|
AD63 Underground Articulated Truck
|
R1300G Underground Mining Loader
|
R2900G Underground Mining Loader
|
Engine |
| Engine Model |
Cat® C27 |
Cat® 3306B DITA |
Cat® C15 |
| Engine Power - EU Stage V Engine - ISO 14396:2002 |
795 HP |
- |
- |
| Bore |
5.4 in |
4.75 in |
5.4 in |
| Stroke |
6 in |
6 in |
6.8 in |
| Displacement |
1650 in² |
640.75 in³ |
927.9 in³ |
| Note (1) |
Meets EU Stage V emission standards and U.S. EPA Tier 4 Final. |
Power ratings apply at a rated speed of 2,200 rpm when tested under the reference conditions for the specified standard. |
Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. |
| Note (2) |
Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. |
All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat |
All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat |
| Note (3) |
All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications |
Engine derate will commence at an altitude of 4500 m (14,763.7 ft). |
No engine derating required up to 591 m (1,938 ft) altitude. |
| Engine Power - ISO 14396:2002 |
- |
157 HP |
- |
| Engine Power - Tier 3 Engine - ISO 14396:2002 |
- |
- |
401 HP |
| Engine Power - VR Engine - ISO 14396:2002 |
- |
- |
401 HP |
| Note (4) |
- |
- |
Optional Ventilation Reduction Package available. |
| Note (5) |
- |
- |
Optional Tier 3 engine package emits equivalent to U.S. EPA Tier 3 and EU Stage IIIA. |
Operating Specifications |
| Nominal Payload Capacity |
138891 lb |
14991 lb |
37920 lb |
| Gross Machine Operating Mass |
262218 lb |
- |
- |
| Body Capacities |
26.9-38.3 m³ (35.2-50.1 yd³) |
- |
- |
| Gross Machine Mass |
- |
65482 lb |
155095 lb |
| Static Tipping Load - Straight Ahead - Lift Arms Horizontal |
- |
45360 lb |
88015 lb |
| Static Tipping Load - Full Turn - Lift Arms Horizontal |
- |
39397 lb |
75109 lb |
| Breakout Force - SAE |
- |
26504 lb |
60298 lb |
Weights |
| Empty |
115577 lb |
- |
- |
| Empty - Front Axle |
81716 lb |
- |
- |
| Empty - Rear Axle |
33861 lb |
- |
- |
| Loaded |
254468 lb |
- |
- |
| Loaded - Front Axle |
126669 lb |
- |
- |
| Loaded - Rear Axle |
127800 lb |
- |
- |
| Operating Mass* |
- |
45691 lb |
110692 lb |
| Operating Mass* - Front Axle |
- |
16810 lb |
50832 lb |
| Operating Mass* - Rear Axle |
- |
28881 lb |
59860 lb |
| Operating Mass + Rated Payload* |
- |
60682 lb |
148611 lb |
| Operating Mass + Rated Payload* - Front Axle |
- |
41105 lb |
110716 lb |
| Operating Mass + Rated Payload* - Rear Axle |
- |
19577 lb |
37895 lb |
| Note |
- |
*Calculated weights. |
*Calculated Weight. |
Weight Distribution |
| Empty - Front Axle |
70.7% |
- |
- |
| Empty - Rear Axle |
29.3% |
- |
- |
| Loaded - Front Axle |
49.8% |
- |
- |
| Loaded - Rear Axle |
50.2% |
- |
- |
Transmission |
| Forward - 1 |
4.1 mile/h |
2.8 mile/h |
3.4 mile/h |
| Forward - 2 |
5.7 mile/h |
4.8 mile/h |
6 mile/h |
| Forward - 3 |
7.7 mile/h |
9.3 mile/h |
10.7 mile/h |
| Forward - 4 |
10.3 mile/h |
16.3 mile/h |
18.5 mile/h |
| Forward - 5 |
14 mile/h |
- |
- |
| Forward - 6 |
18.9 mile/h |
- |
- |
| Forward - 7 |
25.5 mile/h |
- |
- |
| Reverse - 1 |
5.3 mile/h |
2.8 mile/h |
4.1 mile/h |
| Note |
Maximum travel speeds with standard 35 × 65 R33 tires. |
- |
- |
| Reverse - 2 |
- |
4.8 mile/h |
7.3 mile/h |
| Reverse - 3 |
- |
9.2 mile/h |
13 mile/h |
| Reverse - 4 |
- |
14.3 mile/h |
22 mile/h |
Final Drives |
| Differential Ratio |
3.46:1 |
- |
- |
| Final Drive Ratio |
5.5:1 |
- |
- |
| Total Reduction Ratio |
19.04:1 |
- |
- |
Body Hoist |
| Raise |
13 s |
- |
- |
| Lower |
24 s |
- |
- |
| Total Cycle Time |
37 s |
- |
- |
Body Capacities |
| Dump Body - 1 - Standard |
35.2 yd³ |
- |
- |
| Dump Body - 2 |
42.6 yd³ |
- |
- |
| Dump Body - 3 |
44.2 yd³ |
- |
- |
| Dump Body - 4 |
47.9 yd³ |
- |
- |
| Dump Body - 5 (Light Material) |
50.1 yd³ |
- |
- |
| Note |
Heaped SAE 2:1. |
- |
- |
Turning Dimensions |
| Outside Clearance Radius |
393.9 in |
225.1 in |
288.3 in |
| Inside Turn Radius |
218.1 in |
- |
- |
| Frame Oscillation |
10° |
- |
- |
| Articulation Angle |
42.5 ° |
42.5° |
42.5° |
| Inner Clearance Radius |
- |
111.2 in |
133.2 in |
| Axle Oscillation |
- |
10° |
8° |
Service Refill Capacities |
| Engine Crankcase - With Filter |
25 gal (US) |
6.6 gal (US) |
- |
| Transmission |
14 gal (US) |
11.9 gal (US) |
16.4 gal (US) |
| Hydraulic Tank |
100.6 gal (US) |
23.2 gal (US) |
37 gal (US) |
| Cooling System |
39.6 gal (US) |
17.7 gal (US) |
19.8 gal (US) |
| Front Differential and Final Drives |
36.5 gal (US) |
10 gal (US) |
31.4 gal (US) |
| Rear Differential and Final Drives |
36.5 gal (US) |
11.1 gal (US) |
33.5 gal (US) |
| Fuel Tank |
237.7 gal (US) |
77.9 gal (US) |
- |
| Engine Crankcase |
- |
- |
9 gal (US) |
| Front Differential and Final Drives - With Axle Oil Cooling System |
- |
- |
42 gal (US) |
| Rear Differential and Final Drives - With Axle Oil Cooling System |
- |
- |
44.1 gal (US) |
| Fuel Tank - Dual |
- |
- |
376.4 gal (US) |
Tires |
| Tire Size |
35 × 65 R33 |
17.5 × R25 |
29.5 × 29 |
Standards |
| Standards |
ROPS/FOPS Certified Cab |
ROPS/FOPS Certified Cab |
- |
| Brakes |
- |
- |
ISO 3450, AS2958.1, CAN-CSA424.30-M90 |
| Cab - FOPS |
- |
- |
ISO 3449, SAE J231, AS2294.3, EN13627 |
| Cab - ROPS |
- |
- |
ISO 3471, SAE J1040, AS2294.2, EN13510 |
Hydraulic Cycle Times |
| Raise |
- |
5 s |
9.2 s |
| Dump |
- |
2 s |
3.4 s |
| Lower, Empty, Float Down |
- |
2.3 s |
3.1 s |
| Total Cycle Time |
- |
9.3 s |
15.7 s |
Bucket Capacities |
| Dump Bucket - 1 |
- |
3.2 yd³ |
8.2 yd³ |
| Dump Bucket - 2 |
- |
3.7 yd³ |
9.4 yd³ |
| Dump Bucket - 3 - Standard Bucket |
- |
4.1 yd³ |
- |
| Dump Bucket - 4 |
- |
4.4 yd³ |
11.6 yd³ |
| Ejector Bucket |
- |
3.1 yd³ |
- |
| Bucket Capacity |
- |
- |
6.3-8.9 m³ (8.2-11.6 yd³) |
| Dump Bucket - 3 |
- |
- |
10.9 yd³ |
