Compare Equipment Go Back
775G Off-Highway Truck |
772G Off-Highway Truck |
793F Mining Truck |
|
Weights |
|||
---|---|---|---|
LRC Bare Chassis Weight without Hoist | 75118 lb | 58414 lb | - |
LRC Bare Chassis Weight with Hoist | 76326 lb | 59223 lb | - |
LRC Gross Vehicle Weight (Target) without Hoist | 246503 lb | 180999 lb | - |
LRC Gross Vehicle Weight (Target) with Hoist | 246503 lb | 180999 lb | - |
HRC Bare Chassis Weight without Hoist | 76573 lb | 59567 lb | - |
HRC Bare Chassis Weight with Hoist | 77781 lb | 60376 lb | - |
HRC Gross Vehicle Weight (Target) without Hoist | 246503 lb | 180999 lb | - |
HRC Gross Vehicle Weight (Target) with Hoist | 246503 lb | 180999 lb | - |
Note | LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. | LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. | - |
ROPS |
|||
Tractor ROPS | 85288 lb | 77430 lb | - |
ROPS Standards | - | - | ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:1994 ROPS criteria. |
FOPS Standards | - | - | FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II FOPS criteria. |
Operating Specifications |
|||
Nominal Water Tank Capacity | 15000 gal (US) | 11000 gal (US) | - |
Steering |
|||
Steering Standards | ISO 5010:2007 | ISO 5010:2007 | SAE J15111 OCT90, ISO 5010:1992 |
Steer Angle | 31 ° | 31 ° | 36 ° |
Turning Diameter | 77.1 ft | 57.7 ft | - |
Turning Circle - Clearance Diameter | 85.6 ft | 66.6 ft | - |
Turning Diameter - Front | - | - | 93.2 ft |
Engine |
|||
Engine Model | Cat® C27 | Cat® C18 | Cat® C175-16 |
Gross Power - SAE J1995 | 825 HP | 605 HP | 2650 HP |
Rated Net Power - SAE J1349 | 683 HP | 550 HP | - |
Bore | 5.4 in | 5.7 in | 6.9 in |
Stroke | 6 in | 7.2 in | 8.7 in |
Displacement | 1648 in³ | 1105 in³ | 5187 in³ |
Note | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model. | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. | - |
Rated Engine Speed | - | 1700 r/min | - |
Number of Cylinders | - | 6 | - |
Net Power - SAE J1349 | - | - | 2478 HP |
Rated Speed | - | - | 1750 r/min |
Emissions | - | - | Fuel Optimized |
Note (1) | - | - | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. |
Note (2) | - | - | EPA Tier 4 Final / EU Stage V available for applicable markets. |
Transmission |
|||
Forward - 1 | 6.6 mile/h | 8 mile/h | 8 mile/h |
Forward - 2 | 9.3 mile/h | 10.9 mile/h | 10.8 mile/h |
Forward - 3 | 12.6 mile/h | 14.8 mile/h | 14.8 mile/h |
Forward - 4 | 16.8 mile/h | 19.8 mile/h | 19.9 mile/h |
Forward - 5 | 22.8 mile/h | 26.9 mile/h | 27.1 mile/h |
Forward - 6 | 30.7 mile/h | 36.2 mile/h | 37.3 mile/h |
Forward - 7 | 41.6 mile/h | 49.2 mile/h | - |
Reverse | 8.7 mile/h | 10.4 mile/h | 7.3 mile/h |
Note | Maximum travel speeds with standard 24.00R35 (E4) tires | Maximum travel speeds with standard 21.00R33 (E4) tires. | - |
Top Speed - Loaded | - | - | 37.3 mile/h |
Brakes |
|||
Brake Surface - Front | 257 in² | 216 in² | 13921 in² |
Brake Surface - Rear | 9497 in² | 7794 in² | 20847 in² |
Standards | - | - | J-ISO 3450 JAN88, ISO 3450:1996 |
Service Refill Capacities |
|||
Fuel Tank Capacity | 210 gal (US) | 140 gal (US) | - |
Cooling System | 45 gal (US) | 33 gal (US) | 284 gal (US) |
Crankcase | 24 gal (US) | 17 gal (US) | 82 gal (US) |
Differential - Final Drives | 38 gal (US) | 47 gal (US) | - |
Steering System - Including Tank | 14 gal (US) | 60 gal (US) | 77 gal (US) |
Brake/Hoist Hydraulic Tank | 46.5 gal (US) | 38 gal (US) | - |
Brake Hoist System | 85 gal (US) | 60 gal (US) | - |
Torque Converter - Transmission System | - | 17 gal (US) | - |
Fuel Tank | - | - | 750 gal (US) |
Fuel Tank - Optional | - | - | 1300 gal (US) |
Diesel Exhaust Fluid Tank | - | - | 62 gal (US) |
Rear Axle - Housing | - | - | 260 gal (US) |
Brake Hoist System - Includes Tank | - | - | 347 gal (US) |
Torque Converter - Transmission Sump | - | - | 27 gal (US) |
Torque Converter/Transmission System - Including Sump | - | - | 55 gal (US) |
Note (1) | - | - | DEF Tank only available for EPA Tier 4 engine option. |
Weights - Approximate |
|||
Nominal Rated Payload | - | - | 256 ton (US) |
Rated Gross Machine Weight | - | - | 851000 lb |
Chassis Weight | - | - | 265639 lb |
Body Weight | - | - | 67682 lb |
Note (1) | - | - | Consult your tire manufacturer for maximum tire load |
Note (2) | - | - | Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. |
Note (3) | - | - | Refer to the Cat Mining Truck 10/10/20 Overload Policy for maximum gross machine weight limitations. |
Tires |
|||
Standard Tires | - | - | 40.00 R57 |
Rims | - | - | 29" or 32" |
Note | - | - | Quick Change Rims optional. |
Note (1) | - | - | Extended life wheel stations optional. |
Note (2) | - | - | Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. |
Suspension |
|||
Type | - | - | Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments |
Effective Cylinder Stroke - Front | - | - | 5.1 in |
Effective Cylinder Stroke - Rear | - | - | 4.2 in |
Rear axle - Oscillation | - | - | ±4.9 degrees |
Braking System |
|||
Service Brakes | - | - | Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated |
Front Wet Disc Brake Surface Area | - | - | 13921 in³ |
Rear - Wet Disc Brake Surface Area | - | - | 20847 in³ |
Standards | - | - | (Service and Secondary): ISO 3450:1996 |
Parking Brakes | - | - | Four-corner, Multi-disc, Spring Applied, Hydraulically Released |
Load Brake | - | - | Rear service brakes |
Note | - | - | Anti-Lock Brake System (ABS) optional with CMD package |
Body Hoists |
|||
Type | - | - | Twin, two-stage hydraulic cylinders with snubbing valve |
Pump Flow - High Idle | - | - | 224 gal/min |
Relief Valve Setting - Raise | - | - | 2955 psi |
Body Raise Time - High Idle | - | - | 19 s |
Body Lower Time - Float | - | - | 20 s |
Body Power Down - High Idle | - | - | 17.5 s |
Cab |
|||
Air Conditioning | - | - | Air Conditioning (HFC - 134A refrigerant): 24,300 Btu/hr |
Heater / Defroster | - | - | 38900 Btu/h |
Note | - | - | Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning. |
ROPS Standards (1) | - | - | The operator sound pressure level, 76 dB(A), complies with ISO 6394 and ISO 6396. |
ROPS Standards (2) | - | - | ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria. |
FOPS Standards | - | - | FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria. |
Capacity - HP Body - 100% Fill Factor |
|||
Struck | - | - | 112.6-151 m³ (147-197.5 yd³) |
Heaped (SAE 2:1)* | - | - | 162-191 m³ (212-250 yd³) |
Note (1) | - | - | Contact your local Cat dealer for body recommendation. |
Note (2) | - | - | *ISO 6483:1980 |
Weight Distributions - Approximate |
|||
Front Axle - Empty | - | - | 48 % |
Rear Axle - Empty | - | - | 52 % |
Front Axle - Loaded | - | - | 33 % |
Rear Axle - Loaded | - | - | 67 % |
Final Drives |
|||
Differential Ratio | - | - | 1.8:1 |
Planetary Ratio | - | - | 16:01 |
Total Reduction Ratio | - | - | 26.8:1 |
Capacity - MSD II - 100% Fill Factor |
|||
Struck | - | - | 112-142 m³ (146-186 yd³) |
Heaped (SAE 2:1) | - | - | 159-190 m3 (209-250 yd3) |
Note | - | - | Contact your local Cat dealer for body recommendation. |
Sound |
|||
Sound Standards | - | - | The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 76 dB(A) for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed. |
Sound Standards (1) | - | - | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. |
Add a Similar Product: