Compare Equipment Go Back
R1600H Underground Mining Loader |
R1700 Underground Mining Loader |
R1300G Underground Mining Loader |
R3000H Underground Mining Loader |
|
Engine |
||||
---|---|---|---|---|
Engine Model | Cat® C11 | Cat® C13 | Cat® 3306B DITA | Cat® C15 |
Engine Power - Tier 3 Engine - ISO 14396:2002 | 271 HP | 361 HP | - | 401 HP |
Engine Power - VR Engine - ISO 14396:2002 | 271 HP | 361 HP | - | 401 HP |
Bore | 5.1 in | - | 4.75 in | 5.4 in |
Stroke | 5.5 in | - | 6 in | 6.8 in |
Displacement | 680.4 in³ | - | 640.75 in³ | 927.6 in³ |
Note (1) | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. | Power ratings apply at a rated speed of 1,800 rpm for LRCs (VR and Tier 3/Stage IIIA) engines when tested under the reference conditions for the specified standard. | Power ratings apply at a rated speed of 2,200 rpm when tested under the reference conditions for the specified standard. | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. |
Note (2) | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat | Power ratings apply at a rated speed of 2,050 rpm for HRC (Stage V) engine when tested under the reference conditions for the specified standard. | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat | All rating conditions are based on ISO/TR 14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifica |
Note (3) | No engine derating required up to 3048 m (10,000 ft) for Tier 3 Engine and 1828 m (6,000 ft) for VR Engine. | All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications | Engine derate will commence at an altitude of 4500 m (14,763.7 ft). | No engine derating required up to 3050 m (10,006 ft) altitude for equivalent Tier 3 engines, and 3506 m (11,502 ft) for VR engines. |
Note (4) | Optional Ventilation Reduction package available. | No engine derating required up to 2895 m (9,500 ft) altitude for Stage V engines, 3505 m (11,500 ft) altitude for Tier 3/Stage IIIA engines, and 3200 m (10,500 ft) for Tier 2/Stage II VR engines. | - | Optional Ventilation Reduction package available. |
Note (5) | Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU Stage IIIA is also available. | Optional Ventilation Reduction package available. | - | Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available. |
Engine Power - Stage V Engine - ISO 14396:2002 | - | 345 HP | - | - |
Note (6) | - | Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available. | - | - |
Note (7) | - | Optional engine meeting the U.S. EPA Tier 4 Final and EU Stage V emission standards is also available. | - | - |
Engine Power - ISO 14396:2002 | - | - | 157 HP | - |
Operating Specifications |
||||
Nominal Payload Capacity | 22487 lb | 33069 lb | 14991 lb | 44092 lb |
Gross Machine Mass | 97453 lb | - | 65482 lb | 180779 lb |
Static Tipping Load - Straight Ahead - Lift Arms Horizontal | 57110 lb | 83218 lb | 45360 lb | 104199 lb |
Static Tipping Load - Full Turn - Lift Arms Horizontal | 46067 lb | 69635 lb | 39397 lb | - |
Breakout Force - Tilt (ISO) | 39524 lb | - | - | - |
Breakout Force - Lift (ISO) | 42333 lb | - | - | - |
Gross Machine Mass - Loaded | - | 138316 lb | - | - |
Breakout Force - Lift and Tilt | - | 53330 lb | - | - |
Breakout Force - SAE | - | - | 26504 lb | 61773 lb |
Static Tipping Full Turn Ahead Lift Arms Horizontal | - | - | - | 88191 lb |
Weights |
||||
Operating Mass* | 66469 lb | 95189 lb | 45691 lb | 128448 lb |
Operating Mass* - Front Axle | 28404 lb | 38358 lb | 16810 lb | 54558 lb |
Operating Mass* - Rear Axle | 38065 lb | 56831 lb | 28881 lb | 73853 lb |
Operating Mass + Rated Payload* | 88956 lb | 128258 lb | 60682 lb | 172540 lb |
Operating Mass + Rated Payload* - Front Axle | 62011 lb | 91412 lb | 41105 lb | 125187 lb |
Operating Mass + Rated Payload* - Rear Axle | 26944 lb | 36846 lb | 19577 lb | 47316 lb |
Note | *Calculated weights. | *Calculated weights. | *Calculated weights. | *Calculated weight. |
Transmission |
||||
Forward - 1 | 2.8 mile/h | 3 mile/h | 2.8 mile/h | 3 mile/h |
Forward - 2 | 5.6 mile/h | 5.7 mile/h | 4.8 mile/h | 5.7 mile/h |
Forward - 3 | 10.4 mile/h | 10.2 mile/h | 9.3 mile/h | 10.2 mile/h |
Forward - 4 | 17.1 mile/h | 17.9 mile/h | 16.3 mile/h | 17.5 mile/h |
Reverse - 1 | 3.1 mile/h | 3.7 mile/h | 2.8 mile/h | 4.1 mile/h |
Reverse - 2 | 6.8 mile/h | 6.5 mile/h | 4.8 mile/h | 7.1 mile/h |
Reverse - 3 | 11.8 mile/h | 11.6 mile/h | 9.2 mile/h | 12.7 mile/h |
Reverse - 4 | 18.2 mile/h | 20.2 mile/h | 14.3 mile/h | 19.4 mile/h |
Hydraulic Cycle Times |
||||
Raise | 7.6 s | 6.8 s | 5 s | 8.8 s |
Dump | 1.6 s | 3.3 s | 2 s | 1.85 s |
Lower, Empty, Float Down | 2 s | 2.9 s | 2.3 s | 3.54 s |
Total Cycle Time | 11.2 s | 13.2 s | 9.3 s | 14.2 s |
Bucket Capacities |
||||
Bucket Capacities | 4.2-5.9 m³ (5.5-7.7 yd³) | 5.7-8.6 m³ (7.5-11.2 yd³) | - | 8.9-11.6 m³ (11.6-15.2 yd³) |
Dump Bucket - 1 | 5.5 yd³ | - | 3.2 yd³ | - |
Dump Bucket - 2 - Standard Bucket | 6.3 yd³ | - | - | - |
Dump Bucket - 3 | 7.3 yd³ | 8.6 yd³ | - | 13.7 yd³ |
Dump Bucket - 4 | 7.7 yd³ | 9.4 yd³ | 4.4 yd³ | - |
Ejector Bucket | 6.3 yd³ | 7.6 yd³ | 3.1 yd³ | - |
Bolt Together Bucket | 6.9 yd³ | - | - | - |
Dump Bucket - 1 - Standard Bucket | - | 7.5 yd³ | - | 11.6 yd³ |
Dump Bucket - 2 | - | 8 yd³ | 3.7 yd³ | 12.4 yd³ |
Dump Bucket - 5 | - | 9.8 yd³ | - | - |
Dump Bucket - 6 | - | 10.5 yd³ | - | - |
Light Material Bucket | - | 11.2 yd³ | - | 15.2 yd³ |
Bolt Together Bucket (1) | - | 8.9 yd³ | - | - |
Bolt Together Bucket (2) | - | 9.8 yd³ | - | - |
Dump Bucket - 3 - Standard Bucket | - | - | 4.1 yd³ | - |
Turning Dimensions |
||||
Outside Clearance Radius* | 261.3 in | - | - | - |
Inner Clearance Radius* | 129.6 in | - | - | - |
Axle Oscillation | 10° | 8° | 10° | 8 ° |
Articulation Angle | 42.5° | 44° | 42.5° | 42.5 ° |
Note | *Clearance dimensions are for reference only. | - | - | **Clearance dimensions are for reference only. |
Outside Clearance Radius | - | 272 in | 225.1 in | - |
Inner Clearance Radius | - | 123.5 in | 111.2 in | - |
Outside Clearance Radius** | - | - | - | 296.7 in |
Inner Clearance Radius** | - | - | - | 127.8 in |
Tires |
||||
Tire Size | 18 × R25 | 26.5R25 | 17.5 × R25 | 35/65 R33 |
Service Refill Capacities |
||||
Engine Crankcase - With Filter | 8.98 gal (US) | - | 6.6 gal (US) | - |
Transmission | 12.4 gal (US) | - | 11.9 gal (US) | 16.4 gal (US) |
Hydraulic Tank | 33 gal (US) | 35.7 gal (US) | 23.2 gal (US) | 37 gal (US) |
Cooling System | 16.1 gal (US) | 19.8 gal (US) | 17.7 gal (US) | 19.8 gal (US) |
Front Differential and Final Drives | 21.1 gal (US) | - | 10 gal (US) | 31.4 gal (US) |
Rear Differential and Final Drives | 21.1 gal (US) | - | 11.1 gal (US) | 33.5 gal (US) |
Fuel Tank | 105.7 gal (US) | - | 77.9 gal (US) | 406.5 gal (US) |
Secondary Fuel Tank - If Equipped | 87.2 gal (US) | - | - | - |
Engine Crankcase | - | 9.8 gal (US) | - | 9 gal (US) |
Front Differential and Final Drives - With Axle Oil Cooling System | - | - | - | 42 gal (US) |
Rear Differential and Final Drives - With Axle Oil Cooling System | - | - | - | 44.1 gal (US) |
Standards |
||||
Standards | ROPS/FOPS Certified Cab | - | ROPS/FOPS Certified Cab | Rollover Protective Structure (ROPS)/Falling Object Protective Structure (FOPS) Certified Cab |
Service Capacities - Not Refill |
||||
Fuel System | - | 128.4 gal (US) | - | - |
DEF Tank | - | 7.1 gal (US) | - | - |
Front Differential and Final Drive | - | 39 gal (US) | - | - |
Rear Differential and Final Drive | - | 37.2 gal (US) | - | - |
Transmission | - | 14.2 gal (US) | - | - |
Add a Similar Product:
- R2900G Underground Mining Loader Add