CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    775G Off-Highway Truck
    View Product
    785 Mining Truck (LRC, Tier 4 Final / EU Stage V)
    View Product Remove
    797F Mining Truck
    View Product Remove
    772 (07) Off-Highway Truck
    View Product Remove

    Weights
    LRC Bare Chassis Weight without Hoist 75118 lb - - -
    LRC Bare Chassis Weight with Hoist 76326 lb - - -
    LRC Gross Vehicle Weight (Target) without Hoist 246503 lb - - -
    LRC Gross Vehicle Weight (Target) with Hoist 246503 lb - - -
    HRC Bare Chassis Weight without Hoist 76573 lb - - -
    HRC Bare Chassis Weight with Hoist 77781 lb - - -
    HRC Gross Vehicle Weight (Target) without Hoist 246503 lb - - -
    HRC Gross Vehicle Weight (Target) with Hoist 246503 lb - - -
    Note LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. - - -

    ROPS
    Tractor ROPS 85288 lb - - -
    FOPS Standards - - - FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II FOPS criteria.
    ROPS Standards - - - ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.

    Operating Specifications
    Nominal Water Tank Capacity 15000 gal (US) - - -
    Nominal Payload Class (100%) - - - 51.6 ton (US)
    Top Speed - Loaded - - - 49.2 mile/h
    Maximum Payload Class (110%) - - - 56.7 ton (US)
    Body Capacity - SAE 2:1 - - - 40.8 yd³
    Target Payload Capacity - - - 51.6 ton (US)
    Not to Exceed Payload (120%) - - - 61.9 ton (US)
    Body Capacity (SAE 2:1)** - - - 40.8 yd³

    Steering
    Steering Standards ISO 5010:2007 ISO 5010:2007 ISO 5010:2007 ISO 5010:2007
    Steer Angle 31 ° 36 ° - 40.5 °
    Turning Diameter 77.1 ft - - -
    Turning Circle - Clearance Diameter 85.6 ft - - 66.6 ft
    Turning Diameter - ISO 7457:1997 (33.00R51 tires) - 97.75 ft - -
    Steering Angle - - 40 ° -
    Turning Diameter - Front - - 122.7 ft 57.7 ft
    Note - - Turning Diameter (ISO 7457:2009) -

    Engine
    Engine Model Cat® C27 Cat� 3512E Cat® C175-20 Cat® C18
    Gross Power - SAE J1995 825 HP 1600 HP 4000 HP 605 HP
    Rated Net Power - SAE J1349 683 HP - - -
    Bore 5.4 in 6.7 in 6.9 in 5.7 in
    Stroke 6 in 8.5 in 8.7 in 7.2 in
    Displacement 1648 in³ 3573 in³ 6469 in³ 1105 in³
    Note Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model. - - -
    Net Power - SAE J1349 - 1509 HP 3795 HP 550 HP
    Emissions Rating - Fuel Optimized - -
    Note (1) - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. -
    Note (2) - U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. U.S. EPA Tier 4 Final available for applicable markets. -
    Note (3) - Additional fuel optimized selectable power ratings: 1,450 hp High Altitude Low Maintenance Ratio Engine Configuration (4x4) option available. -
    Rated Speed - - 1750 r/min -
    Emissions - - U.S. EPA Compliant. Where applicable, the Cat C175-20 engine is compliant with U.S. EPA emission standards.Tier 4 engine option available to meet Tier 4 Final emission standards. -
    Rated Engine Speed - - - 1700 r/min
    Net Power - ISO 9249 - - - 550 HP
    Number of Cylinders - - - 6
    Net Torque - SAE J1349 - - - 2221 ft-lb
    Engine Power - ISO 14396 - - - 598 HP

    Transmission
    Forward - 1 6.6 mile/h 7.5 mile/h 6.6 mile/h 8 mile/h
    Forward - 2 9.3 mile/h 10.2 mile/h 8.9 mile/h 10.9 mile/h
    Forward - 3 12.6 mile/h 13.8 mile/h 12 mile/h 14.8 mile/h
    Forward - 4 16.8 mile/h 18.6 mile/h 16.2 mile/h 19.8 mile/h
    Forward - 5 22.8 mile/h 25.2 mile/h 21.8 mile/h 26.9 mile/h
    Forward - 6 30.7 mile/h 34 mile/h 29.4 mile/h 36.2 mile/h
    Forward - 7 41.6 mile/h - 39.5 mile/h 49.2 mile/h
    Reverse 8.7 mile/h 6.8 mile/h 7.4 mile/h 10.4 mile/h
    Note Maximum travel speeds with standard 24.00R35 (E4) tires Maximum travel speeds with standard 33.00-R51 tires. - -
    Top Speed - Loaded - 34 mile/h 39.5 mile/h -

    Brakes
    Brake Surface - Front 257 in² - - 216 in²
    Brake Surface - Rear 9497 in² - - 7794 in²
    Brake Standards - - - ISO 3450:1996

    Service Refill Capacities
    Fuel Tank Capacity 210 gal (US) - - -
    Cooling System 45 gal (US) 100 gal (US) 306 gal (US) 33 gal (US)
    Crankcase 24 gal (US) 54 gal (US) 103 gal (US) 17 gal (US)
    Differential - Final Drives 38 gal (US) 139 gal (US) - 47 gal (US)
    Steering System - Including Tank 14 gal (US) - 95 gal (US) 23 gal (US)
    Brake/Hoist Hydraulic Tank 46.5 gal (US) - - 38 gal (US)
    Brake Hoist System 85 gal (US) - - 60 gal (US)
    Fuel Tank - 410 gal (US) 1000 gal (US) 140 gal (US)
    Diesel Exhaust Fluid Tank - 36 gal (US) 100 gal (US) -
    Front Wheels - Each - 8 gal (US) 16 gal (US) -
    Steering Tank - 29 gal (US) 67 gal (US) 14.5 gal (US)
    Steering System - Includes Tank - 45 gal (US) - -
    Brake/Hoist Tank - 135 gal (US) 203 gal (US) -
    Brake Hoist System - Includes Tank - 160 gal (US) 489 gal (US) -
    Torque Converter - Transmission System - Including Sump - 46 gal (US) - -
    Fuel Tank (Tier 4) - - 1200 gal (US) -
    Differentials - - 330 gal (US) -
    Torque Converter Sump - - 80 gal (US) -
    Torque Converter/Transmission System - Including Sump - - 166 gal (US) -
    Note (1) - - DEF Tank only available for EPA Tier 4 engine option. -
    Torque Converter - Transmission System - - - 17 gal (US)
    DEF Tank - - - 6 gal (US)

    Weights - Approximate
    Nominal Rated Payload (33.00R51 Tires) - 153 ton (US) - -
    Rated Gross Machine Weight (33.00R51 tires) - 550000 lb - -
    Nominal Rated Payload (36.00R51 Tires) - 157 ton (US) - -
    Rated Gross Machine Weight (36.00R51 tires) - 564000 lb - -
    Chassis Weight (33.00R51 Tires) - 186799 lb - -
    Chassis Weight (36.00R51 Tires) - 193192 lb - -
    Body Weight - 57779 lb 94799 lb 17306 lb
    Note (1) - Consult your tire manufacturer for maximum tire load Consult your tire manufacturer for maximum tire load -
    Note (2) - Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. -
    Note (3) - Body weight varies depending on body selection and configuration. - -
    Nominal Rated Payload - - 400 ton (US) -
    Rated Gross Machine Weight - - 1375000 lb -
    Chassis Weight - - 474472 lb 59223 lb
    Note (4) - - Tier 4 Chassis Weight: 486263 lb (220565 kg) -
    Target Gross Machine Operating Weight - - - 181000 lb
    Target Gross Machine Weight - - - 181000 lb

    Weight Distributions - Approximate
    Front Axle - Empty - 48% 47.20% 51.4 %
    Rear Axle - Empty - 52% 52.80% 48.6 %
    Front Axle - Loaded - 33% 33.30% 34.2 %
    Rear Axle - Loaded - 67% 66.70% 65.8 %
    Note - Weight distributions optimized with Cat body. Weight distributions optimized with Cat body. -

    Final Drives
    Type - Double reduction, planetary with full floating axles. Double reduction, planetary with full floating axles. -
    Differential Ratio - 2:10:01 1.276:1 2.74:1
    Planetary Ratio - 10.83:1 16.67:1 4.80:1
    Total Reduction Ratio - 22.75:1 21.26:1 13.14:1
    Note - - Double reduction, planetary with full floating axles. -

    Tires
    Standard Tire - 33.00R51 - 21.00R33 (E4)
    Optional Tire - 36.00R51 - -
    Rims - 610 mm (24") Rims (standard). 660 mm (26") Rims (optional). 44" x 63" -
    Note (1) - Quick Change Rims optional. Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. -
    Note (2) - Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. - -
    Tires - - 59/80 R63 -
    Note - - Quick Change Rims optional. -

    Braking System
    Service Brakes - Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated Service Brakes: Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated -
    Front Wet Disc Brake Surface Area - 9487 in² 20500 in² -
    Rear - Wet Disc Brake Surface Area - 13908 in² 30750 in² -
    Standards - Service and Secondary: ISO 3450:2011 Service and Secondary: ISO 3450:2011 -
    Parking Brake - Four corner, multi disc, spring applied, hydraulically released Four-corner, Multi-disc, Spring Applied, Hydraulically Released -
    Load Brake - - Rear service brakes -
    Note - - Anti-Lock Brake System (ABS) optional with CMD package -

    Capacity - MSD II - 100% Fill Factor
    Struck - 72 m^3 / 94 yd^3 - -
    Heaped (SAE 2:1) - 99 m^3 / 129 yd^3 - -
    Note - Consult your local Cat dealer for body recommendations. - -

    Body Hoists
    Type - Twin, two-stage hydraulic cylinders with snubbing valve. Twin, two-stage hydraulic cylinders with snubbing valve. -
    Pump Flow - High Idle - 192.7 gal/min 317 gal/min 112 gal/min
    Relief Valve Setting - Raise - 2500 psi 3510 psi 2750 psi
    Body Raise Time - High Idle - 15.2 s 25 s 8 s
    Body Lower Time - Float High Idle - 15.9 s - -
    Body Lower Time - Float Low Idle - 16.2 s - -
    Body Power Down- High Idle - 15.9 s 18 s -
    Body Lower Time - Float - - 18 s 10 s
    Relief Valve Setting - Lower - - - 500 psi
    Body Power Down - High Idle - - - 10 s

    Suspension
    Type - Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments Self-contained nitrogen/oil cylinders, rear strut pin-to-pin mounting, top & bottom double shear clevis attachments -
    Effective Cylinder Stroke - Front - 12.6 in 3.9 in -
    Effective Cylinder Stroke - Rear - 6.5 in 3.7 in -
    Rear axle - Oscillation - +/- 5 degrees ±3.96 degrees 8.9 °
    Empty Loaded Cylinder Stroke Front - - - 9.2 in
    Empty Loaded Cylinder Stroke Rear - - - 5.8 in

    Cab
    Air Conditioning - HFC - 134A refrigerant: 24,500 Btu/h HFC - 134A refrigerant: 24,300 Btu/h -
    Heater / Defroster - 33300 Btu/h 38900 Btu/h -
    Note - The operator sound pressure level, 77 dB(A) with direct drive and 75 dB9A) with optional clutch, tested to ISO 6396:2008. Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning. -
    ROPS Standards (1) - ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. The operator sound pressure level, 76 dB(A), complies with ISO 6394:2008 and ISO 6396:2008. -
    FOPS Standards - FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria. -
    ROPS Standards (2) - - ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria. -

    Dimensions (All dimensions are approximate. MSD II Body, 33R51 tires, unloaded machine.)
    Height - Top of ROPS - 17.09 ft - -
    Overall Body Length - 39.32 ft - -
    Inside Body Length - 27.29 ft - -
    Overall Length - 39.23 ft - -
    Wheel Base - 17 ft - -
    Rear Axle - Tail - 12.56 ft - -
    Ground Clearance - 3.29 ft - -
    Dump Clearance - 3.7 ft - -
    Loading Height - Empty - 17.39 ft - -
    Inside Body Depth - Maximum - 9.15 ft - -
    Overall Height - Body Raised - 39.48 ft - -
    Operating Width - 24.72 ft - -
    Centerline Front Tire Width - 15.91 ft - -
    Engine Guard Clearance - 3.41 ft - -
    Overall Canopy Width - 24.81 ft - -
    Outside Body Width - 22 ft - -
    Inside Body Width - 19.72 ft - -
    Front Canopy Height - 19.8 ft - -
    Rear Axle - Clearance - 3.25 ft - -
    Centerline of Rear Dual Tire Width - 14.06 ft - -
    Overall Tire Width - 20.59 ft - -

    Capacity - HP Body - 100% Fill Factor
    Struck - - 225 yd³ / 172 m³ -
    Heaped (SAE 2:1)* - - 330 yd³ / 252 m³ -
    Note (1) - - Consult your local Cat dealer for body recommendations. -

    Dimensions
    Rear Axle - Clearance - Loaded - - 3.08 ft -
    Inside Body Depth - Maximum - - 11 ft 5.7 ft
    Overall Height - Body Raised - - 51.5 ft 27.1 ft
    Loaded Ground Clearance - - 2.58 ft -
    Loading Height - Empty - - 23 ft 11.6 ft
    Engine Guard Clearance - Loaded - - 3.33 ft -
    Height - Top of ROPS - Empty - - 21.4 ft -
    Front Canopy Height - Empty - - 25.33 ft -
    Overall Body Length - - 48.6 ft 26.8 ft
    Inside Body Length - - 32.75 ft 19 ft
    Overall Length - - 49.5 ft 28.9 ft
    Wheel Base - - 23.58 ft 13 ft
    Rear Axle - Tail - - 12.9 ft 9.5 ft
    Dump Clearance - - 6.58 ft 1.5 ft
    Centerline Front Tire Width - - 21.41 ft 10.4 ft
    Overall Canopy Width - - 29.91 ft -
    Outside Body Width - - 32 ft 12.9 ft
    Inside Body Width - - 27.91 ft 11.9 ft
    Centerline of Rear Dual Tire Width - - 20.41 ft 8.7 ft
    Overall Tire Width - - 31.25 ft 12.9 ft
    Height - Top of ROPS - - - 12.8 ft
    Ground Clearance - - - 1.6 ft
    Operating Width - - - 15.7 ft
    Engine Guard Clearance - - - 2 ft
    Front Canopy Height - - - 13.7 ft
    Rear Axle - Clearance - - - 1.9 ft

    Capacity - Dual Slope - 100% Fill Factor
    Heaped 2:1 (SAE) - - - 40.8 yd³
    Struck - - - 31.3 yd³

    Capacity - Flat Floor - 100% Fill Factor
    Struck - - - 31.3 yd³
    Heaped 2:1 (SAE) - - - 40.9 yd³

    Sound
    Sound Standards (3) - - - Operator Equivalent Sound Pressure Level (Leq) is 78 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab.
    Sound Standards (2) - - - Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 118 dB(A).
    Sound Standards (1) - - - Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.
    Add a Similar Product:
    • 772G Off-Highway Truck Add
    • 775 Off-Highway Truck Add
    • 798 AC Electric Drive Mining Truck Add
    • 770 Off-Highway Truck Add
    • 796 AC Electric Drive Mining Truck Add
    • 794 AC Mining Truck Add
    • 793F Mining Truck Add
    • 789 Next Generation Add