Compare

Compare Equipment Go Back

Weights
	775G Off-Highway Truck View Product	772 (07) Off-Highway Truck View Product Remove	793F Mining Truck View Product Remove	798 AC Electric Drive Mining Truck View Product Remove	775 Off-Highway Truck View Product Remove
LRC Bare Chassis Weight without Hoist	75118 lb	-	-	-	-
LRC Bare Chassis Weight with Hoist	76326 lb	-	-	-	-
LRC Gross Vehicle Weight (Target) without Hoist	246503 lb	-	-	-	-
LRC Gross Vehicle Weight (Target) with Hoist	246503 lb	-	-	-	-
HRC Bare Chassis Weight without Hoist	76573 lb	-	-	-	-
HRC Bare Chassis Weight with Hoist	77781 lb	-	-	-	-
HRC Gross Vehicle Weight (Target) without Hoist	246503 lb	-	-	-	-
HRC Gross Vehicle Weight (Target) with Hoist	246503 lb	-	-	-	-
Note	LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.	-	-	-	-
ROPS
Tractor ROPS	85288 lb	-	-	-	-
FOPS Standards	-	FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II FOPS criteria.	FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II FOPS criteria.	-	Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.
ROPS Standards	-	ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.	ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:1994 ROPS criteria.	-	Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.
Operating Specifications
Nominal Water Tank Capacity	15000 gal (US)	-	-	-	-
Nominal Payload Class (100%)	-	51.6 ton (US)	-	-	70.5 ton (US)
Top Speed - Loaded	-	49.2 mile/h	-	-	41.6 mile/h
Maximum Payload Class (110%)	-	56.7 ton (US)	-	-	-
Body Capacity - SAE 2:1	-	40.8 yd³	-	-	55.23 yd³
Target Payload Capacity	-	51.6 ton (US)	-	-	-
Not to Exceed Payload (120%)	-	61.9 ton (US)	-	-	-
Body Capacity (SAE 2:1)**	-	40.8 yd³	-	-	-
Maximum Working Payload (110%)	-	-	-	-	77.5 ton (US)
Target Payload (100%)	-	-	-	-	70.5 ton (US)
Maximum Allowable Payload (120%)*	-	-	-	-	84.6 ton (US)
Note (2)	-	-	-	-	* Refer to the Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations.
Note (1)	-	-	-	-	Capacity with Dual Slope body – no liner.
Steering
Steering Standards	ISO 5010:2007	ISO 5010:2007	SAE J15111 OCT90, ISO 5010:1992	Steering Standards: ISO 5010:2007	ISO 5010:2007
Steer Angle	31 °	40.5 °	36 °	39 °	31 °
Turning Diameter	77.1 ft	-	-	-	-
Turning Circle - Clearance Diameter	85.6 ft	66.6 ft	-	-	85.6 ft
Turning Diameter - Front	-	57.7 ft	93.2 ft	106.3 ft	77.1 ft
Note	-	-	-	Turning Diameter (ISO 7457:1997)	-
Engine
Engine Model	Cat® C27	Cat® C18	Cat® C175-16	Cat® C175-16	Cat® C27
Gross Power - SAE J1995	825 HP	605 HP	2650 HP	3500 HP	825 HP
Rated Net Power - SAE J1349	683 HP	-	-	-	-
Bore	5.4 in	5.7 in	6.9 in	6.9 in	5.4 in
Stroke	6 in	7.2 in	8.7 in	8.7 in	6 in
Displacement	1648 in³	1105 in³	5187 in³	5187 in³	1648 in³
Note	Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model.	-	-	-	-
Rated Engine Speed	-	1700 r/min	-	-	1800 r/min
Net Power - SAE J1349	-	550 HP	2478 HP	3405 HP	768 HP
Net Power - ISO 9249	-	550 HP	-	-	775 HP
Number of Cylinders	-	6	-	-	-
Net Torque - SAE J1349	-	2221 ft-lb	-	-	-
Engine Power - ISO 14396	-	598 HP	-	-	812 HP
Rated Speed	-	-	1750 r/min	1800 r/min	-
Emissions	-	-	Fuel Optimized	-	Meets EU Stage V emission standards.
Note (1)	-	-	Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.	Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.	Power rating applies at 2,000 rpm when tested under the specified condition for the specified standard.
Note (2)	-	-	EPA Tier 4 Final / EU Stage V available for applicable markets.	U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.	Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
Optional Gross Power - SAE J1995	-	-	-	3100 HP	-
Emissions Rating	-	-	-	Fuel Optimized	-
Note (3)	-	-	-	Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp	No engine derating required up to 3810 m (12,500 ft) for Tier 2 Equivalent.
Net Power - 80/1269/EEC	-	-	-	-	775 HP
Net Torque	-	-	-	-	3148 ft-lb
Peak Torque - Speed	-	-	-	-	1200 r/min
Transmission
Forward - 1	6.6 mile/h	8 mile/h	8 mile/h	-	6.6 mile/h
Forward - 2	9.3 mile/h	10.9 mile/h	10.8 mile/h	-	9.3 mile/h
Forward - 3	12.6 mile/h	14.8 mile/h	14.8 mile/h	-	12.6 mile/h
Forward - 4	16.8 mile/h	19.8 mile/h	19.9 mile/h	-	16.8 mile/h
Forward - 5	22.8 mile/h	26.9 mile/h	27.1 mile/h	-	22.8 mile/h
Forward - 6	30.7 mile/h	36.2 mile/h	37.3 mile/h	-	30.7 mile/h
Forward - 7	41.6 mile/h	49.2 mile/h	-	-	41.6 mile/h
Reverse	8.7 mile/h	10.4 mile/h	7.3 mile/h	-	8.7 mile/h
Note	Maximum travel speeds with standard 24.00R35 (E4) tires	-	-	-	Maximum travel speeds with standard 24.00R35 (E4) tires.
Top Speed - Loaded	-	-	37.3 mile/h	-	-
Brakes
Brake Surface - Front	257 in²	216 in²	13921 in²	-	257 in²
Brake Surface - Rear	9497 in²	7794 in²	20847 in²	-	9497 in²
Brake Standards	-	ISO 3450:1996	-	-	ISO 3450:2011
Standards	-	-	J-ISO 3450 JAN88, ISO 3450:1996	-	-
Service Refill Capacities
Fuel Tank Capacity	210 gal (US)	-	-	-	-
Cooling System	45 gal (US)	33 gal (US)	284 gal (US)	211 gal (US)	45 gal (US)
Crankcase	24 gal (US)	17 gal (US)	82 gal (US)	82 gal (US)	24 gal (US)
Differential - Final Drives	38 gal (US)	47 gal (US)	-	-	38 gal (US)
Steering System - Including Tank	14 gal (US)	23 gal (US)	77 gal (US)	-	14 gal (US)
Brake/Hoist Hydraulic Tank	46.5 gal (US)	38 gal (US)	-	-	46.5 gal (US)
Brake Hoist System	85 gal (US)	60 gal (US)	-	-	85 gal (US)
Fuel Tank	-	140 gal (US)	750 gal (US)	1300 gal (US)	210 gal (US)
Steering Tank	-	14.5 gal (US)	-	-	9.5 gal (US)
Torque Converter - Transmission System	-	17 gal (US)	-	-	-
DEF Tank	-	6 gal (US)	-	-	-
Fuel Tank - Optional	-	-	1300 gal (US)	-	-
Diesel Exhaust Fluid Tank	-	-	62 gal (US)	100 gal (US)	-
Rear Axle - Housing	-	-	260 gal (US)	-	-
Brake Hoist System - Includes Tank	-	-	347 gal (US)	-	-
Torque Converter - Transmission Sump	-	-	27 gal (US)	-	-
Torque Converter/Transmission System - Including Sump	-	-	55 gal (US)	-	-
Note (1)	-	-	DEF Tank only available for EPA Tier 4 engine option.	DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option	-
Fuel Tank (Tier 4)	-	-	-	1200 gal (US)	-
Final Drive - Each	-	-	-	67 gal (US)	-
Hydraulic System - Including Tank	-	-	-	385 gal (US)	-
Hydraulic Tank	-	-	-	296 gal (US)	-
Grease Tank	-	-	-	90 lb	-
Torque Converter - Transmission System - LRC	-	-	-	-	16 gal (US)
Torque Converter - Transmission System - HRC	-	-	-	-	18 gal (US)
Weights - Approximate
Target Gross Machine Operating Weight	-	181000 lb	-	-	-
Chassis Weight	-	59223 lb	265639 lb	453826 lb	-
Body Weight	-	17306 lb	67682 lb	-	-
Target Gross Machine Weight	-	181000 lb	-	-	-
Nominal Rated Payload	-	-	256 ton (US)	410 ton (US)	-
Rated Gross Machine Weight	-	-	851000 lb	1375000 lb	-
Note (1)	-	-	Consult your tire manufacturer for maximum tire load	Consult your tire manufacturer for maximum tire load.	-
Note (2)	-	-	Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.	Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires.	-
Note (3)	-	-	Refer to the Cat Mining Truck 10/10/20 Overload Policy for maximum gross machine weight limitations.	Body weight varies depending on how body is equipped.	-
Body Weight Range	-	-	-	38 833 - 43 275 kg (85,611 - 95,406 lb)	-
Maximum Gross Vehicle Weight	-	-	-	-	246503 lb
Weight Distributions - Approximate
Front Axle - Empty	-	51.4 %	48 %	47 %	50 %
Front Axle - Loaded	-	34.2 %	33 %	33 %	34 %
Rear Axle - Empty	-	48.6 %	52 %	53 %	50 %
Rear Axle - Loaded	-	65.8 %	67 %	67 %	66 %
Note	-	-	-	Weight distributions optimized with Cat body.	-
Final Drives
Differential Ratio	-	2.74:1	1.8:1	-	3.64:1
Planetary Ratio	-	4.80:1	16:01	-	4.80:1
Total Reduction Ratio	-	13.14:1	26.8:1	-	17.49:1
Body Hoists
Pump Flow - High Idle	-	112 gal/min	224 gal/min	257.3 gal/min	118 gal/min
Relief Valve Setting - Raise	-	2750 psi	2955 psi	3029 psi	2502 psi
Relief Valve Setting - Lower	-	500 psi	-	-	500 psi
Body Raise Time - High Idle	-	8 s	19 s	21 s	10 s
Body Lower Time - Float	-	10 s	20 s	22 s	14 s
Body Power Down - High Idle	-	10 s	17.5 s	-	14 s
Type	-	-	Twin, two-stage hydraulic cylinders with snubbing valve	Twin, two-stage hydraulic cylinders with snubbing valve.	-
Body Power Down- High Idle	-	-	-	17.5 s	-
Note (1)	-	-	-	Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages.	-
Note (2)	-	-	-	Power raise in both stages; power down capability in both stages.	-
Note (3)	-	-	-	Automatic body-lower modulation reduces impact on frame.	-
Suspension
Rear axle - Oscillation	-	8.9 °	±4.9 degrees	-	8.1°
Empty Loaded Cylinder Stroke Front	-	9.2 in	-	-	9.2 in
Empty Loaded Cylinder Stroke Rear	-	5.8 in	-	-	5.8 in
Type	-	-	Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments	Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments	-
Effective Cylinder Stroke - Front	-	-	5.1 in	10 in	-
Effective Cylinder Stroke - Rear	-	-	4.2 in	5 in	-
Capacity - Dual Slope - 100% Fill Factor
Heaped 2:1 (SAE)	-	40.8 yd³	-	-	-
Struck	-	31.3 yd³	-	-	42.7 yd³
Heaped (SAE 2:1)*	-	-	-	-	55.5 yd³
Note (1)	-	-	-	-	Contact your local Cat dealer for body recommendation.
Note (2)	-	-	-	-	*ISO 6483:1980
Capacity - Flat Floor - 100% Fill Factor
Struck	-	31.3 yd³	-	-	42.2 yd³
Heaped 2:1 (SAE)	-	40.9 yd³	-	-	-
Heaped (SAE 2:1)*	-	-	-	-	55.2 yd³
Note (1)	-	-	-	-	Contact your local Cat dealer for body recommendation.
Note (2)	-	-	-	-	*ISO 6483:1980
Sound
Sound Standards (3)	-	Operator Equivalent Sound Pressure Level (Leq) is 78 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab.	-	-	Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Sound Standards (2)	-	Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 118 dB(A).	-	-	The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid‑gear moving operation is 86 dB(A).
Sound Standards (1)	-	Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.	Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.	-	The operator Equivalent Sound Pressure Level (Leq) is 76 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with t
Sound Standards	-	-	The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 76 dB(A) for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed.	The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008.	-
Dimensions
Height - Top of ROPS	-	12.8 ft	-	-	-
Inside Body Depth - Maximum	-	5.7 ft	-	-	-
Overall Body Length	-	26.8 ft	-	-	-
Inside Body Length	-	19 ft	-	-	-
Overall Length	-	28.9 ft	-	-	-
Wheel Base	-	13 ft	-	-	-
Rear Axle - Tail	-	9.5 ft	-	-	-
Ground Clearance	-	1.6 ft	-	-	-
Dump Clearance	-	1.5 ft	-	-	-
Loading Height - Empty	-	11.6 ft	-	-	-
Overall Height - Body Raised	-	27.1 ft	-	-	-
Operating Width	-	15.7 ft	-	-	-
Centerline Front Tire Width	-	10.4 ft	-	-	-
Engine Guard Clearance	-	2 ft	-	-	-
Outside Body Width	-	12.9 ft	-	-	-
Inside Body Width	-	11.9 ft	-	-	-
Front Canopy Height	-	13.7 ft	-	-	-
Rear Axle - Clearance	-	1.9 ft	-	-	-
Centerline of Rear Dual Tire Width	-	8.7 ft	-	-	-
Overall Tire Width	-	12.9 ft	-	-	-
Tires
Standard Tire	-	21.00R33 (E4)	-	-	24.00R35 (E4)
Standard Tires	-	-	40.00 R57	59/80 R63	-
Rims	-	-	29" or 32"	44" x 63" Rims	-
Note	-	-	Quick Change Rims optional.	-	-
Note (1)	-	-	Extended life wheel stations optional.	Quick Change Rims optional.	Productive capabilities of the 775G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.
Note (2)	-	-	Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.	Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.	Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection.
Braking System
Service Brakes	-	-	Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated	Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated	-
Front Wet Disc Brake Surface Area	-	-	13921 in³	22642 in²	-
Rear - Wet Disc Brake Surface Area	-	-	20847 in³	32730 in²	-
Standards	-	-	(Service and Secondary): ISO 3450:1996	Service and Secondary: ISO 3450:2011	-
Parking Brakes	-	-	Four-corner, Multi-disc, Spring Applied, Hydraulically Released	Four-corner, Multi-disc, Spring Applied, Hydraulically Released	-
Load Brake	-	-	Rear service brakes	Rear service brakes	-
Note	-	-	Anti-Lock Brake System (ABS) optional with CMD package	Anti-Lock Brake System (ABS) optional with CMD package	-
Electric Retarding	-	-	-	Radial Grid Design	-
Dynamic Retarding Power - Continuous	-	-	-	5480 HP	-
Cab
Air Conditioning	-	-	Air Conditioning (HFC - 134A refrigerant): 24,300 Btu/hr	HFC - 134A refrigerant: 21,600 Btu/h	-
Heater / Defroster	-	-	38900 Btu/h	24600 Btu/h	-
Note	-	-	Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning.	Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning.	-
ROPS Standards (1)	-	-	The operator sound pressure level, 76 dB(A), complies with ISO 6394 and ISO 6396.	ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.	-
ROPS Standards (2)	-	-	ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria.	-	-
FOPS Standards	-	-	FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria.	FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.	-
Capacity - HP Body - 100% Fill Factor
Struck	-	-	112.6-151 m³ (147-197.5 yd³)	-	-
Heaped (SAE 2:1)*	-	-	162-191 m³ (212-250 yd³)	-	-
Note (1)	-	-	Contact your local Cat dealer for body recommendation.	-	-
Note (2)	-	-	*ISO 6483:1980	-	-
Capacity - MSD II - 100% Fill Factor
Struck	-	-	112-142 m³ (146-186 yd³)	-	-
Heaped (SAE 2:1)	-	-	159-190 m3 (209-250 yd3)	-	-
Note	-	-	Contact your local Cat dealer for body recommendation.	-	-
Service Refill Capacities - High Altitude Only
Fuel Tank	-	-	-	2000 gal (US)	-
Cooling System	-	-	-	273 gal (US)	-
Crankcase	-	-	-	124 gal (US)	-
Hydraulic Tank	-	-	-	273 gal (US)	-
Hydraulic System (includes tank)	-	-	-	342 gal (US)	-
AC Drive System
Total Reduction Ratio	-	-	-	35:01:00	-
Top Speed - Loaded	-	-	-	40 mile/h	-
Generator/Alternator	-	-	-	Brushless, engine mounted, dual bearing	-
Controls	-	-	-	IGBT Inverter Technology, air cooled, pressurized cabinet with filtration	-
Wheel Motor	-	-	-	Cat high-torque AC induction, rear axle mounted	-
Cooling System	-	-	-	Cat variable speed, hydraulically driven cooling system	-
Capacity - HE Body - 100% fill factor
Struck	-	-	-	129-200 m³ (168-261 yd³)	-
Heaped (SAE 2:1)	-	-	-	218-276 m³ (285-361 yd³)	-
Note	-	-	-	Contact your local Cat dealer for body recommendations.	-
Engine - High Altitude Only
Engine Model	-	-	-	Cat® C175-20	-
Gross Power SAE J1995:2014	-	-	-	4150 HP	-
Net Power - SAE J1349:2011	-	-	-	4000 HP	-
Rated Speed	-	-	-	1750 r/min	-
Emissions Rating	-	-	-	Fuel Optimized	-
Bore	-	-	-	6.9 in	-
Stroke	-	-	-	8.7 in	-
Displacement	-	-	-	6469 in³	-
Note 1	-	-	-	Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.	-
Note 2	-	-	-	Additional fuel optimized selectable power rating: 2983 kW / 4,000 hp	-
Dimensions (Approximate)
Height - Top of ROPS	-	-	-	22.1 ft	-
Overall Length	-	-	-	51.44 ft	-
Wheel Base	-	-	-	21.9 ft	-
Rear Axle - Tail	-	-	-	16.07 ft	-
Dump Clearance - Empty	-	-	-	5.72 ft	-
Loading Height - Empty	-	-	-	25.54 ft	-
Overall Height - Body Raised	-	-	-	48.85 ft	-
Centerline Front Tire Width	-	-	-	23.06 ft	-
Front Axle Clearance - Loaded	-	-	-	2.81 ft	-
Overall Canopy Width (with rock deflectors)	-	-	-	33.15 ft	-
Outside Body/Canopy Width (without rock deflectors)	-	-	-	31.62 ft	-
Inside Body Width	-	-	-	29.44 ft	-
Front Canopy Height - Empty	-	-	-	26.01 ft	-
Rear Axle Clearance - Loaded	-	-	-	2.8 ft	-
Centerline of Rear Dual Tire Width	-	-	-	19.5 ft	-
Overall Tire Width - Empty	-	-	-	30.27 ft	-
Overall Length (High Altitude only)	-	-	-	51.87 ft	-
Note	-	-	-	Dimensions listed includes canopy deflectors	-
Sustainability
Recyclability	-	-	-	-	98%

Compare Equipment Go Back

775G Off-Highway Truck

772 (07) Off-Highway Truck

793F Mining Truck

798 AC Electric Drive Mining Truck

775 Off-Highway Truck

Weights

ROPS

Operating Specifications

Steering

Engine

Transmission

Brakes

Service Refill Capacities

Weights - Approximate

Weight Distributions - Approximate

Final Drives

Body Hoists

Suspension

Capacity - Dual Slope - 100% Fill Factor

Capacity - Flat Floor - 100% Fill Factor

Sound

Dimensions

Tires

Braking System

Cab

Capacity - HP Body - 100% Fill Factor

Capacity - MSD II - 100% Fill Factor

Service Refill Capacities - High Altitude Only

AC Drive System

Capacity - HE Body - 100% fill factor

Engine - High Altitude Only

Dimensions (Approximate)

Sustainability

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us