CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    775G Off-Highway Truck
    View Product
    772 (07) Off-Highway Truck
    View Product Remove
    797F Mining Truck
    View Product Remove
    775 Off-Highway Truck
    View Product Remove

    Weights
    LRC Bare Chassis Weight without Hoist 75118 lb - - -
    LRC Bare Chassis Weight with Hoist 76326 lb - - -
    LRC Gross Vehicle Weight (Target) without Hoist 246503 lb - - -
    LRC Gross Vehicle Weight (Target) with Hoist 246503 lb - - -
    HRC Bare Chassis Weight without Hoist 76573 lb - - -
    HRC Bare Chassis Weight with Hoist 77781 lb - - -
    HRC Gross Vehicle Weight (Target) without Hoist 246503 lb - - -
    HRC Gross Vehicle Weight (Target) with Hoist 246503 lb - - -
    Note LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. - - -

    ROPS
    Tractor ROPS 85288 lb - - -
    FOPS Standards - FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II FOPS criteria. - Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.
    ROPS Standards - ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. - Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.

    Operating Specifications
    Nominal Water Tank Capacity 15000 gal (US) - - -
    Nominal Payload Class (100%) - 51.6 ton (US) - 70.5 ton (US)
    Top Speed - Loaded - 49.2 mile/h - 41.6 mile/h
    Maximum Payload Class (110%) - 56.7 ton (US) - -
    Body Capacity - SAE 2:1 - 40.8 yd³ - 55.23 yd³
    Target Payload Capacity - 51.6 ton (US) - -
    Not to Exceed Payload (120%) - 61.9 ton (US) - -
    Body Capacity (SAE 2:1)** - 40.8 yd³ - -
    Maximum Working Payload (110%) - - - 77.5 ton (US)
    Target Payload (100%) - - - 70.5 ton (US)
    Maximum Allowable Payload (120%)* - - - 84.6 ton (US)
    Note (2) - - - * Refer to the Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations.
    Note (1) - - - Capacity with Dual Slope body – no liner.

    Steering
    Steering Standards ISO 5010:2007 ISO 5010:2007 ISO 5010:2007 ISO 5010:2007
    Steer Angle 31 ° 40.5 ° - 31 °
    Turning Diameter 77.1 ft - - -
    Turning Circle - Clearance Diameter 85.6 ft 66.6 ft - 85.6 ft
    Turning Diameter - Front - 57.7 ft 122.7 ft 77.1 ft
    Steering Angle - - 40 ° -
    Note - - Turning Diameter (ISO 7457:2009) -

    Engine
    Engine Model Cat® C27 Cat® C18 Cat® C175-20 Cat® C27
    Gross Power - SAE J1995 825 HP 605 HP 4000 HP 825 HP
    Rated Net Power - SAE J1349 683 HP - - -
    Bore 5.4 in 5.7 in 6.9 in 5.4 in
    Stroke 6 in 7.2 in 8.7 in 6 in
    Displacement 1648 in³ 1105 in³ 6469 in³ 1648 in³
    Note Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model. - - -
    Rated Engine Speed - 1700 r/min - 1800 r/min
    Net Power - SAE J1349 - 550 HP 3795 HP 768 HP
    Net Power - ISO 9249 - 550 HP - 775 HP
    Number of Cylinders - 6 - -
    Net Torque - SAE J1349 - 2221 ft-lb - -
    Engine Power - ISO 14396 - 598 HP - 812 HP
    Rated Speed - - 1750 r/min -
    Emissions - - U.S. EPA Compliant. Where applicable, the Cat C175-20 engine is compliant with U.S. EPA emission standards.Tier 4 engine option available to meet Tier 4 Final emission standards. Meets EU Stage V emission standards.
    Note (1) - - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Power rating applies at 2,000 rpm when tested under the specified condition for the specified standard.
    Note (2) - - U.S. EPA Tier 4 Final available for applicable markets. Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
    Note (3) - - High Altitude Low Maintenance Ratio Engine Configuration (4x4) option available. No engine derating required up to 3810 m (12,500 ft) for Tier 2 Equivalent.
    Net Power - 80/1269/EEC - - - 775 HP
    Net Torque - - - 3148 ft-lb
    Peak Torque - Speed - - - 1200 r/min

    Transmission
    Forward - 1 6.6 mile/h 8 mile/h 6.6 mile/h 6.6 mile/h
    Forward - 2 9.3 mile/h 10.9 mile/h 8.9 mile/h 9.3 mile/h
    Forward - 3 12.6 mile/h 14.8 mile/h 12 mile/h 12.6 mile/h
    Forward - 4 16.8 mile/h 19.8 mile/h 16.2 mile/h 16.8 mile/h
    Forward - 5 22.8 mile/h 26.9 mile/h 21.8 mile/h 22.8 mile/h
    Forward - 6 30.7 mile/h 36.2 mile/h 29.4 mile/h 30.7 mile/h
    Forward - 7 41.6 mile/h 49.2 mile/h 39.5 mile/h 41.6 mile/h
    Reverse 8.7 mile/h 10.4 mile/h 7.4 mile/h 8.7 mile/h
    Note Maximum travel speeds with standard 24.00R35 (E4) tires - - Maximum travel speeds with standard 24.00R35 (E4) tires.
    Top Speed - Loaded - - 39.5 mile/h -

    Brakes
    Brake Surface - Front 257 in² 216 in² - 257 in²
    Brake Surface - Rear 9497 in² 7794 in² - 9497 in²
    Brake Standards - ISO 3450:1996 - ISO 3450:2011

    Service Refill Capacities
    Fuel Tank Capacity 210 gal (US) - - -
    Cooling System 45 gal (US) 33 gal (US) 306 gal (US) 45 gal (US)
    Crankcase 24 gal (US) 17 gal (US) 103 gal (US) 24 gal (US)
    Differential - Final Drives 38 gal (US) 47 gal (US) - 38 gal (US)
    Steering System - Including Tank 14 gal (US) 23 gal (US) 95 gal (US) 14 gal (US)
    Brake/Hoist Hydraulic Tank 46.5 gal (US) 38 gal (US) - 46.5 gal (US)
    Brake Hoist System 85 gal (US) 60 gal (US) - 85 gal (US)
    Fuel Tank - 140 gal (US) 1000 gal (US) 210 gal (US)
    Steering Tank - 14.5 gal (US) 67 gal (US) 9.5 gal (US)
    Torque Converter - Transmission System - 17 gal (US) - -
    DEF Tank - 6 gal (US) - -
    Fuel Tank (Tier 4) - - 1200 gal (US) -
    Diesel Exhaust Fluid Tank - - 100 gal (US) -
    Front Wheels - Each - - 16 gal (US) -
    Differentials - - 330 gal (US) -
    Brake/Hoist Tank - - 203 gal (US) -
    Brake Hoist System - Includes Tank - - 489 gal (US) -
    Torque Converter Sump - - 80 gal (US) -
    Torque Converter/Transmission System - Including Sump - - 166 gal (US) -
    Note (1) - - DEF Tank only available for EPA Tier 4 engine option. -
    Torque Converter - Transmission System - LRC - - - 16 gal (US)
    Torque Converter - Transmission System - HRC - - - 18 gal (US)

    Weights - Approximate
    Target Gross Machine Operating Weight - 181000 lb - -
    Chassis Weight - 59223 lb 474472 lb -
    Body Weight - 17306 lb 94799 lb -
    Target Gross Machine Weight - 181000 lb - -
    Nominal Rated Payload - - 400 ton (US) -
    Rated Gross Machine Weight - - 1375000 lb -
    Note (1) - - Consult your tire manufacturer for maximum tire load -
    Note (2) - - Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. -
    Note (4) - - Tier 4 Chassis Weight: 486263 lb (220565 kg) -
    Maximum Gross Vehicle Weight - - - 246503 lb

    Weight Distributions - Approximate
    Front Axle - Empty - 51.4 % 47.20% 50 %
    Front Axle - Loaded - 34.2 % 33.30% 34 %
    Rear Axle - Empty - 48.6 % 52.80% 50 %
    Rear Axle - Loaded - 65.8 % 66.70% 66 %
    Note - - Weight distributions optimized with Cat body. -

    Final Drives
    Differential Ratio - 2.74:1 1.276:1 3.64:1
    Planetary Ratio - 4.80:1 16.67:1 4.80:1
    Total Reduction Ratio - 13.14:1 21.26:1 17.49:1
    Type - - Double reduction, planetary with full floating axles. -
    Note - - Double reduction, planetary with full floating axles. -

    Body Hoists
    Pump Flow - High Idle - 112 gal/min 317 gal/min 118 gal/min
    Relief Valve Setting - Raise - 2750 psi 3510 psi 2502 psi
    Relief Valve Setting - Lower - 500 psi - 500 psi
    Body Raise Time - High Idle - 8 s 25 s 10 s
    Body Lower Time - Float - 10 s 18 s 14 s
    Body Power Down - High Idle - 10 s - 14 s
    Type - - Twin, two-stage hydraulic cylinders with snubbing valve. -
    Body Power Down- High Idle - - 18 s -

    Suspension
    Rear axle - Oscillation - 8.9 ° ±3.96 degrees 8.1°
    Empty Loaded Cylinder Stroke Front - 9.2 in - 9.2 in
    Empty Loaded Cylinder Stroke Rear - 5.8 in - 5.8 in
    Type - - Self-contained nitrogen/oil cylinders, rear strut pin-to-pin mounting, top & bottom double shear clevis attachments -
    Effective Cylinder Stroke - Front - - 3.9 in -
    Effective Cylinder Stroke - Rear - - 3.7 in -

    Capacity - Dual Slope - 100% Fill Factor
    Heaped 2:1 (SAE) - 40.8 yd³ - -
    Struck - 31.3 yd³ - 42.7 yd³
    Heaped (SAE 2:1)* - - - 55.5 yd³
    Note (1) - - - Contact your local Cat dealer for body recommendation.
    Note (2) - - - *ISO 6483:1980

    Capacity - Flat Floor - 100% Fill Factor
    Struck - 31.3 yd³ - 42.2 yd³
    Heaped 2:1 (SAE) - 40.9 yd³ - -
    Heaped (SAE 2:1)* - - - 55.2 yd³
    Note (1) - - - Contact your local Cat dealer for body recommendation.
    Note (2) - - - *ISO 6483:1980

    Sound
    Sound Standards (3) - Operator Equivalent Sound Pressure Level (Leq) is 78 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. - Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
    Sound Standards (2) - Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 118 dB(A). - The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid‑gear moving operation is 86 dB(A).
    Sound Standards (1) - Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. - The operator Equivalent Sound Pressure Level (Leq) is 76 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with t

    Dimensions
    Height - Top of ROPS - 12.8 ft - -
    Inside Body Depth - Maximum - 5.7 ft 11 ft -
    Overall Body Length - 26.8 ft 48.6 ft -
    Inside Body Length - 19 ft 32.75 ft -
    Overall Length - 28.9 ft 49.5 ft -
    Wheel Base - 13 ft 23.58 ft -
    Rear Axle - Tail - 9.5 ft 12.9 ft -
    Ground Clearance - 1.6 ft - -
    Dump Clearance - 1.5 ft 6.58 ft -
    Loading Height - Empty - 11.6 ft 23 ft -
    Overall Height - Body Raised - 27.1 ft 51.5 ft -
    Operating Width - 15.7 ft - -
    Centerline Front Tire Width - 10.4 ft 21.41 ft -
    Engine Guard Clearance - 2 ft - -
    Outside Body Width - 12.9 ft 32 ft -
    Inside Body Width - 11.9 ft 27.91 ft -
    Front Canopy Height - 13.7 ft - -
    Rear Axle - Clearance - 1.9 ft - -
    Centerline of Rear Dual Tire Width - 8.7 ft 20.41 ft -
    Overall Tire Width - 12.9 ft 31.25 ft -
    Rear Axle - Clearance - Loaded - - 3.08 ft -
    Loaded Ground Clearance - - 2.58 ft -
    Engine Guard Clearance - Loaded - - 3.33 ft -
    Height - Top of ROPS - Empty - - 21.4 ft -
    Front Canopy Height - Empty - - 25.33 ft -
    Overall Canopy Width - - 29.91 ft -

    Tires
    Standard Tire - 21.00R33 (E4) - 24.00R35 (E4)
    Tires - - 59/80 R63 -
    Rims - - 44" x 63" -
    Note - - Quick Change Rims optional. -
    Note (1) - - Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. Productive capabilities of the 775G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.
    Note (2) - - - Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection.

    Braking System
    Service Brakes - - Service Brakes: Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated -
    Front Wet Disc Brake Surface Area - - 20500 in² -
    Rear - Wet Disc Brake Surface Area - - 30750 in² -
    Standards - - Service and Secondary: ISO 3450:2011 -
    Parking Brake - - Four-corner, Multi-disc, Spring Applied, Hydraulically Released -
    Load Brake - - Rear service brakes -
    Note - - Anti-Lock Brake System (ABS) optional with CMD package -

    Capacity - HP Body - 100% Fill Factor
    Struck - - 225 yd³ / 172 m³ -
    Heaped (SAE 2:1)* - - 330 yd³ / 252 m³ -
    Note (1) - - Consult your local Cat dealer for body recommendations. -

    Cab
    Air Conditioning - - HFC - 134A refrigerant: 24,300 Btu/h -
    Heater / Defroster - - 38900 Btu/h -
    Note - - Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning. -
    ROPS Standards (1) - - The operator sound pressure level, 76 dB(A), complies with ISO 6394:2008 and ISO 6396:2008. -
    ROPS Standards (2) - - ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria. -
    FOPS Standards - - FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria. -

    Sustainability
    Recyclability - - - 98%
    Add a Similar Product:
    • 772G Off-Highway Truck Add
    • 770 Off-Highway Truck Add
    • 798 AC Electric Drive Mining Truck Add
    • 794 AC Mining Truck Add
    • 796 AC Electric Drive Mining Truck Add
    • 785 Mining Truck (LRC, Tier 4 Final / EU Stage V) Add
    • 789 Next Generation Add
    • 793F Mining Truck Add