CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    903D Compact Wheel Loader
    View Product
    995 Wheel Loader
    View Product Remove
    980 XE
    View Product Remove
    988 XE Wheel Loader
    View Product Remove

    Engine
    Maximum Gross Power 42 HP - - -
    Engine Model Cat C2.4* Cat® 3516E Cat C13 Cat® C18 ™
    Gross Power 42 HP - - -
    Net Power - 2,200 rpm - SAE J1349 R-ing 40 HP - - -
    Net Power - 2,200 rpm - ISO 9249 R-ing 40 HP - - -
    Bore 3.4 in 6.7 in - 5.7 in
    Stroke 4 in 8.5 in - 7.2 in
    Displacement 147 in² 4766 in³ - 1105 in³
    Note *Engine meets U.S. EPA Tier 4 Final emission standards. - - -
    Emissions - U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent - U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014
    Engine Power - ISO 14396 - 1847 HP - -
    Gross Power - SAE J1995 - 1870 HP - -
    Net Power - SAE J1349 - Standard Ambient - 1739 HP - -
    Net Power - SAE J1349 - High Ambient - 1696 HP - -
    Peak Torque - 1,200 rpm - SAE J1995 - 8549 lb/ft - 2230 ft·lbf
    Torque Rise - 39% - 58%
    Note (1) - The power ratings apply when tested under the reference conditions for the specified standard. Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 214 emission standards. -
    Note (2) - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. -
    Note (3) - The gross power advertised is with the fan at maximum speed. Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h -
    Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 - - 393 HP -
    Gross Torque @ 1,200 rpm – SAE J1995:2014 - - 1627 lb/ft -
    Engine Torque @ 1,200 rpm – ISO 14396:2002 - - 1612 lb/ft -
    Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 - - 1539 lb/ft -
    Engine Power @ 1,700 rpm – ISO 14396:2002 - - 420 HP -
    Gross Power @ 1,700 rpm – SAE J1995:2014 - - 425 HP -
    Net Power - SAE J1349 - - - 538 HP
    Engine Power - ISO 14396:2002 - - - 580 HP
    Gross Power - SAE J1995:2014 - - - 588 HP
    Rated Speed - - - 1,700 rpm
    Peak Power Speed - - - 1,500 rpm

    Weights
    Operating Weight 9414 lb - 66877 lb -
    Note - - Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s -

    Buckets
    Bucket Capacities 0.6-1.0 m3 (0.8-1.3 yd3) - - 4.7-13 m3 (6.2-17 yd3)
    Bucket Capacities - General Purpose 0.6 m3 (0.8 yd3) - - -
    Bucket Capacities - Light Material 1.0 m3 (1.3 yd3) - - -

    Transmission
    Travel Speed 12.4 mile/h - - -
    Transmission Type - Cat Planetary Power Shift - Cat switched reluctance electric drive
    Forward - 1 - 4.6 mile/h 4.4 mile/h -
    Forward - 2 - 8 mile/h 8.4 mile/h -
    Forward - 3 - 13.6 mile/h 14.9 mile/h -
    Reverse - 1 - 5 mile/h 5 mile/h -
    Reverse - 2 - 8.8 mile/h 9.6 mile/h -
    Reverse - 3 - 14.9 mile/h 18.3 mile/h -
    Direct Drive - Forward 1 - Lock-up disables - -
    Direct Drive - Forward 2 - 8.7 mile/h - -
    Direct Drive - Forward 3 - 15.2 mile/h - -
    Direct Drive - Reverse 1 - Lock-up disables - -
    Direct Drive - Reverse 2 - 9.6 mile/h - -
    Direct Drive - Reverse 3 - 16.8 mile/h - -
    Note - Travel speeds based on 58/85-57 tires. Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius. -
    Forward - 4 - - 24.5 mile/h -
    Forward 1 (virtual) - - - 4.3 mile/h
    Forward 2 (virtual) - - - 7 mile/h
    Forward 3 (virtual) - - - 13.8 mile/h
    Forward 4 (virtual) - - - 20 mile/h
    Reverse 1 (virtual) - - - 4.3 mile/h
    Reverse 2 (virtual) - - - 7 mile/h
    Reverse 3 (virtual) - - - 17.5 mile/h

    Hydraulic System
    Main Relief 3481 psi - - -
    3rd Auxiliary Flow 14 gal/min - - -
    Hydraulic Cycle Time - Lower, Float 2.4 s - - -
    Implement System - Maximum Operating Pressure - - 4975 psi -
    Hydraulic Cycle Time - Total - - 10.1 seconds -

    Loader Hydraulic System
    Hydraulic Cycle Time - Lift 4.4 s - - -
    Hydraulic Cycle Time - Dump 0.7 s - - -

    Cab
    ROPS ISO 3471:2008 - - -
    FOPS ISO 3449:2005 Level I - - -

    Service Refill Capacities
    Cooling System 3 gal (US) - 13.7 gal (US) -
    Fuel Tank 11.4 gal (US) - 112.5 gal (US) 147 gal (US)
    Hydraulic System 6.3 gal (US) - - -
    Engine Oil 2.4 gal (US) - - -
    Crankcase - - 9.8 gal (US) -
    DEF Tank - - 5.5 gal (US) -
    Differential - Final Drives - Front - - 24.3 gal (US) 49 gal (US)
    Differential - Final Drives - Rear - - 24.3 gal (US) 49 gal (US)
    Hydraulic Tank - - 40.4 gal (US) -
    Transmission - - 20.3 gal (US) 16 gal (US)
    Cooling System - Jacket Water - - - 30 gal (US)
    Cooling Systems - Power Train - - - 8 gal (US)
    Engine Crankcase - - - 16 gal (US)
    Diesel Exhaust Fluid Tank - - - 8.7 gal (US)
    Hydraulic System - Implement/Steering - - - 126 gal (US)
    Note - - - All nonroad Tier 4 Final/Stage V diesel engines are required to use: – The machine has the flexibility to run on either ultra-low-sulfur diesel fuel (ULSD with 15 ppm of sulfur or less). – Cat engines are compatible with the following renewable, alternati

    Dimensions (Approximate) - Standard Lift
    Cab Height 8.25 ft - - -
    Ground Clearance 10 in - - -
    Wheel Base 6.42 ft - - 14.9 ft
    Overall Length - With Bucket* 15.75 ft - - -
    Reach at Maximum Dump Height* 2.33 ft - - -
    Dig Depth 6 in - - -
    Maximum Dump Height* 7.5 ft - - -
    Load Over Height 9.17 ft - - -
    Hinge Pin at Maximum Height 10.08 ft - - -
    Departure Angle - Degrees 30° - - -
    Overall Length - With Forks 17.08 ft - - -
    Reach - Ground Level 2.67 ft - - -
    Maximum Reach 4.5 ft - - -
    Fork Depth Above Ground 2 in - - -
    Fork Height at Maximum Reach 4.67 ft - - -
    Maximum Fork Height 9.83 ft - - -
    Fork Reach at Maximum Height 2 ft - - -
    Turning Radius - Over Bucket* 13.17 ft - - -
    Turning Radius - Inside Tire** 5.92 ft - - -
    Width - Over Bucket* 5.83 ft - - -
    Tire Gauge 4.33 ft - - -
    Machine Width** 5.58 ft - - -
    Articulation Angle 40° - - -
    Steering Angle 80° - - -
    Dump Angle at Maximum Height 40° - - -
    Note (1) *Vary with bucket size. - - -
    Note (2) **Vary with tire size. - - -
    Note (3) Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner. - - -
    Ground to Top of ROPS - - - 13.8 ft
    Ground to Top of Exhaust Stacks - - - 14.8 ft
    Ground to Top of Hood - - - 10.9 ft
    Ground to Bumper Clearance - - - 3.1 ft
    Rear Axle - Centerline to Bumper - - - 10.5 ft
    Front Axle Centerline to Bucket Tip - - - 14 ft
    Maximum Overall Length - - - 39.3 ft
    Ground to Lower Hitch Clearance - - - 1.9 ft
    Ground to Center of Axles - - - 3.2 ft
    Clearance at Maximum Lift - - - 11.9 ft
    B-Pin Height - Maximum Lift - - - 18 ft
    Maximum Overall Height - Bucket Raised - - - 24.5 ft
    Reach - Maximum Lift - - - 6.5 ft
    Note - - - Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.

    Dimensions (Approximate) - High Lift
    Cab Height 8.25 ft - - -
    Ground Clearance 10 in - - -
    Wheel Base 6.42 ft - - 14.9 ft
    Overall Length - With Bucket* 16.17 ft - - -
    Reach at Maximum Dump Height* 2.42 ft - - -
    Dig Depth 8 in - - -
    Maximum Dump Height* 8 ft - - -
    Load Over Height 9.67 ft - - -
    Hinge Pin at Maximum Height 10.58 ft - - -
    Departure Angle - Degrees 30° - - -
    Overall Length - With Forks 17.58 ft - - -
    Reach - Ground Level 3.25 ft - - -
    Maximum Reach 4.92 ft - - -
    Fork Depth Above Ground 2 in - - -
    Fork Height at Maximum Reach 4.67 ft - - -
    Maximum Fork Height 10.33 ft - - -
    Fork Reach at Maximum Height 2 ft - - -
    Turning Radius - Over Bucket* 13.42 ft - - -
    Turning Radius - Inside Tire** 5.92 ft - - -
    Width - Over Bucket* 5.83 ft - - -
    Tire Gauge 4.33 ft - - -
    Machine Width** 5.58 ft - - -
    Articulation Angle 40° - - -
    Steering Angle 80° - - -
    Dump Angle at Maximum Height 40° - - -
    Note (1) *Vary with bucket size. - - -
    Note (2) **Vary with tire size. - - -
    Note (3) Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner. - - -
    Ground to Top of ROPS - - - 13.8 ft
    Ground to Top of Exhaust Stacks - - - 14.8 ft
    Ground to Top of Hood - - - 10.9 ft
    Ground to Bumper Clearance - - - 3.1 ft
    Rear Axle - Centerline to Bumper - - - 10.5 ft
    Front Axle Centerline to Bucket Tip - - - 15.3 ft
    Maximum Overall Length - - - 40.7 ft
    Ground to Lower Hitch Clearance - - - 1.9 ft
    Ground to Center of Axles - - - 3.2 ft
    Clearance at Maximum Lift - - - 13.3 ft
    B-Pin Height - Maximum Lift - - - 19.3 ft
    Maximum Overall Height - Bucket Raised - - - 25.8 ft
    Reach - Maximum Lift - - - 6.8 ft
    Note - - - Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.

    Operating Specifications - Standard Lift
    Tire Size 33 × 15.5-16.5, 12 PR - - -
    Rated Bucket Capacity 0.8 yd³ - - -
    Breakout Force 6160 lbf - - -
    Operating Weight 9414 lb - - -
    Rated Operating Load at Full Turn - Bucket*** 2701 lb - - -
    Straight Tipping Load - Bucket*** 6415 lb - - -
    Full Turn Static Tipping Load - Bucket (ISO 14397-1*)*** 5401 lb - - -
    Full Turn Static Tipping Load - Bucket (Rigid Tire**)*** 5512 lb - - -
    Rack Back - Transport Position 51° - - -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)*** 3366 lb - - -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)*** 2524 lb - - -
    Note (1) *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing. - - -
    Note (2) **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. - - -
    Note (3) ***Manual quick coupler, precleaner hood. - - -
    Note (4) Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted. - - -

    Operating Specifications - High Lift
    Tire Size 33 × 15.5-16.5, 12 PR - - -
    Rated Bucket Capacity 0.8 yd³ - - -
    Breakout Force 6204 lbf - - -
    Operating Weight 9462 lb - - -
    Rated Operating Load at Full Turn - Bucket*** 2502 lb - - -
    Straight Tipping Load - Bucket*** 5975 lb - - -
    Full Turn Static Tipping Load - Bucket (ISO 14397-1*)*** 5004 lb - - -
    Full Turn Static Tipping Load - Bucket (Rigid Tire**)*** 5115 lb - - -
    Rack Back - Transport Position 51° - - -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)*** 3148 lb - - -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)*** 2361 lb - - -
    Note (1) *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing. - - -
    Note (2) **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. - - -
    Note (3) ***Manual quick coupler, precleaner hood. - - -
    Note (4) Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted. - - -

    Maximum Material Densities - General Purpose
    Bucket Type General Purpose - - -
    Rated Capacity 0.8 yd³ - - -
    Dump Height 90 in - - -
    Maximum Material Density 3169 lb/yd³ - - -
    Bucket Width 70 in - - -
    Note Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage. - - -

    Maximum Material Densities - Light Material
    Bucket Type Light Material - - -
    Rated Capacity 1.3 yd³ - - -
    Dump Height 85 in - - -
    Maximum Material Density 1989 lb/yd³ - - -
    Bucket Width 74 in - - -
    Note Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage. - - -

    Sustainability
    Recyclability 97% - 98% 96%

    Operating Specifications
    Operating Weight - Standard - 543772 lb - 116362 lb
    Bucket Capacity Range - 17.2-43.6 m3 (22.3-57 yd3) - 4.7-13 m3 (6.2-17 yd3)
    Operating Weight - High Lift - 547675 lb - 119618 lb
    Rated Payload - Standard Lift (Low to Moderate Digging Resistance) - 60 ton (US) - -
    Rated Payload - Standard Lift (Moderate to High Digging Resistance) - 50 ton (US) - -
    Rated Payload - High Lift (Low to Moderate Digging Resistance) - 55 ton (US) - -
    Rated Payload - High Lift (Moderate to High Digging Resistance) - 50 ton (US) - -
    Note - *Please contact your local dealer to determine if your application is suitable for this increased rated payload. - -
    Cat Truck Match - Standard - 785/789 - -
    Cat Truck Match - High Lift - 789/793/794 - -
    Breakout Force - - 51008 lbf -
    Note (1) - - For a machine configuration as defined under Weight. -
    Note (2) - - Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. -
    Static Tipping Load - Full 40° Turn - No Tire Deflection - - 20965 kg -
    Static Tipping Load - Full 40° Turn - With Tire Deflection - - 43432 lb -
    Operating Weight - - - 116362 lb
    Rated Payload - Standard (Quarry Face) - - - 12.5 ton (US)
    Rated Payload - Loose Material (Standard) - - - 16 ton (US)

    Complete System Fill
    Fuel Tank - Standard - 856 gal (US) - -
    Fuel Tank - With 24 hr Attachment - 1414 gal (US) - -
    Cooling System - 138 gal (US) - -
    Engine Crankcase - 76 gal (US) - -
    Transmission - 110 gal (US) - -
    Differential - Final Drives - Front - 220 gal (US) - -
    Differential - Final Drives - Rear - 200 gal (US) - -
    Hydraulic Tank - Implement and Hydraulic Fan - 270 gal (US) - -
    Hydraulic Tank - Steering and Braking - 100 gal (US) - -
    Oil Renewal System (ORS)* - 20 gal (US) - -
    Note - *Not available on Tier 4 Final/Stage V machines. Not available in all regions. - -

    Axles
    Front - Fixed - Fixed
    Rear - Trunnion - Trunnion
    Oscillation Angle - 9° - 13°

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard - 109.4 °F - -
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) - 131 °F - -
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) - 127.4 °F - -

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - 74 dB(A) - -
    Machine Sound Level (ISO 6395:2008) - 119 dB(A) - -
    Note - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c - -

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - 73 dB(A) - -
    Machine Sound Level (ISO 6395:2008) - 117 dB(A) - -
    Note - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c - -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, Load Sensing - Pilot, load sensing
    Steering System - Pump - Piston, Variable Displacement - Piston, variable displacement
    Total Steering Angle - 80 degrees - 86°
    Steering Cycle Times - Low Idle - 7.6 s - 5.6 s
    Steering Cycle Times - High Idle - 4.3 s - 3.4 s
    Maximum Flow at 1,400-1,600 rpm - - - 71.3 gal/min
    Steering Cut Off Pressure - - - 4351 psi

    Dimensions - Standard Lift - Approximate
    B-Pin Height - Maximum Lift - 28.8 ft - -
    Clearance at Maximum Lift - 19.8 ft - -
    Dump Angle at Maximum Lift - –50.0 degrees - -
    Front Axle Centerline to Bucket Tip - 21.9 ft - -
    Ground to Bumper Clearance - 4.4 ft - -
    Ground to Center of Axles - 6 ft - -
    Ground to Lower Hitch Clearance - 2.9 ft - -
    Ground to Top of Exhaust Stacks - 23.2 ft - -
    Ground to Top of Hood - 18.6 ft - -
    Ground to Top of ROPS - 23.4 ft - -
    Maximum Overall Height - Bucket Raised - 39.3 ft - -
    Maximum Overall Length - 64.6 ft - -
    Note - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. - -
    Rack Angle at Maximum Lift - 59.5 degrees - -
    Rack Back Angle - Carry - 47.7 degrees - -
    Rack Back Angle - Ground Level - 39.7 degrees - -
    Reach - Maximum Lift - 9.6 ft - -
    Rear Axle - Centerline to Bumper - 20.4 ft - -
    Tread Width - 14.1 ft - -
    Wheel Base - 22.3 ft - -
    Width - Over Tires - With Bulge - 18.8 ft - -

    Dimensions - High Lift - Approximate
    B-Pin Height - Maximum Lift - 31.6 ft - -
    Clearance at Maximum Lift - 22.6 ft - -
    Dump Angle at Maximum Lift - –50.0 degrees - -
    Front Axle Centerline to Bucket Tip - 24.2 ft - -
    Ground to Bumper Clearance - 4.4 ft - -
    Ground to Center of Axles - 6 ft - -
    Ground to Lower Hitch Clearance - 2.9 ft - -
    Ground to Top of Exhaust Stacks - 23.2 ft - -
    Ground to Top of Hood - 18.6 ft - -
    Ground to Top of ROPS - 23.4 ft - -
    Maximum Overall Height - Bucket Raised - 42.1 ft - -
    Maximum Overall Length - 66.9 ft - -
    Note - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. - -
    Rack Angle at Maximum Lift - 59.4 degrees - -
    Rack Back Angle - Carry - 53.5 degrees - -
    Rack Back Angle - Ground Level - 45 degrees - -
    Reach - Maximum Lift - 9.4 ft - -
    Rear Axle - Centerline to Bumper - 20.4 ft - -
    Tread Width - 14.1 ft - -
    Wheel Base - 22.3 ft - -
    Width - Over Tires - With Bulge - 18.8 ft - -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Positive Flow Control - EH-Positive Flow Control, Flow Sharing
    Lift/Tilt System - Pump - Variable Displacement Piston - Variable displacement piston
    Maximum Flow at 1,700 rpm Engine Speed - 541 gal/min - -
    Relief Valve Setting - Lift/Tilt - 5004 psi - 4757 psi
    Cylinders, Double Acting - Lift, Bore and Stroke - 370 × 1713 mm (14.6 × 67.4 in) - -
    Cylinders, Double Acting - Tilt, Bore and Stroke - 310 × 1086 mm (12.2 × 42.8 in) - -
    Pilot System - Open Loop and Pressure Reducing - -
    Maximum Flow at 1,400-1,600 rpm - - - 153 gal/min
    Lift Cylinder - Bore - - - 8.7 in
    Lift Cylinder - Stroke - - - 41.3 in
    Tilt Cylinder - Bore - - - 8.7 in
    Tilt Cylinder - Stroke - - - 27 in

    Hydraulic Cycle Times
    Rack Back - 4.9 s - 4.5 s
    Raise - 12.6 s - 8 s
    Dump - 3.1 s - 2.2 s
    Lower Float Down - 4.2 s - 3.5 s
    Total Hydraulic Cycle Time - - - 18.2 s

    Brakes
    Brakes - ISO 3450:2011 - ISO 3450:2011

    Bucket Capacities
    Bucket Range - - 4.0-14.5 m³ 5.25-19 yd³ -

    Sound
    Note (1) - - For machines in European Union countries and in countries that adopt the EU Directives. -
    Note (2) - - European Union Directive 2000/14/EC as amended by 2005/88/EC. -
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* - - 110 -
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) - - 70 dB(A) -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) - - 107 dB(A) -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) - - 75 -
    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) - - 70 dB(A) -

    Air Conditioning System
    Air Conditioning - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Dimensions
    Note - - All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires. -

    Dimensions - High Lift
    Centerline of Rear Axle to Edge of Counterweight - - 8.9 ft -
    Centerline of Rear Axle to Hitch - - 6.3 ft -
    Ground Clearance - - 1.5 ft -
    Height - Top of Exhaust Pipe - - 12.5 ft -
    Height - Top of Hood - - 10.1 ft -
    Height - Top of ROPS - - 12.7 ft -
    Hinge Pin Height at Carry - - 2.2 ft -
    Hinge Pin Height at Maximum Lift - - 15.7 ft -
    Lift Arm Clearance at Maximum Lift - - 13.6 ft -
    Overall Length - Without Bucket - - 27.5 ft -
    Tread Width - - 8 ft -
    Wheel Base - - 12.6 ft -
    Width over Tires (Loaded) - - 10.9 ft -

    Dimensions - Standard Lift
    Centerline of Rear Axle to Edge of Counterweight - - 8.7 ft -
    Centerline of Rear Axle to Hitch - - 6.3 ft -
    Ground Clearance - - 456 mm -
    Height - Top of Exhaust Pipe - - 3764 mm -
    Height - Top of Hood - - 3064 mm -
    Height - Top of ROPS - - 3829 mm -
    Hinge Pin Height at Carry - - 2 ft -
    Hinge Pin Height at Maximum Lift - - 4554 mm -
    Lift Arm Clearance at Maximum Lift - - 3881 mm -
    Overall Length - Without Bucket - - 8155 mm -
    Tread Width - - 8 ft -
    Wheel Base - - 3800 mm -
    Width over Tires (Loaded) - - 10.9 ft -

    Operator's Cab
    ROPS/FOPS - - - ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards

    Sound Performance - Tier 4 Final / Stage V - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - - - 72 dB(A)
    Machine Sound Power Level (ISO 6395:2008) - - - 109 dB(A)

    Sound Performance - Tier 3 / Stage III - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - - - 72 dB(A)
    Machine Sound Power Level (ISO 6395:2008) - - - 110 dB(A)

    Dimensions - Millyard Linkage
    Ground to Top of ROPS - - - 13.8 ft
    Ground to Top of Exhaust Stacks - - - 13.8 ft
    Ground to Top of Hood - - - 10.9 ft
    Ground to Bumper Clearance - - - 3.1 ft
    Rear Axle - Centerline to Bumper - - - 10.5 ft
    Front Axle Centerline to Fork Tip - - - 16.5 ft
    Wheel Base - - - 14.9 ft
    Maximum Overall Length - - - 41.9 ft
    Ground to Lower Hitch Clearance - - - 1.9 ft
    Ground to Center of Front Axle - - - 3.2 ft
    Fork Height with Level Arms - - - 8.1 ft
    Fork Top Clamp Opening - - - 13.1 ft
    Fork Height at Maximum Lift - - - 17.2 ft
    Hinge Pin Height at Maximum Lift - - - 16.1 ft
    Dump Angle at Maximum Lift - - - -39.4 °
    Add a Similar Product: