CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    986 Wheel Loader
    View Product
    988 XE Wheel Loader
    View Product Remove
    995 Wheel Loader
    View Product Remove

    Engine
    Engine Model C15 Cat® Cat® C18 ™ Cat® 3516E
    Peak Power Speed 1600 1,500 rpm -
    Peak Power Speed - Gross - SAE J1995 456 hp - -
    Engine Power - ISO 14396:2002 449 hp 580 hp 1847 hp
    Net Power - SAE J1349:2011 373 hp 538 hp -
    Rated Speed 2000 1,700 rpm -
    Rated Speed - 2,000 rpm - EEC 80/1269 373 hp - -
    Rated Speed - 2,000 rpm - EEC 80/1269 (DIN) 378 hp - -
    Rated Speed - 2,000 rpm - ISO 9249 373 hp - -
    Rated Speed - 2,000 rpm - ISO 9249 (DIN) 378 hp - -
    Bore 5.4 in 5.7 in 6.7 in
    Stroke 6.75 in 7.2 in 8.5 in
    Displacement 927 in² 1105 in³ 4766 in³
    Peak Torque - 1,200 rpm - SAE J1995 1778 lb/ft 2230 ft·lbf 8549 lb/ft
    Torque Rise 16% 58% 39%
    Emissions U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent
    Gross Power - SAE J1995:2014 - 588 hp 1870 hp
    Net Power - SAE J1349 - Standard Ambient - - 1739 hp
    Net Power - SAE J1349 - High Ambient - - 1696 hp
    Note (1) - - The power ratings apply when tested under the reference conditions for the specified standard.
    Note (2) - - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.
    Note (3) - - The gross power advertised is with the fan at maximum speed.

    Transmission
    Transmission Type Cat planetary power shift Cat switched reluctance electric drive Cat Planetary Power Shift
    Forward - 1 5 mile/h - 4.6 mile/h
    Forward - 2 8 mile/h - 8 mile/h
    Direct Drive - Forward 2 8 mile/h - 8.7 mile/h
    Direct Drive - Forward 3 14 mile/h - 15.2 mile/h
    Direct Drive - Forward 4 24 mile/h - -
    Reverse - 1 5 mile/h - 5 mile/h
    Reverse - 2 8 mile/h - 8.8 mile/h
    Direct Drive - Reverse 2 9 mile/h - 9.6 mile/h
    Direct Drive - Reverse 3 16 mile/h - 16.8 mile/h
    Direct Drive - Reverse 4 25.4 mile/h - -
    Forward 1 (virtual) - 4.3 mile/h -
    Forward 2 (virtual) - 7 mile/h -
    Forward 3 (virtual) - 13.8 mile/h -
    Forward 4 (virtual) - 20 mile/h -
    Reverse 1 (virtual) - 4.3 mile/h -
    Reverse 2 (virtual) - 7 mile/h -
    Reverse 3 (virtual) - 17.5 mile/h -
    Forward - 3 - - 13.6 mile/h
    Reverse - 3 - - 14.9 mile/h
    Direct Drive - Forward 1 - - Lock-up disables
    Direct Drive - Reverse 1 - - Lock-up disables
    Note - - Travel speeds based on 58/85-57 tires.

    Operating Specifications
    Operating Weight - Standard 97785 lb 116362 lb 543772 lb
    Operating Weight - High Lift 104005 lb 119618 lb 547675 lb
    Rated Payload - Standard (Quarry Face) 11 ton (US) 12.5 ton (US) -
    Rated Payload - Loose Material (Standard) 14 ton (US) 16 ton (US) -
    Rated Payload - High Lift (Quarry Face) 11 ton (US) - -
    Rated Payload - Loose Material (High Lift) 12.1 ton (US) - -
    Bucket Capacity Range 5-10,3 m³ (6,5-13,5 yd.³) 4.7-13 m3 (6.2-17 yd3) 17.2-43.6 m3 (22.3-57 yd3)
    Cat Truck Match - Standard 770/735/740/745 - 785/789
    Cat Truck Match - High Lift 772/773 - 789/793/794
    Operating Weight - 116362 lb -
    Rated Payload - Standard Lift (Low to Moderate Digging Resistance) - - 60 ton (US)
    Rated Payload - Standard Lift (Moderate to High Digging Resistance) - - 50 ton (US)
    Rated Payload - High Lift (Low to Moderate Digging Resistance) - - 55 ton (US)
    Rated Payload - High Lift (Moderate to High Digging Resistance) - - 50 ton (US)
    Note - - *Please contact your local dealer to determine if your application is suitable for this increased rated payload.

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit Load Sense EH-Positive Flow Control, Flow Sharing Positive Flow Control
    Lift/Tilt System - Pump 2 × 110 cc variable displacement Variable displacement piston Variable Displacement Piston
    Maximum Flow at 2,165 rpm 123 gal/min - -
    Relief Valve Setting - Lift/Tilt 4050 psi 4757 psi 5004 psi
    Lift Cylinder - Bore 7.5 in 8.7 in -
    Lift Cylinder - Stroke 45 in 41.3 in -
    Tilt Cylinder - Bore 6.7 in 8.7 in -
    Tilt Cylinder - Stroke 28.4 in 27 in -
    Maximum Flow at 1,400-1,600 rpm - 153 gal/min -
    Maximum Flow at 1,700 rpm Engine Speed - - 541 gal/min
    Cylinders, Double Acting - Lift, Bore and Stroke - - 370 × 1713 mm (14.6 × 67.4 in)
    Cylinders, Double Acting - Tilt, Bore and Stroke - - 310 × 1086 mm (12.2 × 42.8 in)
    Pilot System - - Open Loop and Pressure Reducing

    Hydraulic Cycle Times
    Rack Back 4.5 s 4.5 s 4.9 s
    Raise 9 s 8 s 12.6 s
    Dump 3.5 s 2.2 s 3.1 s
    Lower 5.2 s - -
    Lower Float Down 4.3 s 3.5 s 4.2 s
    Total Hydraulic Cycle Time 21.3 s 18.2 s -

    Hydraulic System - Steering
    Steering System - Circuit Load Sense Pilot, load sensing Pilot, Load Sensing
    Steering System - Pump Piston, variable displacement Piston, variable displacement Piston, Variable Displacement
    Maximum Flow at 1,400 rpm 52 gal/min - -
    Steering Cut Off Pressure 4000 psi 4351 psi -
    Total Steering Angle 70° 86° 80 degrees
    Maximum Flow at 1,400-1,600 rpm - 71.3 gal/min -
    Steering Cycle Times - High Idle - 3.4 s 4.3 s
    Steering Cycle Times - Low Idle - 5.6 s 7.6 s

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. -

    Axles
    Front Fixed Fixed Fixed
    Rear Trunnion Trunnion Trunnion
    Oscillation Angle ±12.5° 13° 9°
    Oscillation Angle - Chain Arrangement ±8.5° - -

    Brakes
    Brakes ISO 3450:2011 ISO 3450:2011 ISO 3450:2011

    Service Refill Capacities
    Fuel Tank 141 gal (US) 147 gal (US) -
    Fuel Tank - Short Lift 127 gal (US) - -
    Cooling Systems 26 gal (US) - -
    Crankcase 9 gal (US) - -
    Diesel Exhaust Fluid Tank 6 gal (US) 8.7 gal (US) -
    Transmission 20 gal (US) 16 gal (US) -
    Axle Oil - Differentials and Final Drives - Front 49 gal (US) - -
    Axle Oil - Differentials and Final Drives - Rear 45 gal (US) - -
    Hydraulic System Factory Fill 87 gal (US) - -
    Hydraulic System - Tank Only 34 gal (US) - -
    Cooling System - Jacket Water - 30 gal (US) -
    Cooling Systems - Power Train - 8 gal (US) -
    Engine Crankcase - 16 gal (US) -
    Differential - Final Drives - Front - 49 gal (US) -
    Differential - Final Drives - Rear - 49 gal (US) -
    Hydraulic System - Implement/Steering - 126 gal (US) -
    Note - All nonroad Tier 4 Final/Stage V diesel engines are required to use: – The machine has the flexibility to run on either ultra-low-sulfur diesel fuel (ULSD with 15 ppm of sulfur or less). – Cat engines are compatible with the following renewable, alternati -

    Operator's Cab
    ROPS/FOPS ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS) ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards -

    Sound Performance - Standard
    Operator Sound Level (ISO 6396) 72 dB(A) - -
    Machine Sound Level (ISO 6395) 112 dB(A) - -
    Note
    • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
    • Hearing protection may be neede
    		- The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - - 74 dB(A)
    Machine Sound Level (ISO 6395:2008) - - 119 dB(A)

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396) 72 dB(A) - -
    Machine Sound Level (ISO 6395) 110 dB(A) - -
    Note
    • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
    • Hearing protection may be neede
    		- The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - - 73 dB(A)
    Machine Sound Level (ISO 6395:2008) - - 117 dB(A)

    Dimensions (Approximate) - Standard Lift Linkage
    Ground to Top of ROPS 13.5 ft - -
    Ground to Top of Exhaust Stacks 13.3 ft - -
    Ground to Top of Hood 10.7 ft - -
    Ground to Center of Front Axle 3.2 ft - -
    Ground to Fuel Tank Clearance 2.3 ft - -
    Ground to Lower Hitch Clearance 1.5 ft - -
    Reach - Maximum Lift 7.1 ft - -
    Clearance at Maximum Lift 10.1 ft - -
    B-Pin Height - Maximum Lift 16.1 ft - -
    Maximum Overall Height - Bucket Raised 22.4 ft - -
    Rear Axle - Centerline to Bumper 10.3 ft - -
    Wheel Base 12.5 ft - -
    Maximum Overall Length 36.6 ft - -
    Front Axle Centerline to Bucket Tip 13.8 ft - -
    Note
    • All dimensions are approximate.
    • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
    		 - -

    Dimensions (Approximate) - High Lift Linkage
    Ground to Top of ROPS 13.5 ft - -
    Ground to Top of Exhaust Stacks 13.3 ft - -
    Ground to Top of Hood 10.7 ft - -
    Ground to Center of Front Axle 3.2 ft - -
    Ground to Fuel Tank Clearance 2.3 ft - -
    Ground to Lower Hitch Clearance 1.5 ft - -
    Reach - Maximum Lift 7.4 ft - -
    Clearance at Maximum Lift 11.6 ft - -
    B-Pin Height - Maximum Lift 17.6 ft - -
    Maximum Overall Height - Bucket Raised 23.9 ft - -
    Rear Axle - Centerline to Bumper 10.3 ft - -
    Wheel Base 12.5 ft - -
    Maximum Overall Length 38 ft - -
    Front Axle Centerline to Bucket Tip 15.3 ft - -
    Note
    • All dimensions are approximate.
    • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
    		 - -

    Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
    Ground to Top of ROPS 13.5 ft - -
    Ground to Top of Exhaust Stacks 13.3 ft - -
    Ground to Top of Hood 10.7 ft - -
    Ground to Center of Rear Axle 3.2 ft - -
    Ground to Fuel Tank Clearance 2.3 ft - -
    Ground to Lower Hitch Clearance 1.5 ft - -
    Reach at Maximum Lift 8 ft - -
    Clearance at Maximum Lift 10.7 ft - -
    B-Pin Height at Maximum Lift 15 ft - -
    Maximum Overall Height, Bucket Raised 20.9 ft - -
    Rear Axle Center Line to Bumper 10.3 ft - -
    Wheel Base 12.5 ft - -
    Maximum Overall Length 35 ft - -
    Front Axle Centerline to Bucket Tip 12.2 ft - -

    Dimensions (Approximate) - Quick Coupler and Fork
    Ground to Top of ROPS 13.5 ft - -
    Ground to Top of Exhaust Stacks 13.3 ft - -
    Ground to Top of Hood 10.7 ft - -
    Ground to Center of Rear Axle 3.2 ft - -
    Ground to Fuel Tank Clearance 2.3 ft - -
    Ground to Lower Hitch Clearance 1.5 ft - -
    B-Pin Height at Maximum Lift 15 ft - -
    Rear Axle Center Line to Bumper 10.3 ft - -
    Wheel Base 12.5 ft - -
    Maximum Overall Length 35.4 ft - -
    Front Axle Centerline to Bucket Tip 12.6 ft - -

    Sound Performance - Tier 4 Final / Stage V - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - 72 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - 109 dB(A) -

    Sound Performance - Tier 3 / Stage III - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - 72 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - 110 dB(A) -

    Dimensions (Approximate) - Standard Lift
    Ground to Top of ROPS - 13.8 ft -
    Ground to Top of Exhaust Stacks - 14.8 ft -
    Ground to Top of Hood - 10.9 ft -
    Ground to Bumper Clearance - 3.1 ft -
    Rear Axle - Centerline to Bumper - 10.5 ft -
    Front Axle Centerline to Bucket Tip - 14 ft -
    Wheel Base - 14.9 ft -
    Maximum Overall Length - 39.3 ft -
    Ground to Lower Hitch Clearance - 1.9 ft -
    Ground to Center of Axles - 3.2 ft -
    Clearance at Maximum Lift - 11.9 ft -
    B-Pin Height - Maximum Lift - 18 ft -
    Maximum Overall Height - Bucket Raised - 24.5 ft -
    Reach - Maximum Lift - 6.5 ft -
    Note - Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. -

    Dimensions (Approximate) - High Lift
    Ground to Top of ROPS - 13.8 ft -
    Ground to Top of Exhaust Stacks - 14.8 ft -
    Ground to Top of Hood - 10.9 ft -
    Ground to Bumper Clearance - 3.1 ft -
    Rear Axle - Centerline to Bumper - 10.5 ft -
    Front Axle Centerline to Bucket Tip - 15.3 ft -
    Wheel Base - 14.9 ft -
    Maximum Overall Length - 40.7 ft -
    Ground to Lower Hitch Clearance - 1.9 ft -
    Ground to Center of Axles - 3.2 ft -
    Clearance at Maximum Lift - 13.3 ft -
    B-Pin Height - Maximum Lift - 19.3 ft -
    Maximum Overall Height - Bucket Raised - 25.8 ft -
    Reach - Maximum Lift - 6.8 ft -
    Note - Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. -

    Dimensions - Millyard Linkage
    Ground to Top of ROPS - 13.8 ft -
    Ground to Top of Exhaust Stacks - 13.8 ft -
    Ground to Top of Hood - 10.9 ft -
    Ground to Bumper Clearance - 3.1 ft -
    Rear Axle - Centerline to Bumper - 10.5 ft -
    Front Axle Centerline to Fork Tip - 16.5 ft -
    Wheel Base - 14.9 ft -
    Maximum Overall Length - 41.9 ft -
    Ground to Lower Hitch Clearance - 1.9 ft -
    Ground to Center of Front Axle - 3.2 ft -
    Fork Height with Level Arms - 8.1 ft -
    Fork Top Clamp Opening - 13.1 ft -
    Fork Height at Maximum Lift - 17.2 ft -
    Hinge Pin Height at Maximum Lift - 16.1 ft -
    Dump Angle at Maximum Lift - -39.4 ° -

    Buckets
    Bucket Capacities - 4.7-13 m3 (6.2-17 yd3) -

    Sustainability
    Recyclability - 96% -

    Complete System Fill
    Fuel Tank - Standard - - 856 gal (US)
    Fuel Tank - With 24 hr Attachment - - 1414 gal (US)
    Cooling System - - 138 gal (US)
    Engine Crankcase - - 76 gal (US)
    Transmission - - 110 gal (US)
    Differential - Final Drives - Front - - 220 gal (US)
    Differential - Final Drives - Rear - - 200 gal (US)
    Hydraulic Tank - Implement and Hydraulic Fan - - 270 gal (US)
    Hydraulic Tank - Steering and Braking - - 100 gal (US)
    Oil Renewal System (ORS)* - - 20 gal (US)
    Note - - *Not available on Tier 4 Final/Stage V machines. Not available in all regions.

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard - - 109.4 °F
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) - - 131 °F
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) - - 127.4 °F

    Dimensions - Standard Lift - Approximate
    B-Pin Height - Maximum Lift - - 28.8 ft
    Clearance at Maximum Lift - - 19.8 ft
    Dump Angle at Maximum Lift - - –50.0 degrees
    Front Axle Centerline to Bucket Tip - - 21.9 ft
    Ground to Bumper Clearance - - 4.4 ft
    Ground to Center of Axles - - 6 ft
    Ground to Lower Hitch Clearance - - 2.9 ft
    Ground to Top of Exhaust Stacks - - 23.2 ft
    Ground to Top of Hood - - 18.6 ft
    Ground to Top of ROPS - - 23.4 ft
    Maximum Overall Height - Bucket Raised - - 39.3 ft
    Maximum Overall Length - - 64.6 ft
    Note - - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
    Rack Angle at Maximum Lift - - 59.5 degrees
    Rack Back Angle - Carry - - 47.7 degrees
    Rack Back Angle - Ground Level - - 39.7 degrees
    Reach - Maximum Lift - - 9.6 ft
    Rear Axle - Centerline to Bumper - - 20.4 ft
    Tread Width - - 14.1 ft
    Wheel Base - - 22.3 ft
    Width - Over Tires - With Bulge - - 18.8 ft

    Dimensions - High Lift - Approximate
    B-Pin Height - Maximum Lift - - 31.6 ft
    Clearance at Maximum Lift - - 22.6 ft
    Dump Angle at Maximum Lift - - –50.0 degrees
    Front Axle Centerline to Bucket Tip - - 24.2 ft
    Ground to Bumper Clearance - - 4.4 ft
    Ground to Center of Axles - - 6 ft
    Ground to Lower Hitch Clearance - - 2.9 ft
    Ground to Top of Exhaust Stacks - - 23.2 ft
    Ground to Top of Hood - - 18.6 ft
    Ground to Top of ROPS - - 23.4 ft
    Maximum Overall Height - Bucket Raised - - 42.1 ft
    Maximum Overall Length - - 66.9 ft
    Note - - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
    Rack Angle at Maximum Lift - - 59.4 degrees
    Rack Back Angle - Carry - - 53.5 degrees
    Rack Back Angle - Ground Level - - 45 degrees
    Reach - Maximum Lift - - 9.4 ft
    Rear Axle - Centerline to Bumper - - 20.4 ft
    Tread Width - - 14.1 ft
    Wheel Base - - 22.3 ft
    Width - Over Tires - With Bulge - - 18.8 ft
    Add a Similar Product:
    • 988 GC Wheel Loader Add
    • 990 Wheel Loader Add
    • 992 Wheel Loader Add
    • 988 Wheel Loader Add
    • 938M Waste Handler Small Wheel Loader Add
    • 950 GC Wheel Loader | Front Loader Add
    • 938M Small Wheel Loader Add
    • 938M Aggregate Handler Small Wheel Loader Add
    • 930M Aggregate Handler Small Wheel Loader Add
    • 930M Waste Handler Small Wheel Loader Add