Compare Equipment Go Back

966 XE
995 Wheel Loader
986 Wheel Loader

Engine

Engine Power @ 1,600 rpm - ISO 14396:2002 321 HP - -
Gross Power @ 1,600 rpm - SAE J1995:2014 325 HP - -
Engine Model Cat C9.3B Cat® 3516E C15 Cat®
Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011 298 HP - -
Note (1) Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. The power ratings apply when tested under the reference conditions for the specified standard. -
Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. -
Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011 1226 HP - -
Note (3) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h The gross power advertised is with the fan at maximum speed. -
Gross Torque @ 1,200 rpm – SAE J1995:2014 1327 lb/ft - -
Engine Torque @ 1,200 rpm – ISO 14396:2002 1313 lb/ft - -
Displacement 9.3 L 4766 in³ 927 in²
Emissions - U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA
Engine Power - ISO 14396 - 1847 HP 449 HP
Gross Power - SAE J1995 - 1870 HP -
Net Power - SAE J1349 - Standard Ambient - 1739 HP -
Net Power - SAE J1349 - High Ambient - 1696 HP -
Bore - 6.7 in 5.4 in
Stroke - 8.5 in 6.75 in
Peak Torque - 1,200 rpm - SAE J1995 - 8549 lb/ft 1778 lb/ft
Torque Rise - 39% 16%
Peak Power Speed - - 1600
Peak Power Speed - Gross - SAE J1995 - - 456 HP
Net Power - SAE J1349 - - 373 HP
Rated Speed - - 2000
Rated Speed - 2,000 rpm - EEC 80/1269 - - 373 HP
Rated Speed - 2,000 rpm - EEC 80/1269 (DIN) - - 378 HP
Rated Speed - 2,000 rpm - ISO 9249 - - 373 HP
Rated Speed - 2,000 rpm - ISO 9249 (DIN) - - 378 HP

Weights

Operating Weight 51124 lb - -
Note Weight based on a machine configuration with Bridgestone 26.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, front manual differential/open rear axles, power train guard, sec - -

Bucket Capacities

Bucket Range 2.8-11.9 m³ 3.75-15.5 yd³ - -

Transmission

Forward - 1 4.3 mile/h 4.6 mile/h 5 mile/h
Forward - 2 8 mile/h 8 mile/h 8 mile/h
Forward - 3 14.1 mile/h 13.6 mile/h -
Forward - 4 24.5 mile/h - -
Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius. Travel speeds based on 58/85-57 tires. -
Reverse - 1 4.3 mile/h 5 mile/h 5 mile/h
Reverse - 2 8 mile/h 8.8 mile/h 8 mile/h
Reverse - 3 17.9 mile/h 14.9 mile/h -
Transmission Type - Cat Planetary Power Shift Cat planetary power shift
Direct Drive - Forward 1 - Lock-up disables -
Direct Drive - Forward 2 - 8.7 mile/h 8 mile/h
Direct Drive - Forward 3 - 15.2 mile/h 14 mile/h
Direct Drive - Reverse 1 - Lock-up disables -
Direct Drive - Reverse 2 - 9.6 mile/h 9 mile/h
Direct Drive - Reverse 3 - 16.8 mile/h 16 mile/h
Direct Drive - Forward 4 - - 24 mile/h
Direct Drive - Reverse 4 - - 25.4 mile/h

Sound

Note (1) ** For machines in European Union countries and in countries that adopt the EU Directives. - -
Note (2) ***European Union Directive 2000/14/EC as amended by 2005/88/EC. - -
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* 105 - -
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 67 dB(A) - -
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) 107 dB(A) - -
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) 74 - -
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) 67 dB(A) - -
With Cooling Fan Speed at Maximum Value - Note Distance of 15 m (49.2 ft), moving forward in second gear ratio. - -

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons). - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

Operating Specifications

Breakout Force 38999 lb - -
Note (1) For a machine configuration as defined under �Weight.� - -
Note (2) Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. - -
Static Tipping Load - Full 40° Turn - No Tire Deflection 15981 kg - -
Static Tipping Load - Full 40° Turn - With Tire Deflection 32727 lb - -
Operating Weight - Standard - 543772 lb 97785 lb
Bucket Capacity Range - 17.2-43.6 m3 (22.3-57 yd3) 5-10,3 m³ (6,5-13,5 yd.³)
Operating Weight - High Lift - 547675 lb 104005 lb
Rated Payload - Standard Lift (Low to Moderate Digging Resistance) - 60 ton (US) -
Rated Payload - Standard Lift (Moderate to High Digging Resistance) - 50 ton (US) -
Rated Payload - High Lift (Low to Moderate Digging Resistance) - 55 ton (US) -
Rated Payload - High Lift (Moderate to High Digging Resistance) - 50 ton (US) -
Note - *Please contact your local dealer to determine if your application is suitable for this increased rated payload. -
Cat Truck Match - Standard - 785/789 770/735/740/745
Cat Truck Match - High Lift - 789/793/794 772/773
Rated Payload - Standard (Quarry Face) - - 11 ton (US)
Rated Payload - Loose Material (Standard) - - 14 ton (US)
Rated Payload - High Lift (Quarry Face) - - 11 ton (US)
Rated Payload - Loose Material (High Lift) - - 12.1 ton (US)

Service Refill Capacities

Cooling System 17.4 gal (US) - -
Crankcase 6.1 gal (US) - 9 gal (US)
DEF Tank 6.9 gal (US) - -
Differential - Final Drives - Front 15.1 gal (US) - -
Differential - Final Drives - Rear 15.1 gal (US) - -
Fuel Tank 80.1 gal (US) - 141 gal (US)
Hydraulic Tank 30.1 gal (US) - -
Transmission 16.6 gal (US) - 20 gal (US)
Fuel Tank - Short Lift - - 127 gal (US)
Cooling Systems - - 26 gal (US)
Diesel Exhaust Fluid Tank - - 6 gal (US)
Axle Oil - Differentials and Final Drives - Front - - 49 gal (US)
Axle Oil - Differentials and Final Drives - Rear - - 45 gal (US)
Hydraulic System Factory Fill - - 87 gal (US)
Hydraulic System - Tank Only - - 34 gal (US)

Hydraulic System

Implement System - Maximum Operating Pressure 4496 psi - -
Implement System - Maximum Pump Output at 2,250 rpm 92 gal/min - -
Hydraulic Cycle Time - Total 10.1 seconds - -

Dimensions

Note All dimensions are approximate and based on machine equipped with 4.2 m3 (5.5 yd3) general purpose bucket with BOCE and Bridgestone 26.5R25 VJT L3 radial tires. - -

Dimensions - High Lift

Centerline of Rear Axle to Edge of Counterweight 8.1 ft - -
Centerline of Rear Axle to Hitch 5.1 ft - -
Ground Clearance 1.4 ft - -
Height - Top of Exhaust Pipe 11.8 ft - -
Height - Top of Hood 9.5 ft - -
Height - Top of ROPS 11.1 ft - -
Hinge Pin Height at Carry 2.6 ft - -
Hinge Pin Height at Maximum Lift 15.9 ft - -
Lift Arm Clearance at Maximum Lift 13.8 ft - -
Overall Length - Without Bucket 26.6 ft - -
Tread Width 7.3 ft - -
Wheel Base 11.8 ft - -
Rack Back at Ground 37 degrees - -
Width over Tires (Loaded) 9.11 ft - -
Rack Back - Maximum Lift 71 degrees - -
Rack Back - Carry Height 49 degrees - -

Dimensions - Standard Lift

Centerline of Rear Axle to Edge of Counterweight 7.7 ft - -
Centerline of Rear Axle to Hitch 5.1 ft - -
Ground Clearance 424 mm - -
Height - Top of Exhaust Pipe 3531 mm - -
Height - Top of Hood 2580 mm - -
Height - Top of ROPS 3593 mm - -
Hinge Pin Height at Carry 2 ft - -
Hinge Pin Height at Maximum Lift 4245 mm - -
Lift Arm Clearance at Maximum Lift 3687 mm - -
Overall Length - Without Bucket 7399 mm - -
Tread Width 7.3 ft - -
Wheel Base 3550 mm - -
Width over Tires (Loaded) 9.11 ft - -
Rack Back - Carry Height 50 degrees - -
Rack Back at Ground 40 degrees - -
Rack Back - Maximum Lift 62 degrees - -

Complete System Fill

Fuel Tank - Standard - 856 gal (US) -
Fuel Tank - With 24 hr Attachment - 1414 gal (US) -
Cooling System - 138 gal (US) -
Engine Crankcase - 76 gal (US) -
Transmission - 110 gal (US) -
Differential - Final Drives - Front - 220 gal (US) -
Differential - Final Drives - Rear - 200 gal (US) -
Hydraulic Tank - Implement and Hydraulic Fan - 270 gal (US) -
Hydraulic Tank - Steering and Braking - 100 gal (US) -
Oil Renewal System (ORS)* - 20 gal (US) -
Note - *Not available on Tier 4 Final/Stage V machines. Not available in all regions. -

Axles

Front - Fixed Fixed
Rear - Trunnion Trunnion
Oscillation Angle - ±12.5°
Oscillation Angle - Chain Arrangement - - ±8.5°

Cooling System

Ambient Capability Hydraulically Driven Demand Fan - Standard - 109.4 °F -
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) - 131 °F -
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) - 127.4 °F -

Sound Performance - Standard

Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - 74 dB(A) -
Machine Sound Level (ISO 6395:2008) - 119 dB(A) -
Note - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
  • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
  • Hearing protection may be neede
Operator Sound Level (ISO 6396) - - 72 dB(A)
Machine Sound Level (ISO 6395) - - 112 dB(A)

Sound Performance - Suppression

Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - 73 dB(A) -
Machine Sound Level (ISO 6395:2008) - 117 dB(A) -
Note - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
  • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
  • Hearing protection may be neede
Operator Sound Level (ISO 6396) - - 72 dB(A)
Machine Sound Level (ISO 6395) - - 110 dB(A)

Hydraulic System - Steering

Steering System - Circuit - Pilot, Load Sensing Load Sense
Steering System - Pump - Piston, Variable Displacement Piston, variable displacement
Total Steering Angle - 80 degrees 70°
Steering Cycle Times - Low Idle - 7.6 s -
Steering Cycle Times - High Idle - 4.3 s -
Maximum Flow at 1,400 rpm - - 52 gal/min
Steering Cut Off Pressure - - 4000 psi

Dimensions - Standard Lift - Approximate

B-Pin Height - Maximum Lift - 28.8 ft -
Clearance at Maximum Lift - 19.8 ft -
Dump Angle at Maximum Lift - –50.0 degrees -
Front Axle Centerline to Bucket Tip - 21.9 ft -
Ground to Bumper Clearance - 4.4 ft -
Ground to Center of Axles - 6 ft -
Ground to Lower Hitch Clearance - 2.9 ft -
Ground to Top of Exhaust Stacks - 23.2 ft -
Ground to Top of Hood - 18.6 ft -
Ground to Top of ROPS - 23.4 ft -
Maximum Overall Height - Bucket Raised - 39.3 ft -
Maximum Overall Length - 64.6 ft -
Note - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. -
Rack Angle at Maximum Lift - 59.5 degrees -
Rack Back Angle - Carry - 47.7 degrees -
Rack Back Angle - Ground Level - 39.7 degrees -
Reach - Maximum Lift - 9.6 ft -
Rear Axle - Centerline to Bumper - 20.4 ft -
Tread Width - 14.1 ft -
Wheel Base - 22.3 ft -
Width - Over Tires - With Bulge - 18.8 ft -

Dimensions - High Lift - Approximate

B-Pin Height - Maximum Lift - 31.6 ft -
Clearance at Maximum Lift - 22.6 ft -
Dump Angle at Maximum Lift - –50.0 degrees -
Front Axle Centerline to Bucket Tip - 24.2 ft -
Ground to Bumper Clearance - 4.4 ft -
Ground to Center of Axles - 6 ft -
Ground to Lower Hitch Clearance - 2.9 ft -
Ground to Top of Exhaust Stacks - 23.2 ft -
Ground to Top of Hood - 18.6 ft -
Ground to Top of ROPS - 23.4 ft -
Maximum Overall Height - Bucket Raised - 42.1 ft -
Maximum Overall Length - 66.9 ft -
Note - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. -
Rack Angle at Maximum Lift - 59.4 degrees -
Rack Back Angle - Carry - 53.5 degrees -
Rack Back Angle - Ground Level - 45 degrees -
Reach - Maximum Lift - 9.4 ft -
Rear Axle - Centerline to Bumper - 20.4 ft -
Tread Width - 14.1 ft -
Wheel Base - 22.3 ft -
Width - Over Tires - With Bulge - 18.8 ft -

Hydraulic System - Lift/Tilt

Lift/Tilt System - Circuit - Positive Flow Control Load Sense
Lift/Tilt System - Pump - Variable Displacement Piston 2 × 110 cc variable displacement
Maximum Flow at 1,700 rpm Engine Speed - 541 gal/min -
Relief Valve Setting - Lift/Tilt - 5004 psi 4050 psi
Cylinders, Double Acting - Lift, Bore and Stroke - 370 × 1713 mm (14.6 × 67.4 in) -
Cylinders, Double Acting - Tilt, Bore and Stroke - 310 × 1086 mm (12.2 × 42.8 in) -
Pilot System - Open Loop and Pressure Reducing -
Maximum Flow at 2,165 rpm - - 123 gal/min
Lift Cylinder - Bore - - 7.5 in
Lift Cylinder - Stroke - - 45 in
Tilt Cylinder - Bore - - 6.7 in
Tilt Cylinder - Stroke - - 28.4 in

Hydraulic Cycle Times

Rack Back - 4.9 s 4.5 s
Raise - 12.6 s 9 s
Dump - 3.1 s 3.5 s
Lower Float Down - 4.2 s 4.3 s
Lower - - 5.2 s
Total Hydraulic Cycle Time - - 21.3 s

Brakes

Brakes - ISO 3450:2011 ISO 3450:2011

Operator's Cab

ROPS/FOPS - - ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)

Dimensions (Approximate) - Standard Lift Linkage

Ground to Top of ROPS - - 13.5 ft
Ground to Top of Exhaust Stacks - - 13.3 ft
Ground to Top of Hood - - 10.7 ft
Ground to Center of Front Axle - - 3.2 ft
Ground to Fuel Tank Clearance - - 2.3 ft
Ground to Lower Hitch Clearance - - 1.5 ft
Reach - Maximum Lift - - 7.1 ft
Clearance at Maximum Lift - - 10.1 ft
B-Pin Height - Maximum Lift - - 16.1 ft
Maximum Overall Height - Bucket Raised - - 22.4 ft
Rear Axle - Centerline to Bumper - - 10.3 ft
Wheel Base - - 12.5 ft
Maximum Overall Length - - 36.6 ft
Front Axle Centerline to Bucket Tip - - 13.8 ft
Note - -
  • All dimensions are approximate.
  • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.

Dimensions (Approximate) - High Lift Linkage

Ground to Top of ROPS - - 13.5 ft
Ground to Top of Exhaust Stacks - - 13.3 ft
Ground to Top of Hood - - 10.7 ft
Ground to Center of Front Axle - - 3.2 ft
Ground to Fuel Tank Clearance - - 2.3 ft
Ground to Lower Hitch Clearance - - 1.5 ft
Reach - Maximum Lift - - 7.4 ft
Clearance at Maximum Lift - - 11.6 ft
B-Pin Height - Maximum Lift - - 17.6 ft
Maximum Overall Height - Bucket Raised - - 23.9 ft
Rear Axle - Centerline to Bumper - - 10.3 ft
Wheel Base - - 12.5 ft
Maximum Overall Length - - 38 ft
Front Axle Centerline to Bucket Tip - - 15.3 ft
Note - -
  • All dimensions are approximate.
  • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.

Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket

Ground to Top of ROPS - - 13.5 ft
Ground to Top of Exhaust Stacks - - 13.3 ft
Ground to Top of Hood - - 10.7 ft
Ground to Center of Rear Axle - - 3.2 ft
Ground to Fuel Tank Clearance - - 2.3 ft
Ground to Lower Hitch Clearance - - 1.5 ft
Reach at Maximum Lift - - 8 ft
Clearance at Maximum Lift - - 10.7 ft
B-Pin Height at Maximum Lift - - 15 ft
Maximum Overall Height, Bucket Raised - - 20.9 ft
Rear Axle Center Line to Bumper - - 10.3 ft
Wheel Base - - 12.5 ft
Maximum Overall Length - - 35 ft
Front Axle Centerline to Bucket Tip - - 12.2 ft

Dimensions (Approximate) - Quick Coupler and Fork

Ground to Top of ROPS - - 13.5 ft
Ground to Top of Exhaust Stacks - - 13.3 ft
Ground to Top of Hood - - 10.7 ft
Ground to Center of Rear Axle - - 3.2 ft
Ground to Fuel Tank Clearance - - 2.3 ft
Ground to Lower Hitch Clearance - - 1.5 ft
B-Pin Height at Maximum Lift - - 15 ft
Rear Axle Center Line to Bumper - - 10.3 ft
Wheel Base - - 12.5 ft
Maximum Overall Length - - 35.4 ft
Front Axle Centerline to Bucket Tip - - 12.6 ft
Add a Similar Product: