Compare Equipment Go Back

990 Wheel Loader
992 Wheel Loader

Engine

Engine Model C27 Cat® Cat® C32B -
Rated Speed 1,800/min 1750 rpm -
Engine Power - ISO 14396:2002 752 hp - -
Gross Power - SAE J1995:2014 766 hp - -
Net Power - SAE J1349 - Standard Ambient 699 hp - -
Net Power - SAE J1349 - High Ambient 648 hp - -
Bore 5.4 in 5.7 in -
Stroke 6 in 6.4 in -
Displacement 1649.5 in³ 1963.5 in³ -
Peak Torque - 1,200 rpm 2624 lb/ft - -
Torque Rise 18 % - -
Emissions U.S. EPA TIer 4 Final and EU Stage V emission standards or U.S. EPA Tier 2 and EU Stage II equivalent U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent -
Net Power - 814 hp -
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard - 900 hp -
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient - 937 hp -
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard - 907 hp -
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient - 944 hp -
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard - 884 hp -
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient - 921 hp -
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard - 893 hp -
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient - 931 hp -
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard - 814 hp -
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient - 814 hp -
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard - 823 hp -
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient - 823 hp -
Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm - 3514 ft·lbf -
Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm - 3555 ft·lbf -
Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm - 3537 ft·lbf -
Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm - 3570 ft·lbf -

Transmission

Transmission Type Cat planetary power shift Cat Planetary Powershift -
Forward - 1 4.5 mile/h 4.3 mile/h -
Forward - 2 8.3 mile/h 7.4 mile/h -
Forward - 3 14.2 mile/h 12.7 mile/h -
Reverse - 1 4.9 mile/h 4.7 mile/h -
Reverse - 2 9.1 mile/h 8.1 mile/h -
Reverse - 3 15.5 mile/h 13.9 mile/h -
Direct Drive - Forward 1 Lock-up disabled Disabled -
Direct Drive - Forward 2 8.5 mile/h 8 mile/h -
Direct Drive - Forward 3 15.2 mile/h 14 mile/h -
Direct Drive - Reverse 1 5.4 mile/h 5 mile/h -
Direct Drive - Reverse 2 9.6 mile/h 8.8 mile/h -
Direct Drive - Reverse 3 16.4 mile/h 15.3 mile/h -
Note Travel speeds based on Michelin 45/65R39 LD D2**L5 tires. - -

Operating Specifications

Operating Weight 178517 lb 233430 lb -
Rated Payload - Standard 17.5 ton (US) 25.5 ton (US) -
Rated Payload - High Lift 17.5 ton (US) 22.5 ton (US) -
Bucket Capacity Range 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³) 11.5-24.5 m³ (15-32 yd³) -
Cat Truck Match - Standard 773-775 775/777 -
Cat Truck Match - High Lift 775-777 785 -
Rated Payload - Standard (Material Handler) - 30 ton (US) -
Rated Payload - High Lift (Material Handler) - 27 ton (US) -

Hydraulic System - Lift/Tilt

Lift/Tilt System - Circuit Positive flow control Positive Flow Control -
Lift/Tilt System Variable displacement piston - -
Maximum Flow at 1,800 rpm (1) 240 gal/min - -
Cylinders, Double Acting - Lift, Bore and Stroke 235 mm × 1287 mm (9.3 in × 50.7 in) - -
Cylinders, Double Acting - Tilt, Bore and Stroke 292.1 mm × 820 mm (11.5 in × 32.3 in) - -
Pilot System Open loop and pressure reducing - -
Relief Valve Setting - Main 507 psi - -
Relief Valve Setting - Lift/Tilt 4786 psi 5000 psi -
Lift/Tilt System - Pump - Variable Displacement Piston -
Maximum Flow at 2,165 rpm - 250 gal/min -
Lift Cylinder - Bore - 9.3 in -
Lift Cylinder - Stroke - 63.5 in -
Tilt Cylinder - Bore - 11.5 in -
Tilt Cylinder - Stroke - 41.5 in -

Hydraulic Cycle Times

Rack Back 4.3 s 2.3 s -
Raise 8.2 s 9 s -
Dump 2.9 s 2.6 s -
Lower 3.7 s - -
Lower Float Down 3.6 s - -
Total Hydraulic Cycle Time - Empty Bucket 13.8 s - -
Rack Back - High Lift - 2.3 s -
Raise - High Lift - 9 s -
Dump - High Lift - 2.6 s -
Float Down - 3.2 s -
Float Down - High Lift - 3.2 s -
Total Hydraulic Cycle Time - 17.1 s -

Hydraulic System - Steering

Steering System - Circuit Pilot, load sensing Pilot, Load Sensing -
Steering System - Pump Piston, variable displacement Piston, Variable Displacement -
Maximum Flow at 1,400 rpm 96.2 gal/min - -
Relief Valve Setting - Steering 5004 psi - -
Total Steering Angle 70° 80° -
Maximum Flow at 1,400-1,850 rpm - 70 gal/min -
Steering Cut Off Pressure - 4500 psi -
Steering Cycle Times - Low Idle - 4.9 s -
Steering Cycle Times - High Idle - 3.1 s -

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.7 kg of refrigerant which has a CO2 equivalent of 3.861 metric tonnes (4.256 tons). - -

Axles

Front Fixed Fixed -
Rear Trunnion Trunnion -
Oscillation Angle 8.5° ±9° -

Brakes

Brakes ISO 3450: 2011 ISO 3450:2011 -

Service Refill Capacities

Fuel Tank 294.3 gal (US) 385.7 gal (US) -
Cooling System 54.9 gal (US) - -
Engine Crankcase 20 gal (US) - -
Transmission 29.1 gal (US) 51.5 gal (US) -
Differential - Final Drives - Front 71.6 gal (US) 96.4 gal (US) -
Differential - Final Drives - Rear 68.9 gal (US) 96.4 gal (US) -
Hydraulic System Factory Fill 210 gal (US) - -
Hydraulic Tank - Implement and Hydraulic Fan 68.9 gal (US) - -
Hydraulic Tank - Steering and Braking 34.9 gal (US) - -
Note All nonroad U.S. EPA Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or l - -
Cooling Systems - 59.4 gal (US) -
Crankcase - 31.7 gal (US) -
Hydraulic System Factory Fill (Implement) - 104.1 gal (US) -
Hydraulic Tank - Implement - 60.2 gal (US) -
Hydraulic Factory Fill (Steering) - 32.5 gal (US) -
Hydraulic Tank (Steering Tank Only) - 26.3 gal (US) -

Sound Performance - Standard

Operator Sound Level (ISO 6396:2008) 65.5 dB(A) - -
Machine Sound Level (ISO 6395:2008) 115 dB(A) - -
Note - Machine Sound Level (ISO 6396:2008) - 116 dB(A) -

Sound Performance - Suppression

Operator Sound Level (ISO 6396:2008) 65.5 dB(A) - -
Machine Sound Level (ISO 6395:2008) 113 dB(A) - -
Note - Machine Sound Level (ISO 6396:2008) - 113 dB(A) -

Buckets

Bucket Capacities 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³) 11.5-24.5 m³ (15-32 yd³) -

Cooling System

Ambient Capability Hydraulically Driven Demand Fan - Standard - 109.4 °F -
Ambient Capability, Hydraulically Driven Demand Fan - High - 131 °F -

Dimensions - Standard Lift - Approximate

Ground to Top of Exhaust Stacks - 17 ft -
Ground to Top of ROPS - 18.3 ft -
Ground to Top of Hood - 13.1 ft -
Ground to Center of Front Axle - 4.3 ft -
Ground to Bumper Clearance - 3.8 ft -
Ground to Lower Hitch Clearance - 2.2 ft -
Reach - Maximum Lift - 8.2 ft -
Clearance at Maximum Lift - 15.2 ft -
B-Pin Height - Maximum Lift - 22.8 ft -
Maximum Overall Height - Bucket Raised - 30.8 ft -
Rear Axle - Centerline to Bumper - 13.5 ft -
Tread Width - 10.83 ft -
Rack Back Angle - Maximum Lift - 56.9 degrees -
Dump Angle at Maximum Lift - -49.5 degrees -
Rack Back Angle - Ground Level - 40.2 degrees -
Width - Over Tires - With Bulge - 14.74 ft -
Rack Back Angle - Carry - 48.9 degrees -
Wheel Base - 19.3 ft -
Maximum Overall Length - 50.8 ft -
Front Axle Centerline to Bucket Tip - 18 ft -

Dimensions - High Lift - Approximate

Tread Width - 10.83 ft -
Rack Back Angle - Ground Level - 42.5 degrees -
Dump Angle at Maximum Lift - -48.1 degrees -
Rack Back Angle - Maximum Lift - 56.2 degrees -
Width - Over Tires - With Bulge - 14.75 ft -
Rack Back Angle - Carry - 51.6 degrees -
Ground to Top of Exhaust Stacks - 17 ft -
Ground to Top of ROPS - 18.3 ft -
Ground to Top of Hood - 13.1 ft -
Ground to Center of Front Axle - 4.3 ft -
Ground to Bumper Clearance - 3.8 ft -
Ground to Lower Hitch Clearance - 2.2 ft -
Reach - Maximum Lift - 7.6 ft -
Clearance at Maximum Lift - 17.2 ft -
B-Pin Height - Maximum Lift - 24.5 ft -
Maximum Overall Height - Bucket Raised - 32 ft -
Rear Axle - Centerline to Bumper - 13.5 ft -
Wheel Base - 19.3 ft -
Maximum Overall Length - 51.6 ft -
Front Axle Centerline to Bucket Tip - 18.8 ft -
Add a Similar Product:
  • 995 Wheel Loader Add
  • 988 GC Wheel Loader Add
  • 988 XE Wheel Loader Add
  • 986 Wheel Loader Add
  • 988 Wheel Loader Add
  • 938M Waste Handler Small Wheel Loader Add
  • 950 GC Wheel Loader | Front Loader Add
  • 938M Small Wheel Loader Add
  • 938M Aggregate Handler Small Wheel Loader Add
  • 930M Waste Handler Small Wheel Loader Add