|
R1700 Underground Mining Loader
|
R1300G Underground Mining Loader
|
R3000H Underground Mining Loader
|
Engine |
| Engine Model |
Cat® C13 |
Cat® 3306B DITA |
Cat® C15 |
| Engine Power - Stage V Engine - ISO 14396:2002 |
345 HP |
- |
- |
| Engine Power - Tier 3 Engine - ISO 14396:2002 |
361 HP |
- |
401 HP |
| Engine Power - VR Engine - ISO 14396:2002 |
361 HP |
- |
401 HP |
| Note (1) |
Power ratings apply at a rated speed of 1,800 rpm for LRCs (VR and Tier 3/Stage IIIA) engines when tested under the reference conditions for the specified standard. |
Power ratings apply at a rated speed of 2,200 rpm when tested under the reference conditions for the specified standard. |
Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. |
| Note (2) |
Power ratings apply at a rated speed of 2,050 rpm for HRC (Stage V) engine when tested under the reference conditions for the specified standard. |
All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat |
All rating conditions are based on ISO/TR 14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifica |
| Note (3) |
All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications |
Engine derate will commence at an altitude of 4500 m (14,763.7 ft). |
No engine derating required up to 3050 m (10,006 ft) altitude for equivalent Tier 3 engines, and 3506 m (11,502 ft) for VR engines. |
| Note (4) |
No engine derating required up to 2895 m (9,500 ft) altitude for Stage V engines, 3505 m (11,500 ft) altitude for Tier 3/Stage IIIA engines, and 3200 m (10,500 ft) for Tier 2/Stage II VR engines. |
- |
Optional Ventilation Reduction package available. |
| Note (5) |
Optional Ventilation Reduction package available. |
- |
Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available. |
| Note (6) |
Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available. |
- |
- |
| Note (7) |
Optional engine meeting the U.S. EPA Tier 4 Final and EU Stage V emission standards is also available. |
- |
- |
| Engine Power - ISO 14396:2002 |
- |
157 HP |
- |
| Bore |
- |
4.75 in |
5.4 in |
| Stroke |
- |
6 in |
6.8 in |
| Displacement |
- |
640.75 in³ |
927.6 in³ |
Operating Specifications |
| Nominal Payload Capacity |
33069 lb |
14991 lb |
44092 lb |
| Gross Machine Mass - Loaded |
138316 lb |
- |
- |
| Static Tipping Load - Straight Ahead - Lift Arms Horizontal |
83218 lb |
45360 lb |
104199 lb |
| Static Tipping Load - Full Turn - Lift Arms Horizontal |
69635 lb |
39397 lb |
- |
| Breakout Force - Lift and Tilt |
53330 lb |
- |
- |
| Gross Machine Mass |
- |
65482 lb |
180779 lb |
| Breakout Force - SAE |
- |
26504 lb |
61773 lb |
| Static Tipping Full Turn Ahead Lift Arms Horizontal |
- |
- |
88191 lb |
Weights |
| Operating Mass* |
95189 lb |
45691 lb |
128448 lb |
| Operating Mass* - Front Axle |
38358 lb |
16810 lb |
54558 lb |
| Operating Mass* - Rear Axle |
56831 lb |
28881 lb |
73853 lb |
| Operating Mass + Rated Payload* |
128258 lb |
60682 lb |
172540 lb |
| Operating Mass + Rated Payload* - Front Axle |
91412 lb |
41105 lb |
125187 lb |
| Operating Mass + Rated Payload* - Rear Axle |
36846 lb |
19577 lb |
47316 lb |
| Note |
*Calculated weights. |
*Calculated weights. |
*Calculated weight. |
Transmission |
| Forward - 1 |
3 mile/h |
2.8 mile/h |
3 mile/h |
| Forward - 2 |
5.7 mile/h |
4.8 mile/h |
5.7 mile/h |
| Forward - 3 |
10.2 mile/h |
9.3 mile/h |
10.2 mile/h |
| Forward - 4 |
17.9 mile/h |
16.3 mile/h |
17.5 mile/h |
| Reverse - 1 |
3.7 mile/h |
2.8 mile/h |
4.1 mile/h |
| Reverse - 2 |
6.5 mile/h |
4.8 mile/h |
7.1 mile/h |
| Reverse - 3 |
11.6 mile/h |
9.2 mile/h |
12.7 mile/h |
| Reverse - 4 |
20.2 mile/h |
14.3 mile/h |
19.4 mile/h |
Hydraulic Cycle Times |
| Raise |
6.8 s |
5 s |
8.8 s |
| Dump |
3.3 s |
2 s |
1.85 s |
| Lower, Empty, Float Down |
2.9 s |
2.3 s |
3.54 s |
| Total Cycle Time |
13.2 s |
9.3 s |
14.2 s |
Bucket Capacities |
| Bucket Capacities |
5.7-8.6 m³ (7.5-11.2 yd³) |
- |
8.9-11.6 m³ (11.6-15.2 yd³) |
| Dump Bucket - 1 - Standard Bucket |
7.5 yd³ |
- |
11.6 yd³ |
| Dump Bucket - 2 |
8 yd³ |
3.7 yd³ |
12.4 yd³ |
| Dump Bucket - 3 |
8.6 yd³ |
- |
13.7 yd³ |
| Dump Bucket - 4 |
9.4 yd³ |
4.4 yd³ |
- |
| Dump Bucket - 5 |
9.8 yd³ |
- |
- |
| Dump Bucket - 6 |
10.5 yd³ |
- |
- |
| Light Material Bucket |
11.2 yd³ |
- |
15.2 yd³ |
| Ejector Bucket |
7.6 yd³ |
3.1 yd³ |
- |
| Bolt Together Bucket (1) |
8.9 yd³ |
- |
- |
| Bolt Together Bucket (2) |
9.8 yd³ |
- |
- |
| Dump Bucket - 1 |
- |
3.2 yd³ |
- |
| Dump Bucket - 3 - Standard Bucket |
- |
4.1 yd³ |
- |
Turning Dimensions |
| Outside Clearance Radius |
272 in |
225.1 in |
- |
| Inner Clearance Radius |
123.5 in |
111.2 in |
- |
| Axle Oscillation |
8° |
10° |
8 ° |
| Articulation Angle |
44° |
42.5° |
42.5 ° |
| Outside Clearance Radius** |
- |
- |
296.7 in |
| Inner Clearance Radius** |
- |
- |
127.8 in |
| Note |
- |
- |
**Clearance dimensions are for reference only. |
Tires |
| Tire Size |
26.5R25 |
17.5 × R25 |
35/65 R33 |
Service Refill Capacities |
| Cooling System |
19.8 gal (US) |
17.7 gal (US) |
19.8 gal (US) |
| Engine Crankcase |
9.8 gal (US) |
- |
9 gal (US) |
| Hydraulic Tank |
35.7 gal (US) |
23.2 gal (US) |
37 gal (US) |
| Engine Crankcase - With Filter |
- |
6.6 gal (US) |
- |
| Transmission |
- |
11.9 gal (US) |
16.4 gal (US) |
| Front Differential and Final Drives |
- |
10 gal (US) |
31.4 gal (US) |
| Rear Differential and Final Drives |
- |
11.1 gal (US) |
33.5 gal (US) |
| Fuel Tank |
- |
77.9 gal (US) |
406.5 gal (US) |
| Front Differential and Final Drives - With Axle Oil Cooling System |
- |
- |
42 gal (US) |
| Rear Differential and Final Drives - With Axle Oil Cooling System |
- |
- |
44.1 gal (US) |
Service Capacities - Not Refill |
| Fuel System |
128.4 gal (US) |
- |
- |
| DEF Tank |
7.1 gal (US) |
- |
- |
| Front Differential and Final Drive |
39 gal (US) |
- |
- |
| Rear Differential and Final Drive |
37.2 gal (US) |
- |
- |
| Transmission |
14.2 gal (US) |
- |
- |
Standards |
| Standards |
- |
ROPS/FOPS Certified Cab |
Rollover Protective Structure (ROPS)/Falling Object Protective Structure (FOPS) Certified Cab |
