat® C15 |
C27 Cat® |
| Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011 |
298 HP |
- |
- |
| Note (1) |
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
- |
- |
| Note (2) |
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
- |
- |
| Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011 |
1226 HP |
- |
- |
| Note (3) |
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h |
- |
- |
| Gross Torque @ 1,200 rpm – SAE J1995:2014 |
1327 lb/ft |
- |
- |
| Engine Torque @ 1,200 rpm – ISO 14396:2002 |
1313 lb/ft |
- |
- |
| Displacement |
9.3 L |
927 in³ |
1649.5 in³ |
| Rated Speed |
- |
2000 |
1,800/min |
| Peak Power Speed |
- |
1600 |
- |
| Engine Power - ISO 14396 |
- |
449 HP |
752 HP |
| Gross Power - SAE J1995 |
- |
456 HP |
766 HP |
| Net Power - SAE J1349 |
- |
373 HP |
- |
| Emissions |
- |
U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 |
U.S. EPA TIer 4 Final and EU Stage V emission standards or U.S. EPA Tier 2 and EU Stage II equivalent |
| Bore |
- |
5.4 in |
5.4 in |
| Stroke |
- |
6.75 in |
6 in |
| Peak Torque - 1,200 rpm - SAE J1995 |
- |
1778 ft·lbf |
- |
| Torque Rise |
- |
16% |
18 % |
| Net Power - SAE J1349 - Standard Ambient |
- |
- |
699 HP |
| Net Power - SAE J1349 - High Ambient |
- |
- |
648 HP |
| Peak Torque - 1,200 rpm |
- |
- |
2624 lb/ft |
Weights |
| Operating Weight |
51124 lb |
- |
- |
| Note |
Weight based on a machine configuration with Bridgestone 26.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, front manual differential/open rear axles, power train guard, sec |
- |
- |
Bucket Capacities |
| Bucket Range |
2.8-11.9 m³ 3.75-15.5 yd³ |
- |
- |
Transmission |
| Forward - 1 |
4.3 mile/h |
5 mile/h |
4.5 mile/h |
| Forward - 2 |
8 mile/h |
8 mile/h |
8.3 mile/h |
| Forward - 3 |
14.1 mile/h |
- |
14.2 mile/h |
| Forward - 4 |
24.5 mile/h |
- |
- |
| Note |
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius. |
- |
Travel speeds based on Michelin 45/65R39 LD D2**L5 tires. |
| Reverse - 1 |
4.3 mile/h |
5 mile/h |
4.9 mile/h |
| Reverse - 2 |
8 mile/h |
8 mile/h |
9.1 mile/h |
| Reverse - 3 |
17.9 mile/h |
- |
15.5 mile/h |
| Transmission Type |
- |
Cat planetary power shift |
Cat planetary power shift |
| Direct Drive - Forward 1 |
- |
Lock-up disabled |
Lock-up disabled |
| Direct Drive - Forward 2 |
- |
8 mile/h |
8.5 mile/h |
| Direct Drive - Forward 3 |
- |
14 mile/h |
15.2 mile/h |
| Direct Drive - Forward 4 |
- |
24 mile/h |
- |
| Direct Drive - Reverse 1 |
- |
Lock-up disabled |
5.4 mile/h |
| Direct Drive - Reverse 2 |
- |
9 mile/h |
9.6 mile/h |
| Direct Drive - Reverse 3 |
- |
16 mile/h |
16.4 mile/h |
| Direct Drive - Reverse 4 |
- |
25.4 mile/h |
- |
Sound |
| Note (1) |
** For machines in European Union countries and in countries that adopt the EU Directives. |
- |
- |
| Note (2) |
***European Union Directive 2000/14/EC as amended by 2005/88/EC. |
- |
- |
| With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* |
105 |
- |
- |
| With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) |
67 dB(A) |
- |
- |
| With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) |
107 dB(A) |
- |
- |
| With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) |
74 |
- |
- |
| With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) |
67 dB(A) |
- |
- |
| With Cooling Fan Speed at Maximum Value - Note |
Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
- |
- |
Air Conditioning System |
| Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).
The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons). |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.7 kg of refrigerant which has a CO2 equivalent of 3.861 metric tonnes (4.256 tons). |
Operating Specifications |
| Breakout Force |
38999 lb |
- |
- |
| Note (1) |
For a machine configuration as defined under �Weight.� |
- |
- |
| Note (2) |
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
- |
- |
| Static Tipping Load - Full 40° Turn - No Tire Deflection |
15981 kg |
- |
- |
| Static Tipping Load - Full 40° Turn - With Tire Deflection |
32727 lb |
- |
- |
| Operating Weight |
- |
116858 lb |
178517 lb |
| Rated Payload - Quarry Face |
- |
12.5 ton (US) |
- |
| Bucket Capacity Range |
- |
6.4-7.6 m3 (8.3-10 yd3) |
8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³) |
| Cat Truck Match - High Lift |
- |
772/773/775 |
775-777 |
| Rated Payload - Standard |
- |
- |
17.5 ton (US) |
| Rated Payload - High Lift |
- |
- |
17.5 ton (US) |
| Cat Truck Match - Standard |
- |
- |
773-775 |
Service Refill Capacities |
| Cooling System |
17.4 gal (US) |
27 gal (US) |
54.9 gal (US) |
| Crankcase |
6.1 gal (US) |
- |
- |
| DEF Tank |
6.9 gal (US) |
- |
- |
| Differential - Final Drives - Front |
15.1 gal (US) |
49 gal (US) |
71.6 gal (US) |
| Differential - Final Drives - Rear |
15.1 gal (US) |
45 gal (US) |
68.9 gal (US) |
| Fuel Tank |
80.1 gal (US) |
141 gal (US) |
294.3 gal (US) |
| Hydraulic Tank |
30.1 gal (US) |
- |
- |
| Transmission |
16.6 gal (US) |
20 gal (US) |
29.1 gal (US) |
| Engine Crankcase |
- |
9 gal (US) |
20 gal (US) |
| Diesel Exhaust Fluid Tank |
- |
5.5 gal (US) |
- |
| Note |
- |
Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a |
All nonroad U.S. EPA Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or l |
| Hydraulic System Factory Fill |
- |
- |
210 gal (US) |
| Hydraulic Tank - Implement and Hydraulic Fan |
- |
- |
68.9 gal (US) |
| Hydraulic Tank - Steering and Braking |
- |
- |
34.9 gal (US) |
Hydraulic System |
| Implement System - Maximum Operating Pressure |
4496 psi |
- |
- |
| Implement System - Maximum Pump Output at 2,250 rpm |
92 gal/min |
- |
- |
| Hydraulic Cycle Time - Total |
10.1 seconds |
- |
- |
Dimensions |
| Note |
All dimensions are approximate and based on machine equipped with 4.2 m3 (5.5 yd3) general purpose bucket with BOCE and Bridgestone 26.5R25 VJT L3 radial tires. |
- |
- |
Dimensions - High Lift |
| Centerline of Rear Axle to Edge of Counterweight |
8.1 ft |
- |
- |
| Centerline of Rear Axle to Hitch |
5.1 ft |
- |
- |
| Ground Clearance |
1.4 ft |
- |
- |
| Height - Top of Exhaust Pipe |
11.8 ft |
- |
- |
| Height - Top of Hood |
9.5 ft |
- |
- |
| Height - Top of ROPS |
11.1 ft |
- |
- |
| Hinge Pin Height at Carry |
2.6 ft |
- |
- |
| Hinge Pin Height at Maximum Lift |
15.9 ft |
- |
- |
| Lift Arm Clearance at Maximum Lift |
13.8 ft |
- |
- |
| Overall Length - Without Bucket |
26.6 ft |
- |
- |
| Tread Width |
7.3 ft |
- |
- |
| Wheel Base |
11.8 ft |
- |
- |
| Rack Back at Ground |
37 degrees |
- |
- |
| Width over Tires (Loaded) |
9.11 ft |
- |
- |
| Rack Back - Maximum Lift |
71 degrees |
- |
- |
| Rack Back - Carry Height |
49 degrees |
- |
- |
Dimensions - Standard Lift |
| Centerline of Rear Axle to Edge of Counterweight |
7.7 ft |
- |
- |
| Centerline of Rear Axle to Hitch |
5.1 ft |
- |
- |
| Ground Clearance |
424 mm |
- |
- |
| Height - Top of Exhaust Pipe |
3531 mm |
- |
- |
| Height - Top of Hood |
2580 mm |
- |
- |
| Height - Top of ROPS |
3593 mm |
- |
- |
| Hinge Pin Height at Carry |
2 ft |
- |
- |
| Hinge Pin Height at Maximum Lift |
4245 mm |
- |
- |
| Lift Arm Clearance at Maximum Lift |
3687 mm |
- |
- |
| Overall Length - Without Bucket |
7399 mm |
- |
- |
| Tread Width |
7.3 ft |
- |
- |
| Wheel Base |
3550 mm |
- |
- |
| Width over Tires (Loaded) |
9.11 ft |
- |
- |
| Rack Back - Carry Height |
50 degrees |
- |
- |
| Rack Back at Ground |
40 degrees |
- |
- |
| Rack Back - Maximum Lift |
62 degrees |
- |
- |
Hydraulic System - Lift/Tilt |
| Lift/Tilt System - Circuit |
- |
EH - Load Sense |
Positive flow control |
| Lift/Tilt System |
- |
2X x 145 cc Variable displacement piston |
Variable displacement piston |
| Maximum Flow at 2,165 rpm |
- |
159 gal/min |
- |
| Relief Valve Setting - Lift/Tilt |
- |
4598 psi |
4786 psi |
| Cylinders, Double Acting - Lift, Bore and Stroke |
- |
190 mm x 1216 mm (7.5 in x 48 in) |
235 mm × 1287 mm (9.3 in × 50.7 in) |
| Cylinders, Double Acting - Tilt, Bore and Stroke |
- |
170 mm x 722 mm (6.7 in x 28.4 in) |
292.1 mm × 820 mm (11.5 in × 32.3 in) |
| Pilot System |
- |
Variable displacement piston |
Open loop and pressure reducing |
| Tilt Cylinder - Stroke |
- |
27 in |
- |
| Maximum Flow at 1,800 rpm (1) |
- |
- |
240 gal/min |
| Relief Valve Setting - Main |
- |
- |
507 psi |
Hydraulic Cycle Times |
| Rack Back |
- |
3.8 s |
4.3 s |
| Raise |
- |
7.5 s |
8.2 s |
| Dump |
- |
3 s |
2.9 s |
| Lower Float Down |
- |
4.6 s |
3.6 s |
| Total Hydraulic Cycle Time - Empty Bucket |
- |
18.9 s |
13.8 s |
| Lower |
- |
- |
3.7 s |
Hydraulic System - Steering |
| Steering System - Circuit |
- |
Pilot, load sensing |
Pilot, load sensing |
| Steering System - Pump |
- |
Piston, variable displacement |
Piston, variable displacement |
| Maximum Flow |
- |
52 gal (US) |
- |
| Relief Valve Setting - Steering |
- |
4000 psi |
5004 psi |
| Total Steering Angle |
- |
70° |
70° |
| Steering Cycle Times - High Idle |
- |
3 s |
- |
| Steering Cycle Times - Low Idle |
- |
5.2 s |
- |
| Maximum Flow at 1,400 rpm |
- |
- |
96.2 gal/min |
Axles |
| Front |
- |
Fixed |
Fixed |
| Rear |
- |
Trunnion |
Trunnion |
| Oscillation Angle |
- |
+/-12.5° |
8.5° |
Brakes |
| Brakes |
- |
ISO 3450:2011 |
ISO 3450: 2011 |
Operator's Cab |
| ROPS/FOPS |
- |
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards |
- |
Sound Performance - Tier 4 Final/EU Stage V - Standard |
| Operator Sound Level (ISO 6396) |
- |
72 dB(A) |
- |
| Machine Sound Level (ISO 6395) |
- |
110 dB(A) |
- |
| Note (1) |
- |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
- |
| Note (2) |
- |
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
- |
| Note (3) |
- |
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
- |
Dimensions (Approximate) - High Lift |
| Ground to Top of ROPS |
- |
13.5 ft |
- |
| Ground to Top of Exhaust Stacks |
- |
13.3 ft |
- |
| Ground to Top of Hood |
- |
10.7 ft |
- |
| Rear Axle - Centerline to Bumper |
- |
10.3 ft |
- |
| Front Axle Centerline to Bucket Tip |
- |
15.7 ft |
- |
| Wheel Base |
- |
12.5 ft |
- |
| Maximum Overall Length |
- |
39.5 ft |
- |
| Ground to Lower Hitch Clearance |
- |
1.5 ft |
- |
| Clearance at Maximum Lift |
- |
12 ft |
- |
| B-Pin Height - Maximum Lift |
- |
18.7 ft |
- |
| Maximum Overall Height - Bucket Raised |
- |
25 ft |
- |
| Reach - Maximum Lift |
- |
7.7 ft |
- |
| Note |
- |
Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires. |
- |
Buckets |
| Bucket Capacities |
- |
6.4-7.6 m3 (8.3-10 yd3) |
8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³) |
Sustainability |
| Recyclability |
- |
96% |
- |
Sound Performance - Standard |
| Operator Sound Level (ISO 6396:2008) |
- |
- |
65.5 dB(A) |
| Machine Sound Level (ISO 6395:2008) |
- |
- |
115 dB(A) |
Sound Performance - Suppression |
| Operator Sound Level (ISO 6396:2008) |
- |
- |
65.5 dB(A) |
| Machine Sound Level (ISO 6395:2008) |
- |
- |
113 dB(A) |
