Compare Equipment Go Back
775G Off-Highway Truck |
797F Mining Truck |
770 Off-Highway Truck |
|
Weights |
|||
---|---|---|---|
LRC Bare Chassis Weight without Hoist | 75118 lb | - | - |
LRC Bare Chassis Weight with Hoist | 76326 lb | - | - |
LRC Gross Vehicle Weight (Target) without Hoist | 246503 lb | - | - |
LRC Gross Vehicle Weight (Target) with Hoist | 246503 lb | - | - |
HRC Bare Chassis Weight without Hoist | 76573 lb | - | - |
HRC Bare Chassis Weight with Hoist | 77781 lb | - | - |
HRC Gross Vehicle Weight (Target) without Hoist | 246503 lb | - | - |
HRC Gross Vehicle Weight (Target) with Hoist | 246503 lb | - | - |
Note | LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. | - | - |
ROPS |
|||
Tractor ROPS | 85288 lb | - | - |
ROPS Standards | - | - | Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. |
FOPS Standards | - | - | Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria. |
Operating Specifications |
|||
Nominal Water Tank Capacity | 15000 gal (US) | - | - |
Nominal Payload Class (100%) | - | - | 42.1 ton (US) |
Top Speed - Loaded | - | - | 45.8 mile/h |
Target Payload (100%) | - | - | 42.1 ton (US) |
Maximum Working Payload (110%) | - | - | 46.3 ton (US) |
Maximum Allowable Payload (120%)* | - | - | 50.5 ton (US) |
Body Capacity - SAE 2:1 | - | - | 32.9 yd³ |
Note (1) | - | - | *Refer to Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations. |
Note (2) | - | - | Target payload and capacity based on Dual Slope body with no liner. Attachment selection will affect payload and maximum gross machine operating weight. |
Steering |
|||
Steering Standards | ISO 5010:2007 | ISO 5010:2007 | ISO 5010:2007 |
Steer Angle | 31 ° | - | 40.5 ° |
Turning Diameter | 77.1 ft | - | - |
Turning Circle - Clearance Diameter | 85.6 ft | - | 66.6 ft |
Steering Angle | - | 40 ° | - |
Turning Diameter - Front | - | 122.7 ft | 57.7 ft |
Note | - | Turning Diameter (ISO 7457:2009) | Target gross machine operating weight is 71 214 kg (157,000 lb). |
Engine |
|||
Engine Model | Cat® C27 | Cat® C175-20 | Cat® C15 |
Gross Power - SAE J1995 | 825 HP | 4000 HP | 515 HP |
Rated Net Power - SAE J1349 | 683 HP | - | - |
Bore | 5.4 in | 6.9 in | 5.4 in |
Stroke | 6 in | 8.7 in | 6.7 in |
Displacement | 1648 in³ | 6469 in³ | 927.6 in³ |
Note | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model. | - | - |
Net Power - SAE J1349 | - | 3795 HP | 477 HP |
Rated Speed | - | 1750 r/min | - |
Emissions | - | U.S. EPA Compliant. Where applicable, the Cat C175-20 engine is compliant with U.S. EPA emission standards.Tier 4 engine option available to meet Tier 4 Final emission standards. | Meets U.S. EPA Tier 4 and EU Stage V emission standards. |
Note (1) | - | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. | Power rating applies at 1,700 rpm when tested under the specified condition for the specified standard. |
Note (2) | - | U.S. EPA Tier 4 Final available for applicable markets. | Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F). |
Note (3) | - | High Altitude Low Maintenance Ratio Engine Configuration (4x4) option available. | No engine derating required up to 3000 m (9,843 ft) altitude. |
Rated Engine Speed | - | - | 1700 r/min |
Net Power - ISO 9249 | - | - | 477 HP |
Net Power - 80/1269/EEC | - | - | 489 HP |
Net Power - ISO 14396 | - | - | 508 HP |
Net Torque - SAE J1349 | - | - | 1834 ft·lbf |
Number of Cylinders | - | - | 6 |
Note (4) | - | - | Meets Japan Small Volume Exemption. |
Transmission |
|||
Forward - 1 | 6.6 mile/h | 6.6 mile/h | 7.4 mile/h |
Forward - 2 | 9.3 mile/h | 8.9 mile/h | 10.1 mile/h |
Forward - 3 | 12.6 mile/h | 12 mile/h | 13.8 mile/h |
Forward - 4 | 16.8 mile/h | 16.2 mile/h | 18.5 mile/h |
Forward - 5 | 22.8 mile/h | 21.8 mile/h | 25.1 mile/h |
Forward - 6 | 30.7 mile/h | 29.4 mile/h | 33.8 mile/h |
Forward - 7 | 41.6 mile/h | 39.5 mile/h | 45.8 mile/h |
Reverse | 8.7 mile/h | 7.4 mile/h | 8.8 mile/h |
Note | Maximum travel speeds with standard 24.00R35 (E4) tires | - | Maximum travel speeds with standard 18.00R33 (E4) tires. |
Top Speed - Loaded | - | 39.5 mile/h | - |
Brakes |
|||
Brake Surface - Front | 257 in² | - | 216 in² |
Brake Surface - Rear | 9497 in² | - | 6235 in² |
Brake Standards | - | - | ISO 3450:2011 |
Note | - | - | Target gross machine operating weight is 71 214 kg (157,000 lb). |
Service Refill Capacities |
|||
Fuel Tank Capacity | 210 gal (US) | - | - |
Cooling System | 45 gal (US) | 306 gal (US) | 33 gal (US) |
Crankcase | 24 gal (US) | 103 gal (US) | 17 gal (US) |
Differential - Final Drives | 38 gal (US) | - | 47 gal (US) |
Steering System - Including Tank | 14 gal (US) | 95 gal (US) | 23 gal (US) |
Brake/Hoist Hydraulic Tank | 46.5 gal (US) | - | 38 gal (US) |
Brake Hoist System | 85 gal (US) | - | 60 gal (US) |
Fuel Tank | - | 1000 gal (US) | 140 gal (US) |
Fuel Tank (Tier 4) | - | 1200 gal (US) | - |
Diesel Exhaust Fluid Tank | - | 100 gal (US) | - |
Front Wheels - Each | - | 16 gal (US) | - |
Differentials | - | 330 gal (US) | - |
Steering Tank | - | 67 gal (US) | 14.5 gal (US) |
Brake/Hoist Tank | - | 203 gal (US) | - |
Brake Hoist System - Includes Tank | - | 489 gal (US) | - |
Torque Converter Sump | - | 80 gal (US) | - |
Torque Converter/Transmission System - Including Sump | - | 166 gal (US) | - |
Note (1) | - | DEF Tank only available for EPA Tier 4 engine option. | - |
Torque Converter - Transmission System | - | - | 17 gal (US) |
DEF Tank | - | - | 6 gal (US) |
Weights - Approximate |
|||
Nominal Rated Payload | - | 400 ton (US) | - |
Rated Gross Machine Weight | - | 1375000 lb | - |
Chassis Weight | - | 474472 lb | 55948 lb |
Body Weight | - | 94799 lb | 17306 lb |
Note (1) | - | Consult your tire manufacturer for maximum tire load | Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires. |
Note (2) | - | Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. | Body weight is the standard Dual Slope body with no liner and will vary depending on configuration. |
Note (4) | - | Tier 4 Chassis Weight: 486263 lb (220565 kg) | - |
Target Gross Machine Operating Weight | - | - | 157000 lb |
Target Gross Machine Weight | - | - | 157000 lb |
Body Hoists |
|||
Type | - | Twin, two-stage hydraulic cylinders with snubbing valve. | - |
Pump Flow - High Idle | - | 317 gal/min | 118 gal/min |
Relief Valve Setting - Raise | - | 3510 psi | 2750 psi |
Body Raise Time - High Idle | - | 25 s | 7.5 s |
Body Lower Time - Float | - | 18 s | 10 s |
Body Power Down- High Idle | - | 18 s | - |
Relief Valve Setting - Lower | - | - | 500 psi |
Body Power Down - High Idle | - | - | 10 s |
Suspension |
|||
Type | - | Self-contained nitrogen/oil cylinders, rear strut pin-to-pin mounting, top & bottom double shear clevis attachments | - |
Effective Cylinder Stroke - Front | - | 3.9 in | - |
Effective Cylinder Stroke - Rear | - | 3.7 in | - |
Rear axle - Oscillation | - | ±3.96 degrees | 8.9 ° |
Empty Loaded Cylinder Stroke Front | - | - | 9.2 in |
Empty Loaded Cylinder Stroke Rear | - | - | 5.9 in |
Weight Distributions - Approximate |
|||
Front Axle - Empty | - | 47.20% | 49 % |
Rear Axle - Empty | - | 52.80% | 51 % |
Front Axle - Loaded | - | 33.30% | 34 % |
Rear Axle - Loaded | - | 66.70% | 66 % |
Note | - | Weight distributions optimized with Cat body. | - |
Final Drives |
|||
Type | - | Double reduction, planetary with full floating axles. | - |
Differential Ratio | - | 1.276:1 | 1.92:1 |
Planetary Ratio | - | 16.67:1 | 4.80:1 |
Total Reduction Ratio | - | 21.26:1 | 9.26:1 |
Note | - | Double reduction, planetary with full floating axles. | - |
Tires |
|||
Tires | - | 59/80 R63 | - |
Rims | - | 44" x 63" | - |
Note | - | Quick Change Rims optional. | - |
Note (1) | - | Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. | Productive capabilities of the 770G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production. |
Standard Tire | - | - | 18.00R33 (E4) |
Note (2) | - | - | Caterpillar recommends the customer evaluates all job conditions and consults the tire manufacturer for proper tire selection. |
Braking System |
|||
Service Brakes | - | Service Brakes: Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated | - |
Front Wet Disc Brake Surface Area | - | 20500 in² | - |
Rear - Wet Disc Brake Surface Area | - | 30750 in² | - |
Standards | - | Service and Secondary: ISO 3450:2011 | - |
Parking Brake | - | Four-corner, Multi-disc, Spring Applied, Hydraulically Released | - |
Load Brake | - | Rear service brakes | - |
Note | - | Anti-Lock Brake System (ABS) optional with CMD package | - |
Capacity - HP Body - 100% Fill Factor |
|||
Struck | - | 225 yd³ / 172 m³ | - |
Heaped (SAE 2:1)* | - | 330 yd³ / 252 m³ | - |
Note (1) | - | Consult your local Cat dealer for body recommendations. | - |
Cab |
|||
Air Conditioning | - | HFC - 134A refrigerant: 24,300 Btu/h | - |
Heater / Defroster | - | 38900 Btu/h | - |
Note | - | Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning. | - |
ROPS Standards (1) | - | The operator sound pressure level, 76 dB(A), complies with ISO 6394:2008 and ISO 6396:2008. | - |
ROPS Standards (2) | - | ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria. | - |
FOPS Standards | - | FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria. | - |
Dimensions |
|||
Rear Axle - Clearance - Loaded | - | 3.08 ft | - |
Inside Body Depth - Maximum | - | 11 ft | 4.6 ft |
Overall Height - Body Raised | - | 51.5 ft | 27.1 ft |
Loaded Ground Clearance | - | 2.58 ft | - |
Loading Height - Empty | - | 23 ft | 10.3 ft |
Engine Guard Clearance - Loaded | - | 3.33 ft | - |
Height - Top of ROPS - Empty | - | 21.4 ft | - |
Front Canopy Height - Empty | - | 25.33 ft | - |
Overall Body Length | - | 48.6 ft | 26.8 ft |
Inside Body Length | - | 32.75 ft | 18.5 ft |
Overall Length | - | 49.5 ft | 28.9 ft |
Wheel Base | - | 23.58 ft | 13 ft |
Rear Axle - Tail | - | 12.9 ft | 8.5 ft |
Dump Clearance | - | 6.58 ft | 1.7 ft |
Centerline Front Tire Width | - | 21.41 ft | 10.2 ft |
Overall Canopy Width | - | 29.91 ft | - |
Outside Body Width | - | 32 ft | 12.9 ft |
Inside Body Width | - | 27.91 ft | 11.9 ft |
Centerline of Rear Dual Tire Width | - | 20.41 ft | 8.3 ft |
Overall Tire Width | - | 31.25 ft | 12.1 ft |
Height - Top of ROPS | - | - | 12.7 ft |
Ground Clearance | - | - | 1.6 ft |
Operating Width | - | - | 15.7 ft |
Engine Guard Clearance | - | - | 1.8 ft |
Front Canopy Height | - | - | 13.5 ft |
Rear Axle - Clearance | - | - | 1.8 ft |
Capacity - Dual Slope - 100% Fill Factor |
|||
Struck | - | - | 23.01 yd³ |
Heaped (SAE 2:1)* | - | - | 32.9 yd³ |
Note (2) | - | - | *ISO 6483:1980. |
Note (1) | - | - | Contact your local Cat dealer for body recommendation. |
Capacity - Flat Floor - 100% Fill Factor |
|||
Struck | - | - | 23.01 yd³ |
Heaped (SAE 2:1)* | - | - | 32.9 yd³ |
Note (1) | - | - | Contact your local Cat dealer for body recommendation. |
Note (2) | - | - | *ISO 6483:1980. |
Sound |
|||
Sound Standards (1) | - | - | Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. |
Sound Standards (2) | - | - | Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 116 dB(A). |
Sound Standards (3) | - | - | Operator Equivalent Sound Pressure Level is 79 dB(A) & 74 dB(A) with EU sound suppression applied when ISO 6396:2008 is used. |
Add a Similar Product: