|
|
|
|
|
Engine |
Engine Power @ 1,600 rpm - ISO 14396:2002 |
321 HP |
- |
- |
339 HP |
Gross Power @ 1,600 rpm - SAE J1995:2014 |
325 HP |
- |
- |
343 HP |
Engine Model |
Cat C9.3B |
Cat® 3516E |
Cat® C32B |
Cat C9.3B |
Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011 |
303 HP |
- |
- |
316 HP |
Note (1) |
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards. |
The power ratings apply when tested under the reference conditions for the specified standard. |
- |
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
Note (2) |
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. |
- |
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011 |
1255 ft-lb |
- |
- |
1287 ft-lb |
Engine Torque @ 1,200 rpm – ISO 14396:2002 |
1313 lb/ft |
- |
- |
1375 lb/ft |
Gross Torque @ 1,200 rpm – SAE J1995:2014 |
1327 lb/ft |
- |
- |
1388 lb/ft |
Note (3) |
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h |
The gross power advertised is with the fan at maximum speed. |
- |
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h |
Displacement |
9.3 L |
4766 in³ |
1963.5 in³ |
9.3 L |
Emissions |
- |
U.S. EPA Tier 4 Final/EU Stage V or
U.S. EPA Tier 1 equivalent |
U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent |
- |
Engine Power - ISO 14396 |
- |
1847 HP |
- |
- |
Gross Power - SAE J1995 |
- |
1870 HP |
- |
- |
Net Power - SAE J1349 - Standard Ambient |
- |
1739 HP |
- |
- |
Net Power - SAE J1349 - High Ambient |
- |
1696 HP |
- |
- |
Bore |
- |
6.7 in |
5.7 in |
- |
Stroke |
- |
8.5 in |
6.4 in |
- |
Peak Torque - 1,200 rpm - SAE J1995 |
- |
8549 lb/ft |
- |
- |
Torque Rise |
- |
39% |
- |
- |
Net Power |
- |
- |
814 HP |
- |
Rated Speed |
- |
- |
1750 rpm |
- |
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard |
- |
- |
900 HP |
- |
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient |
- |
- |
937 HP |
- |
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard |
- |
- |
907 HP |
- |
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient |
- |
- |
944 HP |
- |
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard |
- |
- |
884 HP |
- |
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient |
- |
- |
921 HP |
- |
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard |
- |
- |
893 HP |
- |
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient |
- |
- |
931 HP |
- |
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard |
- |
- |
814 HP |
- |
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient |
- |
- |
814 HP |
- |
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard |
- |
- |
823 HP |
- |
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient |
- |
- |
823 HP |
- |
Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm |
- |
- |
3514 ft·lbf |
- |
Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm |
- |
- |
3555 ft·lbf |
- |
Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm |
- |
- |
3537 ft·lbf |
- |
Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm |
- |
- |
3570 ft·lbf |
- |
Weights |
Operating Weight |
51124 lb |
- |
- |
54858 lb |
Note |
Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s |
- |
- |
Weight based on a machine configuration with Bridgestone 26.5R25 VJTL3 radial tires, full fluids, operator, standard counterweight, ride control,cold start, roading fenders, Product Link, front manual differential/openrear axles, power train guard, second |
Bucket Capacities |
Bucket Range |
2.8-11.9 m³ 3.75-15.5 yd³ |
- |
- |
2.8-14.0 m³ 3.75-18.25 yd³ |
Transmission |
Forward - 1 |
4.2 mile/h |
4.6 mile/h |
4.3 mile/h |
4.1 mile/h |
Forward - 2 |
8.4 mile/h |
8 mile/h |
7.4 mile/h |
8.4 mile/h |
Forward - 3 |
15 mile/h |
13.6 mile/h |
12.7 mile/h |
15 mile/h |
Forward - 4 |
24.5 mile/h |
- |
- |
24.5 mile/h |
Note |
Maximum travel speed in standard vehicle with empty bucket and
standard L3 tires with 849 mm (33 in) roll radius. |
Travel speeds based on 58/85-57 tires. |
- |
Maximum travel speed in standard vehicle with empty bucket and
standard L3 tires with 849 mm (33 in) roll radius. |
Reverse - 1 |
4.5 mile/h |
5 mile/h |
4.7 mile/h |
4.5 mile/h |
Reverse - 2 |
9.2 mile/h |
8.8 mile/h |
8.1 mile/h |
9.2 mile/h |
Reverse - 3 |
16.5 mile/h |
14.9 mile/h |
13.9 mile/h |
16.5 mile/h |
Reverse - 4 |
24.5 mile/h |
- |
- |
24.5 mile/h |
Transmission Type |
- |
Cat Planetary Power Shift |
Cat Planetary Powershift |
- |
Direct Drive - Forward 1 |
- |
Lock-up disables |
Disabled |
- |
Direct Drive - Forward 2 |
- |
8.7 mile/h |
8 mile/h |
- |
Direct Drive - Forward 3 |
- |
15.2 mile/h |
14 mile/h |
- |
Direct Drive - Reverse 1 |
- |
Lock-up disables |
5 mile/h |
- |
Direct Drive - Reverse 2 |
- |
9.6 mile/h |
8.8 mile/h |
- |
Direct Drive - Reverse 3 |
- |
16.8 mile/h |
15.3 mile/h |
- |
Sound |
Note (1) |
** For machines in European Union countries and in countries that adopt the EU Directives. |
- |
- |
** For machines in European Union countries and in countries that adopt the EU Directives. |
Note (2) |
***European Union Directive 2000/14/EC as amended by 2005/88/EC. |
- |
- |
***European Union Directive 2000/14/EC as amended by 2005/88/EC. |
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* |
108 |
- |
- |
108 |
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) |
69 dB(A) |
- |
- |
69 dB(A) |
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) |
109 dB(A) |
- |
- |
109 dB(A) |
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) |
76 |
- |
- |
76 |
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) |
70 dB(A) |
- |
- |
70 dB(A) |
With Cooling Fan Speed at Maximum Value - Note |
Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
- |
- |
Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
Air Conditioning System |
Air Conditioning |
The air conditioning system on this machine contains the fluorinated
greenhouse gas refrigerant R134a (Global Warming Potential = 1430).
The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2
equivalent 2.288 metric tonnes (2.522 tons). |
- |
- |
The air conditioning system on this machine contains the fluorinated
greenhouse gas refrigerant R134a (Global Warming Potential = 1430).
The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2
equivalent 2.288 metric tonnes (2.522 tons). |
Operating Specifications |
Breakout Force |
38999 lb |
- |
- |
44072 lb |
Note (1) |
For a machine configuration as defined under Weight. |
- |
- |
For a machine configuration as defined under Weight. |
Note (2) |
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
- |
- |
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
Static Tipping Load - Full 40° Turn - No Tire Deflection |
15981 kg |
- |
- |
17505 kg |
Static Tipping Load - Full 40° Turn - With Tire Deflection |
32727 lb |
- |
- |
35919 lb |
Operating Weight - Standard |
- |
543772 lb |
- |
- |
Bucket Capacity Range |
- |
17.2-43.6 m3 (22.3-57 yd3) |
11.5-24.5 m³ (15-32 yd³) |
- |
Operating Weight - High Lift |
- |
547675 lb |
- |
- |
Rated Payload - Standard Lift (Low to Moderate Digging Resistance) |
- |
60 ton (US) |
- |
- |
Rated Payload - Standard Lift (Moderate to High Digging Resistance) |
- |
50 ton (US) |
- |
- |
Rated Payload - High Lift (Low to Moderate Digging Resistance) |
- |
55 ton (US) |
- |
- |
Rated Payload - High Lift (Moderate to High Digging Resistance) |
- |
50 ton (US) |
- |
- |
Note |
- |
*Please contact your local dealer to determine if your application is suitable for this increased rated payload. |
- |
- |
Cat Truck Match - Standard |
- |
785/789 |
775/777 |
- |
Cat Truck Match - High Lift |
- |
789/793/794 |
785 |
- |
Operating Weight |
- |
- |
233430 lb |
- |
Rated Payload - Standard |
- |
- |
25.5 ton (US) |
- |
Rated Payload - Standard (Material Handler) |
- |
- |
30 ton (US) |
- |
Rated Payload - High Lift |
- |
- |
22.5 ton (US) |
- |
Rated Payload - High Lift (Material Handler) |
- |
- |
27 ton (US) |
- |
Service Refill Capacities |
Cooling System |
17.4 gal (US) |
- |
- |
17.4 gal (US) |
Crankcase |
6.1 gal (US) |
- |
31.7 gal (US) |
6.1 gal (US) |
DEF Tank |
6.9 gal (US) |
- |
- |
6.9 gal (US) |
Differential - Final Drives - Front |
15.1 gal (US) |
- |
96.4 gal (US) |
15.1 gal (US) |
Differential - Final Drives - Rear |
15.1 gal (US) |
- |
96.4 gal (US) |
15.1 gal (US) |
Fuel Tank |
80.1 gal (US) |
- |
385.7 gal (US) |
80.1 gal (US) |
Hydraulic Tank |
30.1 gal (US) |
- |
- |
30.1 gal (US) |
Transmission |
15.5 gal (US) |
- |
51.5 gal (US) |
15.5 gal (US) |
Cooling Systems |
- |
- |
59.4 gal (US) |
- |
Hydraulic System Factory Fill (Implement) |
- |
- |
104.1 gal (US) |
- |
Hydraulic Tank - Implement |
- |
- |
60.2 gal (US) |
- |
Hydraulic Factory Fill (Steering) |
- |
- |
32.5 gal (US) |
- |
Hydraulic Tank (Steering Tank Only) |
- |
- |
26.3 gal (US) |
- |
Hydraulic System |
Implement System - Maximum Operating Pressure |
4496 psi |
- |
- |
4496 psi |
Implement System - Maximum Pump Output at 2,250 rpm |
99 gal/min |
- |
- |
99 gal/min |
Hydraulic Cycle Time - Total |
10.1 seconds |
- |
- |
10.7 seconds |
Dimensions |
Note |
All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires. |
- |
- |
All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires. |
Dimensions - High Lift |
Centerline of Rear Axle to Edge of Counterweight |
8.1 ft |
- |
- |
8.1 ft |
Centerline of Rear Axle to Hitch |
5.1 ft |
- |
- |
5.1 ft |
Ground Clearance |
1.4 ft |
- |
- |
1.4 ft |
Height - Top of Exhaust Pipe |
11.8 ft |
- |
- |
11.8 ft |
Height - Top of Hood |
9.5 ft |
- |
- |
9.5 ft |
Height - Top of ROPS |
11.1 ft |
- |
- |
11.1 ft |
Hinge Pin Height at Carry |
2.6 ft |
- |
- |
2.6 ft |
Hinge Pin Height at Maximum Lift |
15.9 ft |
- |
- |
15.9 ft |
Lift Arm Clearance at Maximum Lift |
13.8 ft |
- |
- |
13.8 ft |
Overall Length - Without Bucket |
26.6 ft |
- |
- |
26.6 ft |
Tread Width |
7.3 ft |
- |
- |
7.3 ft |
Wheel Base |
11.8 ft |
- |
- |
11.8 ft |
Rack Back - Carry Height |
49 degrees |
- |
- |
49 degrees |
Rack Back - Maximum Lift |
71 degrees |
- |
- |
71 degrees |
Width over Tires (Loaded) |
9.11 ft |
- |
- |
9.11 ft |
Rack Back at Ground |
37 degrees |
- |
- |
37 degrees |
Dimensions - Standard Lift |
Centerline of Rear Axle to Edge of Counterweight |
7.7 ft |
- |
- |
8 ft |
Centerline of Rear Axle to Hitch |
5.1 ft |
- |
- |
5.1 ft |
Ground Clearance |
424 mm |
- |
- |
420 mm |
Height - Top of Exhaust Pipe |
3531 mm |
- |
- |
3527 mm |
Height - Top of Hood |
2850 mm |
- |
- |
2846 mm |
Height - Top of ROPS |
3593 mm |
- |
- |
3589 mm |
Hinge Pin Height at Carry |
2 ft |
- |
- |
2.2 ft |
Hinge Pin Height at Maximum Lift |
4245 mm |
- |
- |
4464 mm |
Lift Arm Clearance at Maximum Lift |
3687 mm |
- |
- |
3843 mm |
Overall Length - Without Bucket |
7399 mm |
- |
- |
7731 mm |
Tread Width |
7.3 ft |
- |
- |
7.3 ft |
Wheel Base |
3550 mm |
- |
- |
3550 mm |
Rack Back - Carry Height |
50 degrees |
- |
- |
49 degrees |
Width over Tires (Loaded) |
9.11 ft |
- |
- |
9.11 ft |
Rack Back - Maximum Lift |
62 degrees |
- |
- |
56 degrees |
Rack Back at Ground |
39 degrees |
- |
- |
39 degrees |
Complete System Fill |
Fuel Tank - Standard |
- |
856 gal (US) |
- |
- |
Fuel Tank - With 24 hr Attachment |
- |
1414 gal (US) |
- |
- |
Cooling System |
- |
138 gal (US) |
- |
- |
Engine Crankcase |
- |
76 gal (US) |
- |
- |
Transmission |
- |
110 gal (US) |
- |
- |
Differential - Final Drives - Front |
- |
220 gal (US) |
- |
- |
Differential - Final Drives - Rear |
- |
200 gal (US) |
- |
- |
Hydraulic Tank - Implement and Hydraulic Fan |
- |
270 gal (US) |
- |
- |
Hydraulic Tank - Steering and Braking |
- |
100 gal (US) |
- |
- |
Oil Renewal System (ORS)* |
- |
20 gal (US) |
- |
- |
Note |
- |
*Not available on Tier 4 Final/Stage V machines. Not available in all regions. |
- |
- |
Axles |
Front |
- |
Fixed |
Fixed |
- |
Rear |
- |
Trunnion |
Trunnion |
- |
Oscillation Angle |
- |
9° |
±9° |
- |
Cooling System |
Ambient Capability Hydraulically Driven Demand Fan - Standard |
- |
109.4 °F |
109.4 °F |
- |
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) |
- |
131 °F |
- |
- |
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) |
- |
127.4 °F |
- |
- |
Ambient Capability, Hydraulically Driven Demand Fan - High |
- |
- |
131 °F |
- |
Sound Performance - Standard |
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent |
- |
74 dB(A) |
- |
- |
Machine Sound Level (ISO 6395:2008) |
- |
119 dB(A) |
- |
- |
Note |
- |
The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c |
Machine Sound Level (ISO 6396:2008) - 116 dB(A) |
- |
Sound Performance - Suppression |
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent |
- |
73 dB(A) |
- |
- |
Machine Sound Level (ISO 6395:2008) |
- |
117 dB(A) |
- |
- |
Note |
- |
The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c |
Machine Sound Level (ISO 6396:2008) - 113 dB(A) |
- |
Hydraulic System - Steering |
Steering System - Circuit |
- |
Pilot, Load Sensing |
Pilot, Load Sensing |
- |
Steering System - Pump |
- |
Piston, Variable Displacement |
Piston, Variable Displacement |
- |
Total Steering Angle |
- |
80 degrees |
80° |
- |
Steering Cycle Times - Low Idle |
- |
7.6 s |
4.9 s |
- |
Steering Cycle Times - High Idle |
- |
4.3 s |
3.1 s |
- |
Maximum Flow at 1,400-1,850 rpm |
- |
- |
70 gal/min |
- |
Steering Cut Off Pressure |
- |
- |
4500 psi |
- |
Dimensions - Standard Lift - Approximate |
B-Pin Height - Maximum Lift |
- |
28.8 ft |
22.8 ft |
- |
Clearance at Maximum Lift |
- |
19.8 ft |
15.2 ft |
- |
Dump Angle at Maximum Lift |
- |
–50.0 degrees |
-49.5 degrees |
- |
Front Axle Centerline to Bucket Tip |
- |
21.9 ft |
18 ft |
- |
Ground to Bumper Clearance |
- |
4.4 ft |
3.8 ft |
- |
Ground to Center of Axles |
- |
6 ft |
- |
- |
Ground to Lower Hitch Clearance |
- |
2.9 ft |
2.2 ft |
- |
Ground to Top of Exhaust Stacks |
- |
23.2 ft |
17 ft |
- |
Ground to Top of Hood |
- |
18.6 ft |
13.1 ft |
- |
Ground to Top of ROPS |
- |
23.4 ft |
18.3 ft |
- |
Maximum Overall Height - Bucket Raised |
- |
39.3 ft |
30.8 ft |
- |
Maximum Overall Length |
- |
64.6 ft |
50.8 ft |
- |
Note |
- |
Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. |
- |
- |
Rack Angle at Maximum Lift |
- |
59.5 degrees |
- |
- |
Rack Back Angle - Carry |
- |
47.7 degrees |
48.9 degrees |
- |
Rack Back Angle - Ground Level |
- |
39.7 degrees |
40.2 degrees |
- |
Reach - Maximum Lift |
- |
9.6 ft |
8.2 ft |
- |
Rear Axle - Centerline to Bumper |
- |
20.4 ft |
13.5 ft |
- |
Tread Width |
- |
14.1 ft |
10.83 ft |
- |
Wheel Base |
- |
22.3 ft |
19.3 ft |
- |
Width - Over Tires - With Bulge |
- |
18.8 ft |
14.74 ft |
- |
Ground to Center of Front Axle |
- |
- |
4.3 ft |
- |
Rack Back Angle - Maximum Lift |
- |
- |
56.9 degrees |
- |
Dimensions - High Lift - Approximate |
B-Pin Height - Maximum Lift |
- |
31.6 ft |
24.5 ft |
- |
Clearance at Maximum Lift |
- |
22.6 ft |
17.2 ft |
- |
Dump Angle at Maximum Lift |
- |
–50.0 degrees |
-48.1 degrees |
- |
Front Axle Centerline to Bucket Tip |
- |
24.2 ft |
18.8 ft |
- |
Ground to Bumper Clearance |
- |
4.4 ft |
3.8 ft |
- |
Ground to Center of Axles |
- |
6 ft |
- |
- |
Ground to Lower Hitch Clearance |
- |
2.9 ft |
2.2 ft |
- |
Ground to Top of Exhaust Stacks |
- |
23.2 ft |
17 ft |
- |
Ground to Top of Hood |
- |
18.6 ft |
13.1 ft |
- |
Ground to Top of ROPS |
- |
23.4 ft |
18.3 ft |
- |
Maximum Overall Height - Bucket Raised |
- |
42.1 ft |
32 ft |
- |
Maximum Overall Length |
- |
66.9 ft |
51.6 ft |
- |
Note |
- |
Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. |
- |
- |
Rack Angle at Maximum Lift |
- |
59.4 degrees |
- |
- |
Rack Back Angle - Carry |
- |
53.5 degrees |
51.6 degrees |
- |
Rack Back Angle - Ground Level |
- |
45 degrees |
42.5 degrees |
- |
Reach - Maximum Lift |
- |
9.4 ft |
7.6 ft |
- |
Rear Axle - Centerline to Bumper |
- |
20.4 ft |
13.5 ft |
- |
Tread Width |
- |
14.1 ft |
10.83 ft |
- |
Wheel Base |
- |
22.3 ft |
19.3 ft |
- |
Width - Over Tires - With Bulge |
- |
18.8 ft |
14.75 ft |
- |
Rack Back Angle - Maximum Lift |
- |
- |
56.2 degrees |
- |
Ground to Center of Front Axle |
- |
- |
4.3 ft |
- |
Hydraulic System - Lift/Tilt |
Lift/Tilt System - Circuit |
- |
Positive Flow Control |
Positive Flow Control |
- |
Lift/Tilt System - Pump |
- |
Variable Displacement Piston |
Variable Displacement Piston |
- |
Maximum Flow at 1,700 rpm Engine Speed |
- |
541 gal/min |
- |
- |
Relief Valve Setting - Lift/Tilt |
- |
5004 psi |
5000 psi |
- |
Cylinders, Double Acting - Lift, Bore and Stroke |
- |
370 × 1713 mm (14.6 × 67.4 in) |
- |
- |
Cylinders, Double Acting - Tilt, Bore and Stroke |
- |
310 × 1086 mm (12.2 × 42.8 in) |
- |
- |
Pilot System |
- |
Open Loop and Pressure Reducing |
- |
- |
Maximum Flow at 2,165 rpm |
- |
- |
250 gal/min |
- |
Lift Cylinder - Bore |
- |
- |
9.3 in |
- |
Lift Cylinder - Stroke |
- |
- |
63.5 in |
- |
Tilt Cylinder - Bore |
- |
- |
11.5 in |
- |
Tilt Cylinder - Stroke |
- |
- |
41.5 in |
- |
Hydraulic Cycle Times |
Rack Back |
- |
4.9 s |
2.3 s |
- |
Raise |
- |
12.6 s |
9 s |
- |
Dump |
- |
3.1 s |
2.6 s |
- |
Lower Float Down |
- |
4.2 s |
- |
- |
Rack Back - High Lift |
- |
- |
2.3 s |
- |
Raise - High Lift |
- |
- |
9 s |
- |
Dump - High Lift |
- |
- |
2.6 s |
- |
Float Down |
- |
- |
3.2 s |
- |
Float Down - High Lift |
- |
- |
3.2 s |
- |
Total Hydraulic Cycle Time |
- |
- |
17.1 s |
- |
Brakes |
Brakes |
- |
ISO 3450:2011 |
ISO 3450:2011 |
- |
Buckets |
Bucket Capacities |
- |
- |
11.5-24.5 m³ (15-32 yd³) |
- |