CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    775G Off-Highway Truck
    View Product
    775 Off-Highway Truck
    View Product Remove
    798 AC Electric Drive Mining Truck
    View Product Remove
    793F Mining Truck
    View Product Remove

    Weights
    LRC Bare Chassis Weight without Hoist 75118 lb - - -
    LRC Bare Chassis Weight with Hoist 76326 lb - - -
    LRC Gross Vehicle Weight (Target) without Hoist 246503 lb - - -
    LRC Gross Vehicle Weight (Target) with Hoist 246503 lb - - -
    HRC Bare Chassis Weight without Hoist 76573 lb - - -
    HRC Bare Chassis Weight with Hoist 77781 lb - - -
    HRC Gross Vehicle Weight (Target) without Hoist 246503 lb - - -
    HRC Gross Vehicle Weight (Target) with Hoist 246503 lb - - -
    Note LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. - - -

    ROPS
    Tractor ROPS 85288 lb - - -
    FOPS Standards - Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria. - FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II FOPS criteria.
    ROPS Standards - Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. - ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:1994 ROPS criteria.

    Operating Specifications
    Nominal Water Tank Capacity 15000 gal (US) - - -
    Nominal Payload Class (100%) - 70.5 ton (US) - -
    Top Speed - Loaded - 41.6 mile/h - -
    Maximum Working Payload (110%) - 77.5 ton (US) - -
    Target Payload (100%) - 70.5 ton (US) - -
    Maximum Allowable Payload (120%)* - 84.6 ton (US) - -
    Note (2) - * Refer to the Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations. - -
    Note (1) - Capacity with Dual Slope body – no liner. - -
    Body Capacity - SAE 2:1 - 55.23 yd³ - -

    Steering
    Steering Standards ISO 5010:2007 ISO 5010:2007 Steering Standards: ISO 5010:2007 SAE J15111 OCT90, ISO 5010:1992
    Steer Angle 31 ° 31 ° 39 ° 36 °
    Turning Diameter 77.1 ft - - -
    Turning Circle - Clearance Diameter 85.6 ft 85.6 ft - -
    Turning Diameter - Front - 77.1 ft 106.3 ft 93.2 ft
    Note - - Turning Diameter (ISO 7457:1997) -

    Engine
    Engine Model Cat® C27 Cat® C27 Cat® C175-16 Cat® C175-16
    Gross Power - SAE J1995 825 HP 825 HP 3500 HP 2650 HP
    Rated Net Power - SAE J1349 683 HP - - -
    Bore 5.4 in 5.4 in 6.9 in 6.9 in
    Stroke 6 in 6 in 8.7 in 8.7 in
    Displacement 1648 in³ 1648 in³ 5187 in³ 5187 in³
    Note Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model. - - -
    Rated Engine Speed - 1800 r/min - -
    Net Power - SAE J1349 - 768 HP 3405 HP 2478 HP
    Net Power - 80/1269/EEC - 775 HP - -
    Net Power - ISO 9249 - 775 HP - -
    Engine Power - ISO 14396 - 812 HP - -
    Note (2) - Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F). U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. EPA Tier 4 Final / EU Stage V available for applicable markets.
    Net Torque - 3148 ft-lb - -
    Peak Torque - Speed - 1200 r/min - -
    Note (1) - Power rating applies at 2,000 rpm when tested under the specified condition for the specified standard. Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
    Note (3) - No engine derating required up to 3810 m (12,500 ft) for Tier 2 Equivalent. Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp -
    Emissions - Meets EU Stage V emission standards. - Fuel Optimized
    Optional Gross Power - SAE J1995 - - 3100 HP -
    Rated Speed - - 1800 r/min 1750 r/min
    Emissions Rating - - Fuel Optimized -

    Transmission
    Forward - 1 6.6 mile/h 6.6 mile/h - 8 mile/h
    Forward - 2 9.3 mile/h 9.3 mile/h - 10.8 mile/h
    Forward - 3 12.6 mile/h 12.6 mile/h - 14.8 mile/h
    Forward - 4 16.8 mile/h 16.8 mile/h - 19.9 mile/h
    Forward - 5 22.8 mile/h 22.8 mile/h - 27.1 mile/h
    Forward - 6 30.7 mile/h 30.7 mile/h - 37.3 mile/h
    Forward - 7 41.6 mile/h 41.6 mile/h - -
    Reverse 8.7 mile/h 8.7 mile/h - 7.3 mile/h
    Note Maximum travel speeds with standard 24.00R35 (E4) tires Maximum travel speeds with standard 24.00R35 (E4) tires. - -
    Top Speed - Loaded - - - 37.3 mile/h

    Brakes
    Brake Surface - Front 257 in² 257 in² - 13921 in²
    Brake Surface - Rear 9497 in² 9497 in² - 20847 in²
    Brake Standards - ISO 3450:2011 - -
    Standards - - - J-ISO 3450 JAN88, ISO 3450:1996

    Service Refill Capacities
    Fuel Tank Capacity 210 gal (US) - - -
    Cooling System 45 gal (US) 45 gal (US) 211 gal (US) 284 gal (US)
    Crankcase 24 gal (US) 24 gal (US) 82 gal (US) 82 gal (US)
    Differential - Final Drives 38 gal (US) 38 gal (US) - -
    Steering System - Including Tank 14 gal (US) 14 gal (US) - 77 gal (US)
    Brake/Hoist Hydraulic Tank 46.5 gal (US) 46.5 gal (US) - -
    Brake Hoist System 85 gal (US) 85 gal (US) - -
    Fuel Tank - 210 gal (US) 1300 gal (US) 750 gal (US)
    Steering Tank - 9.5 gal (US) - -
    Torque Converter - Transmission System - LRC - 16 gal (US) - -
    Torque Converter - Transmission System - HRC - 18 gal (US) - -
    Fuel Tank (Tier 4) - - 1200 gal (US) -
    Diesel Exhaust Fluid Tank - - 100 gal (US) 62 gal (US)
    Final Drive - Each - - 67 gal (US) -
    Hydraulic System - Including Tank - - 385 gal (US) -
    Hydraulic Tank - - 296 gal (US) -
    Grease Tank - - 90 lb -
    Note (1) - - DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option DEF Tank only available for EPA Tier 4 engine option.
    Fuel Tank - Optional - - - 1300 gal (US)
    Rear Axle - Housing - - - 260 gal (US)
    Brake Hoist System - Includes Tank - - - 347 gal (US)
    Torque Converter - Transmission Sump - - - 27 gal (US)
    Torque Converter/Transmission System - Including Sump - - - 55 gal (US)

    Capacity - Dual Slope - 100% Fill Factor
    Struck - 42.7 yd³ - -
    Heaped (SAE 2:1)* - 55.5 yd³ - -
    Note (1) - Contact your local Cat dealer for body recommendation. - -
    Note (2) - *ISO 6483:1980 - -

    Capacity - Flat Floor - 100% Fill Factor
    Struck - 42.2 yd³ - -
    Heaped (SAE 2:1)* - 55.2 yd³ - -
    Note (1) - Contact your local Cat dealer for body recommendation. - -
    Note (2) - *ISO 6483:1980 - -

    Weight Distributions - Approximate
    Front Axle - Empty - 50 % 47 % 48 %
    Front Axle - Loaded - 34 % 33 % 33 %
    Rear Axle - Empty - 50 % 53 % 52 %
    Rear Axle - Loaded - 66 % 67 % 67 %
    Note - - Weight distributions optimized with Cat body. -

    Final Drives
    Differential Ratio - 3.64:1 - 1.8:1
    Planetary Ratio - 4.80:1 - 16:01
    Total Reduction Ratio - 17.49:1 - 26.8:1

    Body Hoists
    Pump Flow - High Idle - 118 gal/min 257.3 gal/min 224 gal/min
    Relief Valve Setting - Raise - 2502 psi 3029 psi 2955 psi
    Relief Valve Setting - Lower - 500 psi - -
    Body Raise Time - High Idle - 10 s 21 s 19 s
    Body Lower Time - Float - 14 s 22 s 20 s
    Body Power Down - High Idle - 14 s - 17.5 s
    Type - - Twin, two-stage hydraulic cylinders with snubbing valve. Twin, two-stage hydraulic cylinders with snubbing valve
    Body Power Down- High Idle - - 17.5 s -
    Note (1) - - Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages. -
    Note (2) - - Power raise in both stages; power down capability in both stages. -
    Note (3) - - Automatic body-lower modulation reduces impact on frame. -

    Weights - Approximate
    Maximum Gross Vehicle Weight - 246503 lb - -
    Nominal Rated Payload - - 410 ton (US) 256 ton (US)
    Rated Gross Machine Weight - - 1375000 lb 851000 lb
    Chassis Weight - - 453826 lb 265639 lb
    Body Weight Range - - 38 833 - 43 275 kg (85,611 - 95,406 lb) -
    Note (1) - - Consult your tire manufacturer for maximum tire load. Consult your tire manufacturer for maximum tire load
    Note (2) - - Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires. Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
    Note (3) - - Body weight varies depending on how body is equipped. Refer to the Cat Mining Truck 10/10/20 Overload Policy for maximum gross machine weight limitations.
    Body Weight - - - 67682 lb

    Suspension
    Empty Loaded Cylinder Stroke Front - 9.2 in - -
    Rear axle - Oscillation - 8.1° - ±4.9 degrees
    Empty Loaded Cylinder Stroke Rear - 5.8 in - -
    Type - - Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
    Effective Cylinder Stroke - Front - - 10 in 5.1 in
    Effective Cylinder Stroke - Rear - - 5 in 4.2 in

    Tires
    Note (2) - Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection. Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
    Note (1) - Productive capabilities of the 775G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production. Quick Change Rims optional. Extended life wheel stations optional.
    Standard Tire - 24.00R35 (E4) - -
    Rims - - 44" x 63" Rims 29" or 32"
    Standard Tires - - 59/80 R63 40.00 R57
    Note - - - Quick Change Rims optional.

    Sound
    Sound Standards (1) - The operator Equivalent Sound Pressure Level (Leq) is 76 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with t - Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
    Sound Standards (2) - The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid‑gear moving operation is 86 dB(A). - -
    Sound Standards (3) - Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. - -
    Sound Standards - - The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008. The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 76 dB(A) for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed.

    Sustainability
    Recyclability - 98% - -

    Service Refill Capacities - High Altitude Only
    Fuel Tank - - 2000 gal (US) -
    Cooling System - - 273 gal (US) -
    Crankcase - - 124 gal (US) -
    Hydraulic Tank - - 273 gal (US) -
    Hydraulic System (includes tank) - - 342 gal (US) -

    AC Drive System
    Total Reduction Ratio - - 35:01:00 -
    Top Speed - Loaded - - 40 mile/h -
    Generator/Alternator - - Brushless, engine mounted, dual bearing -
    Controls - - IGBT Inverter Technology, air cooled, pressurized cabinet with filtration -
    Wheel Motor - - Cat high-torque AC induction, rear axle mounted -
    Cooling System - - Cat variable speed, hydraulically driven cooling system -

    Braking System
    Service Brakes - - Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
    Front Wet Disc Brake Surface Area - - 22642 in² 13921 in³
    Rear - Wet Disc Brake Surface Area - - 32730 in² 20847 in³
    Standards - - Service and Secondary: ISO 3450:2011 (Service and Secondary): ISO 3450:1996
    Electric Retarding - - Radial Grid Design -
    Dynamic Retarding Power - Continuous - - 5480 HP -
    Parking Brakes - - Four-corner, Multi-disc, Spring Applied, Hydraulically Released Four-corner, Multi-disc, Spring Applied, Hydraulically Released
    Load Brake - - Rear service brakes Rear service brakes
    Note - - Anti-Lock Brake System (ABS) optional with CMD package Anti-Lock Brake System (ABS) optional with CMD package

    Capacity - HE Body - 100% fill factor
    Struck - - 129-200 m³ (168-261 yd³) -
    Heaped (SAE 2:1) - - 218-276 m³ (285-361 yd³) -
    Note - - Contact your local Cat dealer for body recommendations. -

    Cab
    Air Conditioning - - HFC - 134A refrigerant: 21,600 Btu/h Air Conditioning (HFC - 134A refrigerant): 24,300 Btu/hr
    Heater / Defroster - - 24600 Btu/h 38900 Btu/h
    Note - - Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning. Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning.
    ROPS Standards (1) - - ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. The operator sound pressure level, 76 dB(A), complies with ISO 6394 and ISO 6396.
    FOPS Standards - - FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria.
    ROPS Standards (2) - - - ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria.

    Engine - High Altitude Only
    Engine Model - - Cat® C175-20 -
    Gross Power SAE J1995:2014 - - 4150 HP -
    Net Power - SAE J1349:2011 - - 4000 HP -
    Rated Speed - - 1750 r/min -
    Emissions Rating - - Fuel Optimized -
    Bore - - 6.9 in -
    Stroke - - 8.7 in -
    Displacement - - 6469 in³ -
    Note 1 - - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. -
    Note 2 - - Additional fuel optimized selectable power rating: 2983 kW / 4,000 hp -

    Dimensions (Approximate)
    Height - Top of ROPS - - 22.1 ft -
    Overall Length - - 51.44 ft -
    Wheel Base - - 21.9 ft -
    Rear Axle - Tail - - 16.07 ft -
    Dump Clearance - Empty - - 5.72 ft -
    Loading Height - Empty - - 25.54 ft -
    Overall Height - Body Raised - - 48.85 ft -
    Centerline Front Tire Width - - 23.06 ft -
    Front Axle Clearance - Loaded - - 2.81 ft -
    Overall Canopy Width (with rock deflectors) - - 33.15 ft -
    Outside Body/Canopy Width (without rock deflectors) - - 31.62 ft -
    Inside Body Width - - 29.44 ft -
    Front Canopy Height - Empty - - 26.01 ft -
    Rear Axle Clearance - Loaded - - 2.8 ft -
    Centerline of Rear Dual Tire Width - - 19.5 ft -
    Overall Tire Width - Empty - - 30.27 ft -
    Overall Length (High Altitude only) - - 51.87 ft -
    Note - - Dimensions listed includes canopy deflectors -

    Capacity - HP Body - 100% Fill Factor
    Struck - - - 112.6-151 m³ (147-197.5 yd³)
    Heaped (SAE 2:1)* - - - 162-191 m³ (212-250 yd³)
    Note (1) - - - Contact your local Cat dealer for body recommendation.
    Note (2) - - - *ISO 6483:1980

    Capacity - MSD II - 100% Fill Factor
    Struck - - - 112-142 m³ (146-186 yd³)
    Heaped (SAE 2:1) - - - 159-190 m3 (209-250 yd3)
    Note - - - Contact your local Cat dealer for body recommendation.
    Add a Similar Product:
    • 772G Off-Highway Truck Add
    • 772 (07) Off-Highway Truck Add
    • 770 Off-Highway Truck Add
    • 797F Mining Truck Add
    • 796 AC Electric Drive Mining Truck Add
    • 794 AC Mining Truck Add
    • 789 Next Generation Add
    • 785 Mining Truck (LRC, Tier 4 Final / EU Stage V) Add