Compare

Compare Equipment Go Back

Engine
	966 XE View Product	982 View Product Remove	990 Wheel Loader View Product Remove	986 Wheel Loader View Product Remove
Engine Power @ 1,600 rpm - ISO 14396:2002	321 HP	-	-	-
Gross Power @ 1,600 rpm - SAE J1995:2014	325 HP	-	-	-
Engine Model	Cat C9.3B	Cat C13	C27 Cat®	C15 Cat®
Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011	298 HP	-	-	-
Note (1)	Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.	Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards.	-	-
Note (2)	The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.	The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.	-	-
Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011	1226 HP	-	-	-
Note (3)	Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h	Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h	-	-
Gross Torque @ 1,200 rpm – SAE J1995:2014	1327 lb/ft	1636 lb/ft	-	-
Engine Torque @ 1,200 rpm – ISO 14396:2002	1313 lb/ft	1620 lb/ft	-	-
Displacement	9.3 L	-	1649.5 in³	927 in²
Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011	-	404 HP	-	-
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011	-	1515 lb/ft	-	-
Engine Power @ 1,700 rpm – ISO 14396:2002	-	432 HP	-	-
Gross Power @ 1,700 rpm – SAE J1995:2014	-	436 HP	-	-
Rated Speed	-	-	1,800/min	2000
Engine Power - ISO 14396	-	-	752 HP	449 HP
Gross Power - SAE J1995	-	-	766 HP	-
Net Power - SAE J1349 - Standard Ambient	-	-	699 HP	-
Net Power - SAE J1349 - High Ambient	-	-	648 HP	-
Bore	-	-	5.4 in	5.4 in
Stroke	-	-	6 in	6.75 in
Peak Torque - 1,200 rpm	-	-	2624 lb/ft	-
Torque Rise	-	-	18 %	16%
Emissions	-	-	U.S. EPA TIer 4 Final and EU Stage V emission standards or U.S. EPA Tier 2 and EU Stage II equivalent	U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA
Peak Power Speed	-	-	-	1600
Peak Power Speed - Gross - SAE J1995	-	-	-	456 HP
Net Power - SAE J1349	-	-	-	373 HP
Rated Speed - 2,000 rpm - EEC 80/1269	-	-	-	373 HP
Rated Speed - 2,000 rpm - EEC 80/1269 (DIN)	-	-	-	378 HP
Rated Speed - 2,000 rpm - ISO 9249	-	-	-	373 HP
Rated Speed - 2,000 rpm - ISO 9249 (DIN)	-	-	-	378 HP
Peak Torque - 1,200 rpm - SAE J1995	-	-	-	1778 lb/ft
Weights
Operating Weight	51124 lb	78264 lb	-	-
Note	Weight based on a machine configuration with Bridgestone 26.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, front manual differential/open rear axles, power train guard, sec	Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun	-	-
Bucket Capacities
Bucket Range	2.8-11.9 m³ 3.75-15.5 yd³	4.8-17.2 m³ 6.25-22.5 yd³	-	-
Transmission
Forward - 1	4.3 mile/h	3.9 mile/h	4.5 mile/h	5 mile/h
Forward - 2	8 mile/h	7.4 mile/h	8.3 mile/h	8 mile/h
Forward - 3	14.1 mile/h	13.1 mile/h	14.2 mile/h	-
Forward - 4	24.5 mile/h	23.3 mile/h	-	-
Note	Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius.	Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius.	Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.	-
Reverse - 1	4.3 mile/h	4.3 mile/h	4.9 mile/h	5 mile/h
Reverse - 2	8 mile/h	8.5 mile/h	9.1 mile/h	8 mile/h
Reverse - 3	17.9 mile/h	15 mile/h	15.5 mile/h	-
Reverse - 4	-	24.5 mile/h	-	-
Transmission Type	-	-	Cat planetary power shift	Cat planetary power shift
Direct Drive - Forward 1	-	-	Lock-up disabled	-
Direct Drive - Forward 2	-	-	8.5 mile/h	8 mile/h
Direct Drive - Forward 3	-	-	15.2 mile/h	14 mile/h
Direct Drive - Reverse 1	-	-	5.4 mile/h	-
Direct Drive - Reverse 2	-	-	9.6 mile/h	9 mile/h
Direct Drive - Reverse 3	-	-	16.4 mile/h	16 mile/h
Direct Drive - Forward 4	-	-	-	24 mile/h
Direct Drive - Reverse 4	-	-	-	25.4 mile/h
Sound
Note (1)	** For machines in European Union countries and in countries that adopt the EU Directives.	** For machines in European Union countries and in countries that adopt the �EU Directives.�	-	-
Note (2)	***European Union Directive 2000/14/EC as amended by 2005/88/EC.	***European Union Directive �2000/14/EC� as amended by �2005/88/EC.�	-	-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*	105	109	-	-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)	67 dB(A)	72 dB(A)	-	-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)	107 dB(A)	112 dB(A)	-	-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)	74	78	-	-
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)	67 dB(A)	72 dB(A)	-	-
With Cooling Fan Speed at Maximum Value - Note	Distance of 15 m (49.2 ft), moving forward in second gear ratio.	-	-	-
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons).	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.7 kg of refrigerant which has a CO2 equivalent of 3.861 metric tonnes (4.256 tons).	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Operating Specifications
Breakout Force	38999 lb	59060 lbf	-	-
Note (1)	For a machine configuration as defined under �Weight.�	For a machine configuration as defined under �Weight.�	-	-
Note (2)	Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.	Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.	-	-
Static Tipping Load - Full 40° Turn - No Tire Deflection	15981 kg	22418 kg	-	-
Static Tipping Load - Full 40° Turn - With Tire Deflection	32727 lb	46526 lb	-	-
Operating Weight	-	-	178517 lb	-
Rated Payload - Standard	-	-	17.5 ton (US)	-
Rated Payload - High Lift	-	-	17.5 ton (US)	-
Bucket Capacity Range	-	-	8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)	5-10,3 m³ (6,5-13,5 yd.³)
Cat Truck Match - Standard	-	-	773-775	770/735/740/745
Cat Truck Match - High Lift	-	-	775-777	772/773
Operating Weight - Standard	-	-	-	97785 lb
Operating Weight - High Lift	-	-	-	104005 lb
Rated Payload - Standard (Quarry Face)	-	-	-	11 ton (US)
Rated Payload - Loose Material (Standard)	-	-	-	14 ton (US)
Rated Payload - High Lift (Quarry Face)	-	-	-	11 ton (US)
Rated Payload - Loose Material (High Lift)	-	-	-	12.1 ton (US)
Service Refill Capacities
Cooling System	17.4 gal (US)	13.7 gal (US)	54.9 gal (US)	-
Crankcase	6.1 gal (US)	9.8 gal (US)	-	9 gal (US)
DEF Tank	6.9 gal (US)	5.5 gal (US)	-	-
Differential - Final Drives - Front	15.1 gal (US)	24.3 gal (US)	71.6 gal (US)	-
Differential - Final Drives - Rear	15.1 gal (US)	24.3 gal (US)	68.9 gal (US)	-
Fuel Tank	80.1 gal (US)	112.5 gal (US)	294.3 gal (US)	141 gal (US)
Hydraulic Tank	30.1 gal (US)	40.4 gal (US)	-	-
Transmission	16.6 gal (US)	20.3 gal (US)	29.1 gal (US)	20 gal (US)
Engine Crankcase	-	-	20 gal (US)	-
Hydraulic System Factory Fill	-	-	210 gal (US)	87 gal (US)
Hydraulic Tank - Implement and Hydraulic Fan	-	-	68.9 gal (US)	-
Hydraulic Tank - Steering and Braking	-	-	34.9 gal (US)	-
Note	-	-	All nonroad U.S. EPA Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or l	-
Fuel Tank - Short Lift	-	-	-	127 gal (US)
Cooling Systems	-	-	-	26 gal (US)
Diesel Exhaust Fluid Tank	-	-	-	6 gal (US)
Axle Oil - Differentials and Final Drives - Front	-	-	-	49 gal (US)
Axle Oil - Differentials and Final Drives - Rear	-	-	-	45 gal (US)
Hydraulic System - Tank Only	-	-	-	34 gal (US)
Hydraulic System
Implement System - Maximum Operating Pressure	4496 psi	4975 psi	-	-
Implement System - Maximum Pump Output at 2,250 rpm	92 gal/min	119 gal/min	-	-
Hydraulic Cycle Time - Total	10.1 seconds	-	-	-
Dimensions
Note	All dimensions are approximate and based on machine equipped with 4.2 m3 (5.5 yd3) general purpose bucket with BOCE and Bridgestone 26.5R25 VJT L3 radial tires.	All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires.	-	-
Dimensions - High Lift
Centerline of Rear Axle to Edge of Counterweight	8.1 ft	9.4 ft	-	-
Centerline of Rear Axle to Hitch	5.1 ft	6.3 ft	-	-
Ground Clearance	1.4 ft	1.4 ft	-	-
Height - Top of Exhaust Pipe	11.8 ft	12.4 ft	-	-
Height - Top of Hood	9.5 ft	10 ft	-	-
Height - Top of ROPS	11.1 ft	12.6 ft	-	-
Hinge Pin Height at Carry	2.6 ft	2.11 ft	-	-
Hinge Pin Height at Maximum Lift	15.9 ft	16.1 ft	-	-
Lift Arm Clearance at Maximum Lift	13.8 ft	13.4 ft	-	-
Overall Length - Without Bucket	26.6 ft	29.11 ft	-	-
Tread Width	7.3 ft	8.4 ft	-	-
Wheel Base	11.8 ft	12.6 ft	-	-
Rack Back at Ground	37 degrees	-	-	-
Width over Tires (Loaded)	9.11 ft	11.5 ft	-	-
Rack Back - Maximum Lift	71 degrees	-	-	-
Rack Back - Carry Height	49 degrees	-	-	-
Dimensions - Standard Lift
Centerline of Rear Axle to Edge of Counterweight	7.7 ft	8.9 ft	-	-
Centerline of Rear Axle to Hitch	5.1 ft	6.3 ft	-	-
Ground Clearance	424 mm	428 mm	-	-
Height - Top of Exhaust Pipe	3531 mm	3736 mm	-	-
Height - Top of Hood	2580 mm	3036 mm	-	-
Height - Top of ROPS	3593 mm	3801 mm	-	-
Hinge Pin Height at Carry	2 ft	2.7 ft	-	-
Hinge Pin Height at Maximum Lift	4245 mm	4741 mm	-	-
Lift Arm Clearance at Maximum Lift	3687 mm	3902 mm	-	-
Overall Length - Without Bucket	7399 mm	8597 mm	-	-
Tread Width	7.3 ft	8.4 ft	-	-
Wheel Base	3550 mm	3800 mm	-	-
Width over Tires (Loaded)	9.11 ft	11.5 ft	-	-
Rack Back - Carry Height	50 degrees	-	-	-
Rack Back at Ground	40 degrees	-	-	-
Rack Back - Maximum Lift	62 degrees	-	-	-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	-	-	Positive flow control	Load Sense
Lift/Tilt System	-	-	Variable displacement piston	-
Maximum Flow at 1,800 rpm (1)	-	-	240 gal/min	-
Cylinders, Double Acting - Lift, Bore and Stroke	-	-	235 mm × 1287 mm (9.3 in × 50.7 in)	-
Cylinders, Double Acting - Tilt, Bore and Stroke	-	-	292.1 mm × 820 mm (11.5 in × 32.3 in)	-
Pilot System	-	-	Open loop and pressure reducing	-
Relief Valve Setting - Main	-	-	507 psi	-
Relief Valve Setting - Lift/Tilt	-	-	4786 psi	4050 psi
Lift/Tilt System - Pump	-	-	-	2 × 110 cc variable displacement
Maximum Flow at 2,165 rpm	-	-	-	123 gal/min
Lift Cylinder - Bore	-	-	-	7.5 in
Lift Cylinder - Stroke	-	-	-	45 in
Tilt Cylinder - Bore	-	-	-	6.7 in
Tilt Cylinder - Stroke	-	-	-	28.4 in
Hydraulic Cycle Times
Rack Back	-	-	4.3 s	4.5 s
Raise	-	-	8.2 s	9 s
Dump	-	-	2.9 s	3.5 s
Lower	-	-	3.7 s	5.2 s
Lower Float Down	-	-	3.6 s	4.3 s
Total Hydraulic Cycle Time - Empty Bucket	-	-	13.8 s	-
Total Hydraulic Cycle Time	-	-	-	21.3 s
Hydraulic System - Steering
Steering System - Circuit	-	-	Pilot, load sensing	Load Sense
Steering System - Pump	-	-	Piston, variable displacement	Piston, variable displacement
Maximum Flow at 1,400 rpm	-	-	96.2 gal/min	52 gal/min
Relief Valve Setting - Steering	-	-	5004 psi	-
Total Steering Angle	-	-	70°	70°
Steering Cut Off Pressure	-	-	-	4000 psi
Axles
Front	-	-	Fixed	Fixed
Rear	-	-	Trunnion	Trunnion
Oscillation Angle	-	-	8.5°	±12.5°
Oscillation Angle - Chain Arrangement	-	-	-	±8.5°
Brakes
Brakes	-	-	ISO 3450: 2011	ISO 3450:2011
Sound Performance - Standard
Operator Sound Level (ISO 6396:2008)	-	-	65.5 dB(A)	-
Machine Sound Level (ISO 6395:2008)	-	-	115 dB(A)	-
Operator Sound Level (ISO 6396)	-	-	-	72 dB(A)
Machine Sound Level (ISO 6395)	-	-	-	112 dB(A)
Note	-	-	-	The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be neede
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008)	-	-	65.5 dB(A)	-
Machine Sound Level (ISO 6395:2008)	-	-	113 dB(A)	-
Operator Sound Level (ISO 6396)	-	-	-	72 dB(A)
Machine Sound Level (ISO 6395)	-	-	-	110 dB(A)
Note	-	-	-	The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be neede
Buckets
Bucket Capacities	-	-	8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)	-
Operator's Cab
ROPS/FOPS	-	-	-	ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS	-	-	-	13.5 ft
Ground to Top of Exhaust Stacks	-	-	-	13.3 ft
Ground to Top of Hood	-	-	-	10.7 ft
Ground to Center of Front Axle	-	-	-	3.2 ft
Ground to Fuel Tank Clearance	-	-	-	2.3 ft
Ground to Lower Hitch Clearance	-	-	-	1.5 ft
Reach - Maximum Lift	-	-	-	7.1 ft
Clearance at Maximum Lift	-	-	-	10.1 ft
B-Pin Height - Maximum Lift	-	-	-	16.1 ft
Maximum Overall Height - Bucket Raised	-	-	-	22.4 ft
Rear Axle - Centerline to Bumper	-	-	-	10.3 ft
Wheel Base	-	-	-	12.5 ft
Maximum Overall Length	-	-	-	36.6 ft
Front Axle Centerline to Bucket Tip	-	-	-	13.8 ft
Note	-	-	-	All dimensions are approximate. Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS	-	-	-	13.5 ft
Ground to Top of Exhaust Stacks	-	-	-	13.3 ft
Ground to Top of Hood	-	-	-	10.7 ft
Ground to Center of Front Axle	-	-	-	3.2 ft
Ground to Fuel Tank Clearance	-	-	-	2.3 ft
Ground to Lower Hitch Clearance	-	-	-	1.5 ft
Reach - Maximum Lift	-	-	-	7.4 ft
Clearance at Maximum Lift	-	-	-	11.6 ft
B-Pin Height - Maximum Lift	-	-	-	17.6 ft
Maximum Overall Height - Bucket Raised	-	-	-	23.9 ft
Rear Axle - Centerline to Bumper	-	-	-	10.3 ft
Wheel Base	-	-	-	12.5 ft
Maximum Overall Length	-	-	-	38 ft
Front Axle Centerline to Bucket Tip	-	-	-	15.3 ft
Note	-	-	-	All dimensions are approximate. Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
Ground to Top of ROPS	-	-	-	13.5 ft
Ground to Top of Exhaust Stacks	-	-	-	13.3 ft
Ground to Top of Hood	-	-	-	10.7 ft
Ground to Center of Rear Axle	-	-	-	3.2 ft
Ground to Fuel Tank Clearance	-	-	-	2.3 ft
Ground to Lower Hitch Clearance	-	-	-	1.5 ft
Reach at Maximum Lift	-	-	-	8 ft
Clearance at Maximum Lift	-	-	-	10.7 ft
B-Pin Height at Maximum Lift	-	-	-	15 ft
Maximum Overall Height, Bucket Raised	-	-	-	20.9 ft
Rear Axle Center Line to Bumper	-	-	-	10.3 ft
Wheel Base	-	-	-	12.5 ft
Maximum Overall Length	-	-	-	35 ft
Front Axle Centerline to Bucket Tip	-	-	-	12.2 ft
Dimensions (Approximate) - Quick Coupler and Fork
Ground to Top of ROPS	-	-	-	13.5 ft
Ground to Top of Exhaust Stacks	-	-	-	13.3 ft
Ground to Top of Hood	-	-	-	10.7 ft
Ground to Center of Rear Axle	-	-	-	3.2 ft
Ground to Fuel Tank Clearance	-	-	-	2.3 ft
Ground to Lower Hitch Clearance	-	-	-	1.5 ft
B-Pin Height at Maximum Lift	-	-	-	15 ft
Rear Axle Center Line to Bumper	-	-	-	10.3 ft
Wheel Base	-	-	-	12.5 ft
Maximum Overall Length	-	-	-	35.4 ft
Front Axle Centerline to Bucket Tip	-	-	-	12.6 ft

Compare Equipment Go Back

966 XE

982

990 Wheel Loader

986 Wheel Loader

Engine

Weights

Bucket Capacities

Transmission

Sound

Air Conditioning System

Operating Specifications

Service Refill Capacities

Hydraulic System

Dimensions

Dimensions - High Lift

Dimensions - Standard Lift

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Hydraulic System - Steering

Axles

Brakes

Sound Performance - Standard

Sound Performance - Suppression

Buckets

Operator's Cab

Dimensions (Approximate) - Standard Lift Linkage

Dimensions (Approximate) - High Lift Linkage

Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket

Dimensions (Approximate) - Quick Coupler and Fork

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us