Compare

Compare Equipment Go Back

Engine
	903D Compact Wheel Loader View Product	992 Wheel Loader View Product Remove	988 XE Wheel Loader View Product Remove
Maximum Gross Power	42 HP	-	-
Engine Model	Cat C2.4*	Cat® C32B	Cat® C18 ™
Gross Power	42 HP	-	-
Net Power - 2,200 rpm - SAE J1349 R-ing	40 HP	-	-
Net Power - 2,200 rpm - ISO 9249 R-ing	40 HP	-	-
Bore	3.4 in	5.7 in	5.7 in
Stroke	4 in	6.4 in	7.2 in
Displacement	147 in²	1963.5 in³	1105 in³
Note	*Engine meets U.S. EPA Tier 4 Final emission standards.	-	-
Net Power	-	814 HP	-
Emissions	-	U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent	U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014
Rated Speed	-	1750 rpm	1,700 rpm
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard	-	900 HP	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient	-	937 HP	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard	-	907 HP	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient	-	944 HP	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard	-	884 HP	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient	-	921 HP	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard	-	893 HP	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient	-	931 HP	-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard	-	814 HP	-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient	-	814 HP	-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard	-	823 HP	-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient	-	823 HP	-
Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm	-	3514 ft·lbf	-
Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm	-	3555 ft·lbf	-
Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm	-	3537 ft·lbf	-
Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm	-	3570 ft·lbf	-
Net Power - SAE J1349	-	-	538 HP
Engine Power - ISO 14396:2002	-	-	580 HP
Gross Power - SAE J1995:2014	-	-	588 HP
Peak Power Speed	-	-	1,500 rpm
Peak Torque - 1,200 rpm - SAE J1995	-	-	2230 ft·lbf
Torque Rise	-	-	58%
Weights
Operating Weight	9414 lb	-	-
Buckets
Bucket Capacities	0.6-1.0 m3 (0.8-1.3 yd3)	11.5-24.5 m³ (15-32 yd³)	4.7-13 m3 (6.2-17 yd3)
Bucket Capacities - General Purpose	0.6 m3 (0.8 yd3)	-	-
Bucket Capacities - Light Material	1.0 m3 (1.3 yd3)	-	-
Transmission
Travel Speed	12.4 mile/h	-	-
Transmission Type	-	Cat Planetary Powershift	Cat switched reluctance electric drive
Forward - 1	-	4.3 mile/h	-
Forward - 2	-	7.4 mile/h	-
Forward - 3	-	12.7 mile/h	-
Direct Drive - Forward 1	-	Disabled	-
Direct Drive - Forward 2	-	8 mile/h	-
Direct Drive - Forward 3	-	14 mile/h	-
Reverse - 1	-	4.7 mile/h	-
Reverse - 2	-	8.1 mile/h	-
Reverse - 3	-	13.9 mile/h	-
Direct Drive - Reverse 1	-	5 mile/h	-
Direct Drive - Reverse 2	-	8.8 mile/h	-
Direct Drive - Reverse 3	-	15.3 mile/h	-
Forward 1 (virtual)	-	-	4.3 mile/h
Forward 2 (virtual)	-	-	7 mile/h
Forward 3 (virtual)	-	-	13.8 mile/h
Forward 4 (virtual)	-	-	20 mile/h
Reverse 1 (virtual)	-	-	4.3 mile/h
Reverse 2 (virtual)	-	-	7 mile/h
Reverse 3 (virtual)	-	-	17.5 mile/h
Hydraulic System
Main Relief	3481 psi	-	-
3rd Auxiliary Flow	14 gal/min	-	-
Hydraulic Cycle Time - Lower, Float	2.4 s	-	-
Loader Hydraulic System
Hydraulic Cycle Time - Lift	4.4 s	-	-
Hydraulic Cycle Time - Dump	0.7 s	-	-
Cab
ROPS	ISO 3471:2008	-	-
FOPS	ISO 3449:2005 Level I	-	-
Service Refill Capacities
Cooling System	3 gal (US)	-	-
Fuel Tank	11.4 gal (US)	385.7 gal (US)	147 gal (US)
Hydraulic System	6.3 gal (US)	-	-
Engine Oil	2.4 gal (US)	-	-
Cooling Systems	-	59.4 gal (US)	-
Crankcase	-	31.7 gal (US)	-
Transmission	-	51.5 gal (US)	16 gal (US)
Differential - Final Drives - Front	-	96.4 gal (US)	49 gal (US)
Differential - Final Drives - Rear	-	96.4 gal (US)	49 gal (US)
Hydraulic System Factory Fill (Implement)	-	104.1 gal (US)	-
Hydraulic Tank - Implement	-	60.2 gal (US)	-
Hydraulic Factory Fill (Steering)	-	32.5 gal (US)	-
Hydraulic Tank (Steering Tank Only)	-	26.3 gal (US)	-
Cooling System - Jacket Water	-	-	30 gal (US)
Cooling Systems - Power Train	-	-	8 gal (US)
Engine Crankcase	-	-	16 gal (US)
Diesel Exhaust Fluid Tank	-	-	8.7 gal (US)
Hydraulic System - Implement/Steering	-	-	126 gal (US)
Note	-	-	All nonroad Tier 4 Final/Stage V diesel engines are required to use: – The machine has the flexibility to run on either ultra-low-sulfur diesel fuel (ULSD with 15 ppm of sulfur or less). – Cat engines are compatible with the following renewable, alternati
Dimensions (Approximate) - Standard Lift
Cab Height	8.25 ft	-	-
Ground Clearance	10 in	-	-
Wheel Base	6.42 ft	-	14.9 ft
Overall Length - With Bucket*	15.75 ft	-	-
Reach at Maximum Dump Height*	2.33 ft	-	-
Dig Depth	6 in	-	-
Maximum Dump Height*	7.5 ft	-	-
Load Over Height	9.17 ft	-	-
Hinge Pin at Maximum Height	10.08 ft	-	-
Departure Angle - Degrees	30°	-	-
Overall Length - With Forks	17.08 ft	-	-
Reach - Ground Level	2.67 ft	-	-
Maximum Reach	4.5 ft	-	-
Fork Depth Above Ground	2 in	-	-
Fork Height at Maximum Reach	4.67 ft	-	-
Maximum Fork Height	9.83 ft	-	-
Fork Reach at Maximum Height	2 ft	-	-
Turning Radius - Over Bucket*	13.17 ft	-	-
Turning Radius - Inside Tire**	5.92 ft	-	-
Width - Over Bucket*	5.83 ft	-	-
Tire Gauge	4.33 ft	-	-
Machine Width**	5.58 ft	-	-
Articulation Angle	40°	-	-
Steering Angle	80°	-	-
Dump Angle at Maximum Height	40°	-	-
Note (1)	*Vary with bucket size.	-	-
Note (2)	**Vary with tire size.	-	-
Note (3)	Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.	-	-
Ground to Top of ROPS	-	-	13.8 ft
Ground to Top of Exhaust Stacks	-	-	14.8 ft
Ground to Top of Hood	-	-	10.9 ft
Ground to Bumper Clearance	-	-	3.1 ft
Rear Axle - Centerline to Bumper	-	-	10.5 ft
Front Axle Centerline to Bucket Tip	-	-	14 ft
Maximum Overall Length	-	-	39.3 ft
Ground to Lower Hitch Clearance	-	-	1.9 ft
Ground to Center of Axles	-	-	3.2 ft
Clearance at Maximum Lift	-	-	11.9 ft
B-Pin Height - Maximum Lift	-	-	18 ft
Maximum Overall Height - Bucket Raised	-	-	24.5 ft
Reach - Maximum Lift	-	-	6.5 ft
Note	-	-	Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
Dimensions (Approximate) - High Lift
Cab Height	8.25 ft	-	-
Ground Clearance	10 in	-	-
Wheel Base	6.42 ft	-	14.9 ft
Overall Length - With Bucket*	16.17 ft	-	-
Reach at Maximum Dump Height*	2.42 ft	-	-
Dig Depth	8 in	-	-
Maximum Dump Height*	8 ft	-	-
Load Over Height	9.67 ft	-	-
Hinge Pin at Maximum Height	10.58 ft	-	-
Departure Angle - Degrees	30°	-	-
Overall Length - With Forks	17.58 ft	-	-
Reach - Ground Level	3.25 ft	-	-
Maximum Reach	4.92 ft	-	-
Fork Depth Above Ground	2 in	-	-
Fork Height at Maximum Reach	4.67 ft	-	-
Maximum Fork Height	10.33 ft	-	-
Fork Reach at Maximum Height	2 ft	-	-
Turning Radius - Over Bucket*	13.42 ft	-	-
Turning Radius - Inside Tire**	5.92 ft	-	-
Width - Over Bucket*	5.83 ft	-	-
Tire Gauge	4.33 ft	-	-
Machine Width**	5.58 ft	-	-
Articulation Angle	40°	-	-
Steering Angle	80°	-	-
Dump Angle at Maximum Height	40°	-	-
Note (1)	*Vary with bucket size.	-	-
Note (2)	**Vary with tire size.	-	-
Note (3)	Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.	-	-
Ground to Top of ROPS	-	-	13.8 ft
Ground to Top of Exhaust Stacks	-	-	14.8 ft
Ground to Top of Hood	-	-	10.9 ft
Ground to Bumper Clearance	-	-	3.1 ft
Rear Axle - Centerline to Bumper	-	-	10.5 ft
Front Axle Centerline to Bucket Tip	-	-	15.3 ft
Maximum Overall Length	-	-	40.7 ft
Ground to Lower Hitch Clearance	-	-	1.9 ft
Ground to Center of Axles	-	-	3.2 ft
Clearance at Maximum Lift	-	-	13.3 ft
B-Pin Height - Maximum Lift	-	-	19.3 ft
Maximum Overall Height - Bucket Raised	-	-	25.8 ft
Reach - Maximum Lift	-	-	6.8 ft
Note	-	-	Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
Operating Specifications - Standard Lift
Tire Size	33 × 15.5-16.5, 12 PR	-	-
Rated Bucket Capacity	0.8 yd³	-	-
Breakout Force	6160 lbf	-	-
Operating Weight	9414 lb	-	-
Rated Operating Load at Full Turn - Bucket***	2701 lb	-	-
Straight Tipping Load - Bucket***	6415 lb	-	-
Full Turn Static Tipping Load - Bucket (ISO 14397-1)**	5401 lb	-	-
Full Turn Static Tipping Load - Bucket (Rigid Tire)*	5512 lb	-	-
Rack Back - Transport Position	51°	-	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***	3366 lb	-	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***	2524 lb	-	-
Note (1)	*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.	-	-
Note (2)	**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.	-	-
Note (3)	***Manual quick coupler, precleaner hood.	-	-
Note (4)	Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.	-	-
Operating Specifications - High Lift
Tire Size	33 × 15.5-16.5, 12 PR	-	-
Rated Bucket Capacity	0.8 yd³	-	-
Breakout Force	6204 lbf	-	-
Operating Weight	9462 lb	-	-
Rated Operating Load at Full Turn - Bucket***	2502 lb	-	-
Straight Tipping Load - Bucket***	5975 lb	-	-
Full Turn Static Tipping Load - Bucket (ISO 14397-1)**	5004 lb	-	-
Full Turn Static Tipping Load - Bucket (Rigid Tire)*	5115 lb	-	-
Rack Back - Transport Position	51°	-	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***	3148 lb	-	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***	2361 lb	-	-
Note (1)	*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.	-	-
Note (2)	**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.	-	-
Note (3)	***Manual quick coupler, precleaner hood.	-	-
Note (4)	Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.	-	-
Maximum Material Densities - General Purpose
Bucket Type	General Purpose	-	-
Rated Capacity	0.8 yd³	-	-
Dump Height	90 in	-	-
Maximum Material Density	3169 lb/yd³	-	-
Bucket Width	70 in	-	-
Note	Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.	-	-
Maximum Material Densities - Light Material
Bucket Type	Light Material	-	-
Rated Capacity	1.3 yd³	-	-
Dump Height	85 in	-	-
Maximum Material Density	1989 lb/yd³	-	-
Bucket Width	74 in	-	-
Note	Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.	-	-
Sustainability
Recyclability	97%	-	96%
Operating Specifications
Operating Weight	-	233430 lb	116362 lb
Rated Payload - Standard	-	25.5 ton (US)	-
Rated Payload - Standard (Material Handler)	-	30 ton (US)	-
Rated Payload - High Lift	-	22.5 ton (US)	-
Rated Payload - High Lift (Material Handler)	-	27 ton (US)	-
Bucket Capacity Range	-	11.5-24.5 m³ (15-32 yd³)	4.7-13 m3 (6.2-17 yd3)
Cat Truck Match - Standard	-	775/777	-
Cat Truck Match - High Lift	-	785	-
Operating Weight - Standard	-	-	116362 lb
Operating Weight - High Lift	-	-	119618 lb
Rated Payload - Standard (Quarry Face)	-	-	12.5 ton (US)
Rated Payload - Loose Material (Standard)	-	-	16 ton (US)
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	-	Positive Flow Control	EH-Positive Flow Control, Flow Sharing
Lift/Tilt System - Pump	-	Variable Displacement Piston	Variable displacement piston
Maximum Flow at 2,165 rpm	-	250 gal/min	-
Relief Valve Setting - Lift/Tilt	-	5000 psi	4757 psi
Lift Cylinder - Bore	-	9.3 in	8.7 in
Lift Cylinder - Stroke	-	63.5 in	41.3 in
Tilt Cylinder - Bore	-	11.5 in	8.7 in
Tilt Cylinder - Stroke	-	41.5 in	27 in
Maximum Flow at 1,400-1,600 rpm	-	-	153 gal/min
Hydraulic Cycle Times
Rack Back	-	2.3 s	4.5 s
Rack Back - High Lift	-	2.3 s	-
Raise	-	9 s	8 s
Raise - High Lift	-	9 s	-
Dump	-	2.6 s	2.2 s
Dump - High Lift	-	2.6 s	-
Float Down	-	3.2 s	-
Float Down - High Lift	-	3.2 s	-
Total Hydraulic Cycle Time	-	17.1 s	18.2 s
Lower Float Down	-	-	3.5 s
Axles
Front	-	Fixed	Fixed
Rear	-	Trunnion	Trunnion
Oscillation Angle	-	±9°	13°
Brakes
Brakes	-	ISO 3450:2011	ISO 3450:2011
Hydraulic System - Steering
Steering System - Circuit	-	Pilot, Load Sensing	Pilot, load sensing
Steering System - Pump	-	Piston, Variable Displacement	Piston, variable displacement
Maximum Flow at 1,400-1,850 rpm	-	70 gal/min	-
Steering Cut Off Pressure	-	4500 psi	4351 psi
Total Steering Angle	-	80°	86°
Steering Cycle Times - Low Idle	-	4.9 s	5.6 s
Steering Cycle Times - High Idle	-	3.1 s	3.4 s
Maximum Flow at 1,400-1,600 rpm	-	-	71.3 gal/min
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard	-	109.4 °F	-
Ambient Capability, Hydraulically Driven Demand Fan - High	-	131 °F	-
Sound Performance - Standard
Note	-	Machine Sound Level (ISO 6396:2008) - 116 dB(A)	-
Sound Performance - Suppression
Note	-	Machine Sound Level (ISO 6396:2008) - 113 dB(A)	-
Dimensions - Standard Lift - Approximate
Ground to Top of Exhaust Stacks	-	17 ft	-
Ground to Top of ROPS	-	18.3 ft	-
Ground to Top of Hood	-	13.1 ft	-
Ground to Center of Front Axle	-	4.3 ft	-
Ground to Bumper Clearance	-	3.8 ft	-
Ground to Lower Hitch Clearance	-	2.2 ft	-
Reach - Maximum Lift	-	8.2 ft	-
Clearance at Maximum Lift	-	15.2 ft	-
B-Pin Height - Maximum Lift	-	22.8 ft	-
Maximum Overall Height - Bucket Raised	-	30.8 ft	-
Rear Axle - Centerline to Bumper	-	13.5 ft	-
Tread Width	-	10.83 ft	-
Rack Back Angle - Maximum Lift	-	56.9 degrees	-
Dump Angle at Maximum Lift	-	-49.5 degrees	-
Rack Back Angle - Ground Level	-	40.2 degrees	-
Width - Over Tires - With Bulge	-	14.74 ft	-
Rack Back Angle - Carry	-	48.9 degrees	-
Wheel Base	-	19.3 ft	-
Maximum Overall Length	-	50.8 ft	-
Front Axle Centerline to Bucket Tip	-	18 ft	-
Dimensions - High Lift - Approximate
Tread Width	-	10.83 ft	-
Rack Back Angle - Ground Level	-	42.5 degrees	-
Dump Angle at Maximum Lift	-	-48.1 degrees	-
Rack Back Angle - Maximum Lift	-	56.2 degrees	-
Width - Over Tires - With Bulge	-	14.75 ft	-
Rack Back Angle - Carry	-	51.6 degrees	-
Ground to Top of Exhaust Stacks	-	17 ft	-
Ground to Top of ROPS	-	18.3 ft	-
Ground to Top of Hood	-	13.1 ft	-
Ground to Center of Front Axle	-	4.3 ft	-
Ground to Bumper Clearance	-	3.8 ft	-
Ground to Lower Hitch Clearance	-	2.2 ft	-
Reach - Maximum Lift	-	7.6 ft	-
Clearance at Maximum Lift	-	17.2 ft	-
B-Pin Height - Maximum Lift	-	24.5 ft	-
Maximum Overall Height - Bucket Raised	-	32 ft	-
Rear Axle - Centerline to Bumper	-	13.5 ft	-
Wheel Base	-	19.3 ft	-
Maximum Overall Length	-	51.6 ft	-
Front Axle Centerline to Bucket Tip	-	18.8 ft	-
Air Conditioning System
Air Conditioning	-	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Operator's Cab
ROPS/FOPS	-	-	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
Sound Performance - Tier 4 Final / Stage V - Standard
Operator Sound Pressure Level (ISO 6396:2008)	-	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)	-	-	109 dB(A)
Sound Performance - Tier 3 / Stage III - Standard
Operator Sound Pressure Level (ISO 6396:2008)	-	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)	-	-	110 dB(A)
Dimensions - Millyard Linkage
Ground to Top of ROPS	-	-	13.8 ft
Ground to Top of Exhaust Stacks	-	-	13.8 ft
Ground to Top of Hood	-	-	10.9 ft
Ground to Bumper Clearance	-	-	3.1 ft
Rear Axle - Centerline to Bumper	-	-	10.5 ft
Front Axle Centerline to Fork Tip	-	-	16.5 ft
Wheel Base	-	-	14.9 ft
Maximum Overall Length	-	-	41.9 ft
Ground to Lower Hitch Clearance	-	-	1.9 ft
Ground to Center of Front Axle	-	-	3.2 ft
Fork Height with Level Arms	-	-	8.1 ft
Fork Top Clamp Opening	-	-	13.1 ft
Fork Height at Maximum Lift	-	-	17.2 ft
Hinge Pin Height at Maximum Lift	-	-	16.1 ft
Dump Angle at Maximum Lift	-	-	-39.4 °

Compare Equipment Go Back

903D Compact Wheel Loader

992 Wheel Loader

988 XE Wheel Loader

Engine

Weights

Buckets

Transmission

Hydraulic System

Loader Hydraulic System

Cab

Service Refill Capacities

Dimensions (Approximate) - Standard Lift

Dimensions (Approximate) - High Lift

Operating Specifications - Standard Lift

Operating Specifications - High Lift

Maximum Material Densities - General Purpose

Maximum Material Densities - Light Material

Sustainability

Operating Specifications

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Axles

Brakes

Hydraulic System - Steering

Cooling System

Sound Performance - Standard

Sound Performance - Suppression

Dimensions - Standard Lift - Approximate

Dimensions - High Lift - Approximate

Air Conditioning System

Operator's Cab

Sound Performance - Tier 4 Final / Stage V - Standard

Sound Performance - Tier 3 / Stage III - Standard

Dimensions - Millyard Linkage

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us