Compare Equipment Go Back

775G Off-Highway Truck
772G Off-Highway Truck
797F Mining Truck

Weights

LRC Bare Chassis Weight without Hoist 75118 lb 58414 lb -
LRC Bare Chassis Weight with Hoist 76326 lb 59223 lb -
LRC Gross Vehicle Weight (Target) without Hoist 246503 lb 180999 lb -
LRC Gross Vehicle Weight (Target) with Hoist 246503 lb 180999 lb -
HRC Bare Chassis Weight without Hoist 76573 lb 59567 lb -
HRC Bare Chassis Weight with Hoist 77781 lb 60376 lb -
HRC Gross Vehicle Weight (Target) without Hoist 246503 lb 180999 lb -
HRC Gross Vehicle Weight (Target) with Hoist 246503 lb 180999 lb -
Note LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. -

ROPS

Tractor ROPS 85288 lb 77430 lb -

Operating Specifications

Nominal Water Tank Capacity 15000 gal (US) 11000 gal (US) -

Steering

Steering Standards ISO 5010:2007 ISO 5010:2007 ISO 5010:2007
Steer Angle 31 ° 31 ° -
Turning Diameter 77.1 ft 57.7 ft -
Turning Circle - Clearance Diameter 85.6 ft 66.6 ft -
Steering Angle - - 40 °
Turning Diameter - Front - - 122.7 ft
Note - - Turning Diameter (ISO 7457:2009)

Engine

Engine Model Cat® C27 Cat® C18 Cat® C175-20
Gross Power - SAE J1995 825 HP 605 HP -
Rated Net Power - SAE J1349 683 HP 550 HP -
Bore 5.4 in 5.7 in -
Stroke 6 in 7.2 in -
Displacement 1648 in³ 1105 in³ 6469 in³
Note Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model. Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. -
Rated Engine Speed - 1700 r/min -
Number of Cylinders - 6 -
Rated Speed - - 1750 r/min
Emissions - - U.S. EPA Compliant. Where applicable, the Cat C175-20 engine is compliant with U.S. EPA emission standards.Tier 4 engine option available to meet Tier 4 Final emission standards.
Note (1) - - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
Note (2) - - U.S. EPA Tier 4 Final available for applicable markets.
Note (3) - - High Altitude Low Maintenance Ratio Engine Configuration (4x4) option available.

Transmission

Forward - 1 6.6 mile/h 8 mile/h 6.6 mile/h
Forward - 2 9.3 mile/h 10.9 mile/h 8.9 mile/h
Forward - 3 12.6 mile/h 14.8 mile/h 12 mile/h
Forward - 4 16.8 mile/h 19.8 mile/h 16.2 mile/h
Forward - 5 22.8 mile/h 26.9 mile/h -
Forward - 6 30.7 mile/h 36.2 mile/h 29.4 mile/h
Forward - 7 41.6 mile/h 49.2 mile/h 39.5 mile/h
Reverse 8.7 mile/h 10.4 mile/h 7.4 mile/h
Note Maximum travel speeds with standard 24.00R35 (E4) tires Maximum travel speeds with standard 21.00R33 (E4) tires. -
Top Speed - Loaded - - 39.5 mile/h

Brakes

Brake Surface - Front 257 in² 216 in² -
Brake Surface - Rear 9497 in² 7794 in² -

Service Refill Capacities

Fuel Tank Capacity 210 gal (US) 140 gal (US) -
Cooling System 45 gal (US) 33 gal (US) 306 gal (US)
Crankcase 24 gal (US) 17 gal (US) 103 gal (US)
Differential - Final Drives 38 gal (US) 47 gal (US) -
Steering System - Including Tank 14 gal (US) 60 gal (US) 95 gal (US)
Brake/Hoist Hydraulic Tank 46.5 gal (US) 38 gal (US) -
Brake Hoist System 85 gal (US) 60 gal (US) -
Torque Converter - Transmission System - 17 gal (US) -
Fuel Tank - - 1000 gal (US)
Fuel Tank (Tier 4) - - 1200 gal (US)
Diesel Exhaust Fluid Tank - - 100 gal (US)
Front Wheels - Each - - 16 gal (US)
Differentials - - 330 gal (US)
Steering Tank - - 67 gal (US)
Brake/Hoist Tank - - 203 gal (US)
Brake Hoist System - Includes Tank - - 489 gal (US)
Torque Converter Sump - - 80 gal (US)
Torque Converter/Transmission System - Including Sump - - 166 gal (US)
Note (1) - - DEF Tank only available for EPA Tier 4 engine option.

Weights - Approximate

Nominal Rated Payload - - 400 ton (US)
Rated Gross Machine Weight - - 1375000 lb
Chassis Weight - - 474472 lb
Body Weight - - 94799 lb
Note (1) - - Consult your tire manufacturer for maximum tire load
Note (2) - - Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
Note (4) - - Tier 4 Chassis Weight: 486263 lb (220565 kg)

Body Hoists

Type - - Twin, two-stage hydraulic cylinders with snubbing valve.
Pump Flow - High Idle - - 317 gal/min
Relief Valve Setting - Raise - - 3510 psi
Body Raise Time - High Idle - - 25 s
Body Lower Time - Float - - 18 s
Body Power Down- High Idle - - 18 s

Suspension

Type - - Self-contained nitrogen/oil cylinders, rear strut pin-to-pin mounting, top & bottom double shear clevis attachments
Effective Cylinder Stroke - Front - - 3.9 in
Effective Cylinder Stroke - Rear - - 3.7 in
Rear axle - Oscillation - - ±3.96 degrees

Weight Distributions - Approximate

Front Axle - Empty - - 47.20%
Rear Axle - Empty - - 52.80%
Front Axle - Loaded - - 33.30%
Rear Axle - Loaded - - 66.70%
Note - - Weight distributions optimized with Cat body.

Final Drives

Type - - Double reduction, planetary with full floating axles.
Differential Ratio - - 1.276:1
Planetary Ratio - - 16.67:1
Total Reduction Ratio - - 21.26:1
Note - - Double reduction, planetary with full floating axles.

Tires

Tires - - 59/80 R63
Rims - - 44" x 63"
Note - - Quick Change Rims optional.
Note (1) - - Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.

Braking System

Service Brakes - - Service Brakes: Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
Front Wet Disc Brake Surface Area - - 20500 in²
Rear - Wet Disc Brake Surface Area - - 30750 in²
Standards - - Service and Secondary: ISO 3450:2011
Parking Brake - - Four-corner, Multi-disc, Spring Applied, Hydraulically Released
Load Brake - - Rear service brakes
Note - - Anti-Lock Brake System (ABS) optional with CMD package

Capacity - HP Body - 100% Fill Factor

Struck - - 225 yd³ / 172 m³
Heaped (SAE 2:1)* - - 330 yd³ / 252 m³
Note (1) - - Consult your local Cat dealer for body recommendations.

Cab

Air Conditioning - - HFC - 134A refrigerant: 24,300 Btu/h
Heater / Defroster - - 38900 Btu/h
Note - - Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning.
ROPS Standards (1) - - The operator sound pressure level, 76 dB(A), complies with ISO 6394:2008 and ISO 6396:2008.
ROPS Standards (2) - - ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria.
FOPS Standards - - FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria.

Dimensions

Rear Axle - Clearance - Loaded - - 3.08 ft
Inside Body Depth - Maximum - - 11 ft
Overall Height - Body Raised - - 51.5 ft
Loaded Ground Clearance - - 2.58 ft
Loading Height - Empty - - 23 ft
Engine Guard Clearance - Loaded - - 3.33 ft
Height - Top of ROPS - Empty - - 21.4 ft
Front Canopy Height - Empty - - 25.33 ft
Overall Body Length - - 48.6 ft
Inside Body Length - - 32.75 ft
Overall Length - - 49.5 ft
Rear Axle - Tail - - 12.9 ft
Dump Clearance - - 6.58 ft
Centerline Front Tire Width - - 21.41 ft
Overall Canopy Width - - 29.91 ft
Outside Body Width - - 32 ft
Inside Body Width - - 27.91 ft
Centerline of Rear Dual Tire Width - - 20.41 ft
Overall Tire Width - - 31.25 ft
Add a Similar Product:
  • 775 Off-Highway Truck Add
  • 798 AC Electric Drive Mining Truck Add
  • 770 Off-Highway Truck Add
  • 772 (07) Off-Highway Truck Add
  • 796 AC Electric Drive Mining Truck Add
  • 794 AC Mining Truck Add
  • 793F Mining Truck Add
  • 785 Mining Truck (LRC, Tier 4 Final / EU Stage V) Add
  • 789 Next Generation Add