Compare Equipment Go Back

R1600H Underground Mining Loader
R1300G Underground Mining Loader

Engine

Engine Model Cat® C11 Cat® 3306B DITA -
Engine Power - Tier 3 Engine - ISO 14396:2002 271 HP - -
Engine Power - VR Engine - ISO 14396:2002 271 HP - -
Bore 5.1 in 4.75 in -
Stroke 5.5 in 6 in -
Displacement 680.4 in³ 640.75 in³ -
Note (1) Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. Power ratings apply at a rated speed of 2,200 rpm when tested under the reference conditions for the specified standard. -
Note (2) All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat -
Note (3) No engine derating required up to 3048 m (10,000 ft) for Tier 3 Engine and 1828 m (6,000 ft) for VR Engine. Engine derate will commence at an altitude of 4500 m (14,763.7 ft). -
Note (4) Optional Ventilation Reduction package available. - -
Note (5) Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU Stage IIIA is also available. - -
Engine Power - ISO 14396:2002 - 157 HP -

Operating Specifications

Nominal Payload Capacity 22487 lb 14991 lb -
Gross Machine Mass 97453 lb 65482 lb -
Static Tipping Load - Straight Ahead - Lift Arms Horizontal 57110 lb 45360 lb -
Static Tipping Load - Full Turn - Lift Arms Horizontal 46067 lb 39397 lb -
Breakout Force - Tilt (ISO) 39524 lb - -
Breakout Force - Lift (ISO) 42333 lb - -
Breakout Force - SAE - 26504 lb -

Weights

Operating Mass* 66469 lb 45691 lb -
Operating Mass* - Front Axle 28404 lb 16810 lb -
Operating Mass* - Rear Axle 38065 lb 28881 lb -
Operating Mass + Rated Payload* 88956 lb 60682 lb -
Operating Mass + Rated Payload* - Front Axle 62011 lb 41105 lb -
Operating Mass + Rated Payload* - Rear Axle 26944 lb 19577 lb -
Note *Calculated weights. *Calculated weights. -

Transmission

Forward - 1 2.8 mile/h 2.8 mile/h -
Forward - 2 5.6 mile/h 4.8 mile/h -
Forward - 3 10.4 mile/h 9.3 mile/h -
Forward - 4 17.1 mile/h 16.3 mile/h -
Reverse - 1 3.1 mile/h 2.8 mile/h -
Reverse - 2 6.8 mile/h 4.8 mile/h -
Reverse - 3 11.8 mile/h 9.2 mile/h -
Reverse - 4 18.2 mile/h 14.3 mile/h -

Hydraulic Cycle Times

Raise 7.6 s 5 s -
Dump 1.6 s 2 s -
Lower, Empty, Float Down 2 s 2.3 s -
Total Cycle Time 11.2 s 9.3 s -

Bucket Capacities

Bucket Capacities 4.2-5.9 m³ (5.5-7.7 yd³) - -
Dump Bucket - 1 5.5 yd³ 3.2 yd³ -
Dump Bucket - 2 - Standard Bucket 6.3 yd³ - -
Dump Bucket - 3 7.3 yd³ - -
Dump Bucket - 4 7.7 yd³ 4.4 yd³ -
Ejector Bucket 6.3 yd³ 3.1 yd³ -
Bolt Together Bucket 6.9 yd³ - -
Dump Bucket - 2 - 3.7 yd³ -
Dump Bucket - 3 - Standard Bucket - 4.1 yd³ -

Turning Dimensions

Outside Clearance Radius* 261.3 in - -
Inner Clearance Radius* 129.6 in - -
Axle Oscillation 10° 10° -
Articulation Angle 42.5° 42.5° -
Note *Clearance dimensions are for reference only. - -
Outside Clearance Radius - 225.1 in -
Inner Clearance Radius - 111.2 in -

Tires

Tire Size 18 × R25 17.5 × R25 -

Service Refill Capacities

Engine Crankcase - With Filter 8.98 gal (US) 6.6 gal (US) -
Transmission 12.4 gal (US) 11.9 gal (US) -
Hydraulic Tank 33 gal (US) 23.2 gal (US) -
Cooling System 16.1 gal (US) 17.7 gal (US) -
Front Differential and Final Drives 21.1 gal (US) 10 gal (US) -
Rear Differential and Final Drives 21.1 gal (US) 11.1 gal (US) -
Fuel Tank 105.7 gal (US) 77.9 gal (US) -
Secondary Fuel Tank - If Equipped 87.2 gal (US) - -

Standards

Standards ROPS/FOPS Certified Cab ROPS/FOPS Certified Cab -
Add a Similar Product:
  • R2900G Underground Mining Loader Add
  • R3000H Underground Mining Loader Add
  • R1700 Underground Mining Loader Add