CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    775G Off-Highway Truck
    View Product
    772 (07) Off-Highway Truck
    View Product Remove
    785 Mining Truck (LRC, Tier 4 Final / EU Stage V)
    View Product Remove
    772G Off-Highway Truck
    View Product Remove

    Weights
    LRC Bare Chassis Weight without Hoist 75118 lb - - 58414 lb
    LRC Bare Chassis Weight with Hoist 76326 lb - - 59223 lb
    LRC Gross Vehicle Weight (Target) without Hoist 246503 lb - - 180999 lb
    LRC Gross Vehicle Weight (Target) with Hoist 246503 lb - - 180999 lb
    HRC Bare Chassis Weight without Hoist 76573 lb - - 59567 lb
    HRC Bare Chassis Weight with Hoist 77781 lb - - 60376 lb
    HRC Gross Vehicle Weight (Target) without Hoist 246503 lb - - 180999 lb
    HRC Gross Vehicle Weight (Target) with Hoist 246503 lb - - 180999 lb
    Note LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. - - LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.

    ROPS
    Tractor ROPS 85288 lb - - 77430 lb
    FOPS Standards - FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II FOPS criteria. - -
    ROPS Standards - ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. - -

    Operating Specifications
    Nominal Water Tank Capacity 15000 gal (US) - - 11000 gal (US)
    Nominal Payload Class (100%) - 51.6 ton (US) - -
    Top Speed - Loaded - 49.2 mile/h - -
    Maximum Payload Class (110%) - 56.7 ton (US) - -
    Body Capacity - SAE 2:1 - 40.8 yd³ - -
    Target Payload Capacity - 51.6 ton (US) - -
    Not to Exceed Payload (120%) - 61.9 ton (US) - -
    Body Capacity (SAE 2:1)** - 40.8 yd³ - -

    Steering
    Steering Standards ISO 5010:2007 ISO 5010:2007 ISO 5010:2007 ISO 5010:2007
    Steer Angle 31 ° 40.5 ° 36 ° 31 °
    Turning Diameter 77.1 ft - - 57.7 ft
    Turning Circle - Clearance Diameter 85.6 ft 66.6 ft - 66.6 ft
    Turning Diameter - Front - 57.7 ft - -
    Turning Diameter - ISO 7457:1997 (33.00R51 tires) - - 97.75 ft -

    Engine
    Engine Model Cat® C27 Cat® C18 Cat� 3512E Cat® C18
    Gross Power - SAE J1995 825 HP 605 HP 1600 HP 605 HP
    Rated Net Power - SAE J1349 683 HP - - 550 HP
    Bore 5.4 in 5.7 in 6.7 in 5.7 in
    Stroke 6 in 7.2 in 8.5 in 7.2 in
    Displacement 1648 in³ 1105 in³ 3573 in³ 1105 in³
    Note Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model. - - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
    Rated Engine Speed - 1700 r/min - 1700 r/min
    Net Power - SAE J1349 - 550 HP 1509 HP -
    Net Power - ISO 9249 - 550 HP - -
    Number of Cylinders - 6 - 6
    Net Torque - SAE J1349 - 2221 ft-lb - -
    Engine Power - ISO 14396 - 598 HP - -
    Emissions Rating - - Fuel Optimized -
    Note (1) - - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. -
    Note (2) - - U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. -
    Note (3) - - Additional fuel optimized selectable power ratings: 1,450 hp -

    Transmission
    Forward - 1 6.6 mile/h 8 mile/h 7.5 mile/h 8 mile/h
    Forward - 2 9.3 mile/h 10.9 mile/h 10.2 mile/h 10.9 mile/h
    Forward - 3 12.6 mile/h 14.8 mile/h 13.8 mile/h 14.8 mile/h
    Forward - 4 16.8 mile/h 19.8 mile/h 18.6 mile/h 19.8 mile/h
    Forward - 5 22.8 mile/h 26.9 mile/h 25.2 mile/h 26.9 mile/h
    Forward - 6 30.7 mile/h 36.2 mile/h 34 mile/h 36.2 mile/h
    Forward - 7 41.6 mile/h 49.2 mile/h - 49.2 mile/h
    Reverse 8.7 mile/h 10.4 mile/h 6.8 mile/h 10.4 mile/h
    Note Maximum travel speeds with standard 24.00R35 (E4) tires - Maximum travel speeds with standard 33.00-R51 tires. Maximum travel speeds with standard 21.00R33 (E4) tires.
    Top Speed - Loaded - - 34 mile/h -

    Brakes
    Brake Surface - Front 257 in² 216 in² - 216 in²
    Brake Surface - Rear 9497 in² 7794 in² - 7794 in²
    Brake Standards - ISO 3450:1996 - -

    Service Refill Capacities
    Fuel Tank Capacity 210 gal (US) - - 140 gal (US)
    Cooling System 45 gal (US) 33 gal (US) 100 gal (US) 33 gal (US)
    Crankcase 24 gal (US) 17 gal (US) 54 gal (US) 17 gal (US)
    Differential - Final Drives 38 gal (US) 47 gal (US) 139 gal (US) 47 gal (US)
    Steering System - Including Tank 14 gal (US) 23 gal (US) - 60 gal (US)
    Brake/Hoist Hydraulic Tank 46.5 gal (US) 38 gal (US) - 38 gal (US)
    Brake Hoist System 85 gal (US) 60 gal (US) - 60 gal (US)
    Fuel Tank - 140 gal (US) 410 gal (US) -
    Steering Tank - 14.5 gal (US) 29 gal (US) -
    Torque Converter - Transmission System - 17 gal (US) - 17 gal (US)
    DEF Tank - 6 gal (US) - -
    Diesel Exhaust Fluid Tank - - 36 gal (US) -
    Front Wheels - Each - - 8 gal (US) -
    Steering System - Includes Tank - - 45 gal (US) -
    Brake/Hoist Tank - - 135 gal (US) -
    Brake Hoist System - Includes Tank - - 160 gal (US) -
    Torque Converter - Transmission System - Including Sump - - 46 gal (US) -

    Weights - Approximate
    Target Gross Machine Operating Weight - 181000 lb - -
    Chassis Weight - 59223 lb - -
    Body Weight - 17306 lb 57779 lb -
    Target Gross Machine Weight - 181000 lb - -
    Nominal Rated Payload (33.00R51 Tires) - - 153 ton (US) -
    Rated Gross Machine Weight (33.00R51 tires) - - 550000 lb -
    Nominal Rated Payload (36.00R51 Tires) - - 157 ton (US) -
    Rated Gross Machine Weight (36.00R51 tires) - - 564000 lb -
    Chassis Weight (33.00R51 Tires) - - 186799 lb -
    Chassis Weight (36.00R51 Tires) - - 193192 lb -
    Note (1) - - Consult your tire manufacturer for maximum tire load -
    Note (2) - - Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. -
    Note (3) - - Body weight varies depending on body selection and configuration. -

    Weight Distributions - Approximate
    Front Axle - Empty - 51.4 % 48% -
    Front Axle - Loaded - 34.2 % 33% -
    Rear Axle - Empty - 48.6 % 52% -
    Rear Axle - Loaded - 65.8 % 67% -
    Note - - Weight distributions optimized with Cat body. -

    Final Drives
    Differential Ratio - 2.74:1 2:10:01 -
    Planetary Ratio - 4.80:1 10.83:1 -
    Total Reduction Ratio - 13.14:1 22.75:1 -
    Type - - Double reduction, planetary with full floating axles. -

    Body Hoists
    Pump Flow - High Idle - 112 gal/min 192.7 gal/min -
    Relief Valve Setting - Raise - 2750 psi 2500 psi -
    Relief Valve Setting - Lower - 500 psi - -
    Body Raise Time - High Idle - 8 s 15.2 s -
    Body Lower Time - Float - 10 s - -
    Body Power Down - High Idle - 10 s - -
    Type - - Twin, two-stage hydraulic cylinders with snubbing valve. -
    Body Lower Time - Float High Idle - - 15.9 s -
    Body Lower Time - Float Low Idle - - 16.2 s -
    Body Power Down- High Idle - - 15.9 s -

    Suspension
    Rear axle - Oscillation - 8.9 ° +/- 5 degrees -
    Empty Loaded Cylinder Stroke Front - 9.2 in - -
    Empty Loaded Cylinder Stroke Rear - 5.8 in - -
    Type - - Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments -
    Effective Cylinder Stroke - Front - - 12.6 in -
    Effective Cylinder Stroke - Rear - - 6.5 in -

    Capacity - Dual Slope - 100% Fill Factor
    Heaped 2:1 (SAE) - 40.8 yd³ - -
    Struck - 31.3 yd³ - -

    Capacity - Flat Floor - 100% Fill Factor
    Struck - 31.3 yd³ - -
    Heaped 2:1 (SAE) - 40.9 yd³ - -

    Sound
    Sound Standards (3) - Operator Equivalent Sound Pressure Level (Leq) is 78 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. - -
    Sound Standards (2) - Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 118 dB(A). - -
    Sound Standards (1) - Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. - -

    Dimensions
    Height - Top of ROPS - 12.8 ft - -
    Inside Body Depth - Maximum - 5.7 ft - -
    Overall Body Length - 26.8 ft - -
    Inside Body Length - 19 ft - -
    Overall Length - 28.9 ft - -
    Wheel Base - 13 ft - -
    Rear Axle - Tail - 9.5 ft - -
    Ground Clearance - 1.6 ft - -
    Dump Clearance - 1.5 ft - -
    Loading Height - Empty - 11.6 ft - -
    Overall Height - Body Raised - 27.1 ft - -
    Operating Width - 15.7 ft - -
    Centerline Front Tire Width - 10.4 ft - -
    Engine Guard Clearance - 2 ft - -
    Outside Body Width - 12.9 ft - -
    Inside Body Width - 11.9 ft - -
    Front Canopy Height - 13.7 ft - -
    Rear Axle - Clearance - 1.9 ft - -
    Centerline of Rear Dual Tire Width - 8.7 ft - -
    Overall Tire Width - 12.9 ft - -

    Tires
    Standard Tire - 21.00R33 (E4) 33.00R51 -
    Optional Tire - - 36.00R51 -
    Rims - - 610 mm (24") Rims (standard). 660 mm (26") Rims (optional). -
    Note (1) - - Quick Change Rims optional. -
    Note (2) - - Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. -

    Braking System
    Service Brakes - - Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated -
    Front Wet Disc Brake Surface Area - - 9487 in² -
    Rear - Wet Disc Brake Surface Area - - 13908 in² -
    Standards - - Service and Secondary: ISO 3450:2011 -
    Parking Brake - - Four corner, multi disc, spring applied, hydraulically released -

    Capacity - MSD II - 100% Fill Factor
    Struck - - 72 m^3 / 94 yd^3 -
    Heaped (SAE 2:1) - - 99 m^3 / 129 yd^3 -
    Note - - Consult your local Cat dealer for body recommendations. -

    Cab
    Air Conditioning - - HFC - 134A refrigerant: 24,500 Btu/h -
    Heater / Defroster - - 33300 Btu/h -
    Note - - The operator sound pressure level, 77 dB(A) with direct drive and 75 dB9A) with optional clutch, tested to ISO 6396:2008. -
    ROPS Standards (1) - - ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. -
    FOPS Standards - - FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. -

    Dimensions (All dimensions are approximate. MSD II Body, 33R51 tires, unloaded machine.)
    Height - Top of ROPS - - 17.09 ft -
    Overall Body Length - - 39.32 ft -
    Inside Body Length - - 27.29 ft -
    Overall Length - - 39.23 ft -
    Wheel Base - - 17 ft -
    Rear Axle - Tail - - 12.56 ft -
    Ground Clearance - - 3.29 ft -
    Dump Clearance - - 3.7 ft -
    Loading Height - Empty - - 17.39 ft -
    Inside Body Depth - Maximum - - 9.15 ft -
    Overall Height - Body Raised - - 39.48 ft -
    Operating Width - - 24.72 ft -
    Centerline Front Tire Width - - 15.91 ft -
    Engine Guard Clearance - - 3.41 ft -
    Overall Canopy Width - - 24.81 ft -
    Outside Body Width - - 22 ft -
    Inside Body Width - - 19.72 ft -
    Front Canopy Height - - 19.8 ft -
    Rear Axle - Clearance - - 3.25 ft -
    Centerline of Rear Dual Tire Width - - 14.06 ft -
    Overall Tire Width - - 20.59 ft -
    Add a Similar Product:
    • 775 Off-Highway Truck Add
    • 770 Off-Highway Truck Add
    • 797F Mining Truck Add
    • 798 AC Electric Drive Mining Truck Add
    • 794 AC Mining Truck Add
    • 796 AC Electric Drive Mining Truck Add
    • 789 Next Generation Add
    • 793F Mining Truck Add