Compare Equipment Go Back
988 GC Wheel Loader |
986 Wheel Loader |
|
|
Engine |
|||
---|---|---|---|
Engine Model | Cat® C15 | C15 Cat® | - |
Rated Speed | 2000 | 2000 | - |
Peak Power Speed | 1600 | 1600 | - |
Engine Power - ISO 14396 | 449 hp | 449 hp | - |
Gross Power - SAE J1995 | 456 hp | - | - |
Net Power - SAE J1349 | 373 hp | 373 hp | - |
Emissions | U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 | U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA | - |
Bore | 5.4 in | 5.4 in | - |
Stroke | 6.75 in | 6.75 in | - |
Displacement | 927 in³ | 927 in² | - |
Peak Torque - 1,200 rpm - SAE J1995 | 1778 ft·lbf | 1778 lb/ft | - |
Torque Rise | 16% | 16% | - |
Peak Power Speed - Gross - SAE J1995 | - | 456 hp | - |
Rated Speed - 2,000 rpm - EEC 80/1269 | - | 373 hp | - |
Rated Speed - 2,000 rpm - EEC 80/1269 (DIN) | - | 378 hp | - |
Rated Speed - 2,000 rpm - ISO 9249 | - | 373 hp | - |
Rated Speed - 2,000 rpm - ISO 9249 (DIN) | - | 378 hp | - |
Operating Specifications |
|||
Operating Weight | 116858 lb | - | - |
Rated Payload - Quarry Face | 12.5 ton (US) | - | - |
Bucket Capacity Range | 6.4-7.6 m3 (8.3-10 yd3) | 5-10,3 m³ (6,5-13,5 yd.³) | - |
Cat Truck Match - High Lift | 772/773/775 | 772/773 | - |
Operating Weight - Standard | - | 97785 lb | - |
Operating Weight - High Lift | - | 104005 lb | - |
Rated Payload - Standard (Quarry Face) | - | 11 ton (US) | - |
Rated Payload - Loose Material (Standard) | - | 14 ton (US) | - |
Rated Payload - High Lift (Quarry Face) | - | 11 ton (US) | - |
Rated Payload - Loose Material (High Lift) | - | 12.1 ton (US) | - |
Cat Truck Match - Standard | - | 770/735/740/745 | - |
Transmission |
|||
Transmission Type | Cat planetary power shift | Cat planetary power shift | - |
Forward - 1 | 5 mile/h | 5 mile/h | - |
Forward - 2 | 8 mile/h | 8 mile/h | - |
Reverse - 1 | 5 mile/h | 5 mile/h | - |
Reverse - 2 | 8 mile/h | 8 mile/h | - |
Direct Drive - Forward 1 | Lock-up disabled | - | - |
Direct Drive - Forward 2 | 8 mile/h | 8 mile/h | - |
Direct Drive - Forward 3 | 14 mile/h | 14 mile/h | - |
Direct Drive - Forward 4 | 24 mile/h | 24 mile/h | - |
Direct Drive - Reverse 1 | Lock-up disabled | - | - |
Direct Drive - Reverse 2 | 9 mile/h | 9 mile/h | - |
Direct Drive - Reverse 3 | 16 mile/h | 16 mile/h | - |
Direct Drive - Reverse 4 | 25.4 mile/h | 25.4 mile/h | - |
Hydraulic System - Lift/Tilt |
|||
Lift/Tilt System - Circuit | EH - Load Sense | Load Sense | - |
Lift/Tilt System | 2X x 145 cc Variable displacement piston | - | - |
Maximum Flow at 2,165 rpm | 159 gal/min | 123 gal/min | - |
Relief Valve Setting - Lift/Tilt | 4598 psi | 4050 psi | - |
Cylinders, Double Acting - Lift, Bore and Stroke | 190 mm x 1216 mm (7.5 in x 48 in) | - | - |
Cylinders, Double Acting - Tilt, Bore and Stroke | 170 mm x 722 mm (6.7 in x 28.4 in) | - | - |
Pilot System | Variable displacement piston | - | - |
Tilt Cylinder - Stroke | 27 in | 28.4 in | - |
Lift/Tilt System - Pump | - | 2 × 110 cc variable displacement | - |
Lift Cylinder - Bore | - | 7.5 in | - |
Lift Cylinder - Stroke | - | 45 in | - |
Tilt Cylinder - Bore | - | 6.7 in | - |
Hydraulic Cycle Times |
|||
Rack Back | 3.8 s | 4.5 s | - |
Raise | 7.5 s | 9 s | - |
Dump | 3 s | 3.5 s | - |
Lower Float Down | 4.6 s | 4.3 s | - |
Total Hydraulic Cycle Time - Empty Bucket | 18.9 s | - | - |
Lower | - | 5.2 s | - |
Total Hydraulic Cycle Time | - | 21.3 s | - |
Hydraulic System - Steering |
|||
Steering System - Circuit | Pilot, load sensing | Load Sense | - |
Steering System - Pump | Piston, variable displacement | Piston, variable displacement | - |
Maximum Flow | 52 gal (US) | - | - |
Relief Valve Setting - Steering | 4000 psi | - | - |
Total Steering Angle | 70° | 70° | - |
Steering Cycle Times - High Idle | 3 s | - | - |
Steering Cycle Times - Low Idle | 5.2 s | - | - |
Maximum Flow at 1,400 rpm | - | 52 gal/min | - |
Steering Cut Off Pressure | - | 4000 psi | - |
Air Conditioning System |
|||
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. | - |
Axles |
|||
Front | Fixed | Fixed | - |
Rear | Trunnion | Trunnion | - |
Oscillation Angle | +/-12.5° | ±12.5° | - |
Oscillation Angle - Chain Arrangement | - | ±8.5° | - |
Brakes |
|||
Brakes | ISO 3450:2011 | ISO 3450:2011 | - |
Operator's Cab |
|||
ROPS/FOPS | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards | ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS) | - |
Service Refill Capacities |
|||
Fuel Tank | 141 gal (US) | 141 gal (US) | - |
Cooling System | 27 gal (US) | - | - |
Engine Crankcase | 9 gal (US) | - | - |
Diesel Exhaust Fluid Tank | 5.5 gal (US) | 6 gal (US) | - |
Transmission | 20 gal (US) | 20 gal (US) | - |
Differential - Final Drives - Front | 49 gal (US) | - | - |
Differential - Final Drives - Rear | 45 gal (US) | - | - |
Note | Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a | - | - |
Fuel Tank - Short Lift | - | 127 gal (US) | - |
Cooling Systems | - | 26 gal (US) | - |
Crankcase | - | 9 gal (US) | - |
Axle Oil - Differentials and Final Drives - Front | - | 49 gal (US) | - |
Axle Oil - Differentials and Final Drives - Rear | - | 45 gal (US) | - |
Hydraulic System Factory Fill | - | 87 gal (US) | - |
Hydraulic System - Tank Only | - | 34 gal (US) | - |
Sound Performance - Tier 4 Final/EU Stage V - Standard |
|||
Operator Sound Level (ISO 6396) | 72 dB(A) | - | - |
Machine Sound Level (ISO 6395) | 110 dB(A) | - | - |
Note (1) | The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - | - |
Note (2) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - | - |
Note (3) | The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - | - |
Dimensions (Approximate) - High Lift |
|||
Ground to Top of ROPS | 13.5 ft | - | - |
Ground to Top of Exhaust Stacks | 13.3 ft | - | - |
Ground to Top of Hood | 10.7 ft | - | - |
Rear Axle - Centerline to Bumper | 10.3 ft | - | - |
Front Axle Centerline to Bucket Tip | 15.7 ft | - | - |
Wheel Base | 12.5 ft | - | - |
Maximum Overall Length | 39.5 ft | - | - |
Ground to Lower Hitch Clearance | 1.5 ft | - | - |
Clearance at Maximum Lift | 12 ft | - | - |
B-Pin Height - Maximum Lift | 18.7 ft | - | - |
Maximum Overall Height - Bucket Raised | 25 ft | - | - |
Reach - Maximum Lift | 7.7 ft | - | - |
Note | Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires. | - | - |
Buckets |
|||
Bucket Capacities | 6.4-7.6 m3 (8.3-10 yd3) | - | - |
Sustainability |
|||
Recyclability | 96% | - | - |
Sound Performance - Standard |
|||
Operator Sound Level (ISO 6396) | - | 72 dB(A) | - |
Machine Sound Level (ISO 6395) | - | 112 dB(A) | - |
Note | - |
|
- |
Sound Performance - Suppression |
|||
Operator Sound Level (ISO 6396) | - | 72 dB(A) | - |
Machine Sound Level (ISO 6395) | - | 110 dB(A) | - |
Note | - |
|
- |
Dimensions (Approximate) - Standard Lift Linkage |
|||
Ground to Top of ROPS | - | 13.5 ft | - |
Ground to Top of Exhaust Stacks | - | 13.3 ft | - |
Ground to Top of Hood | - | 10.7 ft | - |
Ground to Center of Front Axle | - | 3.2 ft | - |
Ground to Fuel Tank Clearance | - | 2.3 ft | - |
Ground to Lower Hitch Clearance | - | 1.5 ft | - |
Reach - Maximum Lift | - | 7.1 ft | - |
Clearance at Maximum Lift | - | 10.1 ft | - |
B-Pin Height - Maximum Lift | - | 16.1 ft | - |
Maximum Overall Height - Bucket Raised | - | 22.4 ft | - |
Rear Axle - Centerline to Bumper | - | 10.3 ft | - |
Wheel Base | - | 12.5 ft | - |
Maximum Overall Length | - | 36.6 ft | - |
Front Axle Centerline to Bucket Tip | - | 13.8 ft | - |
Note | - |
|
- |
Dimensions (Approximate) - High Lift Linkage |
|||
Ground to Top of ROPS | - | 13.5 ft | - |
Ground to Top of Exhaust Stacks | - | 13.3 ft | - |
Ground to Top of Hood | - | 10.7 ft | - |
Ground to Center of Front Axle | - | 3.2 ft | - |
Ground to Fuel Tank Clearance | - | 2.3 ft | - |
Ground to Lower Hitch Clearance | - | 1.5 ft | - |
Reach - Maximum Lift | - | 7.4 ft | - |
Clearance at Maximum Lift | - | 11.6 ft | - |
B-Pin Height - Maximum Lift | - | 17.6 ft | - |
Maximum Overall Height - Bucket Raised | - | 23.9 ft | - |
Rear Axle - Centerline to Bumper | - | 10.3 ft | - |
Wheel Base | - | 12.5 ft | - |
Maximum Overall Length | - | 38 ft | - |
Front Axle Centerline to Bucket Tip | - | 15.3 ft | - |
Note | - |
|
- |
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket |
|||
Ground to Top of ROPS | - | 13.5 ft | - |
Ground to Top of Exhaust Stacks | - | 13.3 ft | - |
Ground to Top of Hood | - | 10.7 ft | - |
Ground to Center of Rear Axle | - | 3.2 ft | - |
Ground to Fuel Tank Clearance | - | 2.3 ft | - |
Ground to Lower Hitch Clearance | - | 1.5 ft | - |
Reach at Maximum Lift | - | 8 ft | - |
Clearance at Maximum Lift | - | 10.7 ft | - |
B-Pin Height at Maximum Lift | - | 15 ft | - |
Maximum Overall Height, Bucket Raised | - | 20.9 ft | - |
Rear Axle Center Line to Bumper | - | 10.3 ft | - |
Wheel Base | - | 12.5 ft | - |
Maximum Overall Length | - | 35 ft | - |
Front Axle Centerline to Bucket Tip | - | 12.2 ft | - |
Dimensions (Approximate) - Quick Coupler and Fork |
|||
Ground to Top of ROPS | - | 13.5 ft | - |
Ground to Top of Exhaust Stacks | - | 13.3 ft | - |
Ground to Top of Hood | - | 10.7 ft | - |
Ground to Center of Rear Axle | - | 3.2 ft | - |
Ground to Fuel Tank Clearance | - | 2.3 ft | - |
Ground to Lower Hitch Clearance | - | 1.5 ft | - |
B-Pin Height at Maximum Lift | - | 15 ft | - |
Rear Axle Center Line to Bumper | - | 10.3 ft | - |
Wheel Base | - | 12.5 ft | - |
Maximum Overall Length | - | 35.4 ft | - |
Front Axle Centerline to Bucket Tip | - | 12.6 ft | - |
Add a Similar Product:
- 992 Wheel Loader Add
- 995 Wheel Loader Add
- 988 XE Wheel Loader Add
- 990 Wheel Loader Add
- 988 Wheel Loader Add
- 938M Aggregate Handler Small Wheel Loader Add
- 938M Waste Handler Small Wheel Loader Add
- 950 GC Wheel Loader | Front Loader Add
- 930M Waste Handler Small Wheel Loader Add
- 938M Small Wheel Loader Add