CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    775G Off-Highway Truck
    View Product
    797F Mining Truck
    View Product Remove
    772G Off-Highway Truck
    View Product Remove
    785 Mining Truck (LRC, Tier 4 Final / EU Stage V)
    View Product Remove

    Weights
    LRC Bare Chassis Weight without Hoist 75118 lb - 58414 lb -
    LRC Bare Chassis Weight with Hoist 76326 lb - 59223 lb -
    LRC Gross Vehicle Weight (Target) without Hoist 246503 lb - 180999 lb -
    LRC Gross Vehicle Weight (Target) with Hoist 246503 lb - 180999 lb -
    HRC Bare Chassis Weight without Hoist 76573 lb - 59567 lb -
    HRC Bare Chassis Weight with Hoist 77781 lb - 60376 lb -
    HRC Gross Vehicle Weight (Target) without Hoist 246503 lb - 180999 lb -
    HRC Gross Vehicle Weight (Target) with Hoist 246503 lb - 180999 lb -
    Note LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. - LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. -

    ROPS
    Tractor ROPS 85288 lb - 77430 lb -

    Operating Specifications
    Nominal Water Tank Capacity 15000 gal (US) - 11000 gal (US) -

    Steering
    Steering Standards ISO 5010:2007 ISO 5010:2007 ISO 5010:2007 ISO 5010:2007
    Steer Angle 31 ° - 31 ° 36 °
    Turning Diameter 77.1 ft - 57.7 ft -
    Turning Circle - Clearance Diameter 85.6 ft - 66.6 ft -
    Steering Angle - 40 ° - -
    Turning Diameter - Front - 122.7 ft - -
    Note - Turning Diameter (ISO 7457:2009) - -
    Turning Diameter - ISO 7457:1997 (33.00R51 tires) - - - 97.75 ft

    Engine
    Engine Model Cat® C27 Cat® C175-20 Cat® C18 Cat� 3512E
    Gross Power - SAE J1995 825 HP 4000 HP 605 HP 1600 HP
    Rated Net Power - SAE J1349 683 HP - 550 HP -
    Bore 5.4 in 6.9 in 5.7 in 6.7 in
    Stroke 6 in 8.7 in 7.2 in 8.5 in
    Displacement 1648 in³ 6469 in³ 1105 in³ 3573 in³
    Note Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model. - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. -
    Net Power - SAE J1349 - 3795 HP - 1509 HP
    Rated Speed - 1750 r/min - -
    Emissions - U.S. EPA Compliant. Where applicable, the Cat C175-20 engine is compliant with U.S. EPA emission standards.Tier 4 engine option available to meet Tier 4 Final emission standards. - -
    Note (1) - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
    Note (2) - U.S. EPA Tier 4 Final available for applicable markets. - U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.
    Note (3) - High Altitude Low Maintenance Ratio Engine Configuration (4x4) option available. - Additional fuel optimized selectable power ratings: 1,450 hp
    Rated Engine Speed - - 1700 r/min -
    Number of Cylinders - - 6 -
    Emissions Rating - - - Fuel Optimized

    Transmission
    Forward - 1 6.6 mile/h 6.6 mile/h 8 mile/h 7.5 mile/h
    Forward - 2 9.3 mile/h 8.9 mile/h 10.9 mile/h 10.2 mile/h
    Forward - 3 12.6 mile/h 12 mile/h 14.8 mile/h 13.8 mile/h
    Forward - 4 16.8 mile/h 16.2 mile/h 19.8 mile/h 18.6 mile/h
    Forward - 5 22.8 mile/h 21.8 mile/h 26.9 mile/h 25.2 mile/h
    Forward - 6 30.7 mile/h 29.4 mile/h 36.2 mile/h 34 mile/h
    Forward - 7 41.6 mile/h 39.5 mile/h 49.2 mile/h -
    Reverse 8.7 mile/h 7.4 mile/h 10.4 mile/h 6.8 mile/h
    Note Maximum travel speeds with standard 24.00R35 (E4) tires - Maximum travel speeds with standard 21.00R33 (E4) tires. Maximum travel speeds with standard 33.00-R51 tires.
    Top Speed - Loaded - 39.5 mile/h - 34 mile/h

    Brakes
    Brake Surface - Front 257 in² - 216 in² -
    Brake Surface - Rear 9497 in² - 7794 in² -

    Service Refill Capacities
    Fuel Tank Capacity 210 gal (US) - 140 gal (US) -
    Cooling System 45 gal (US) 306 gal (US) 33 gal (US) 100 gal (US)
    Crankcase 24 gal (US) 103 gal (US) 17 gal (US) 54 gal (US)
    Differential - Final Drives 38 gal (US) - 47 gal (US) 139 gal (US)
    Steering System - Including Tank 14 gal (US) 95 gal (US) 60 gal (US) -
    Brake/Hoist Hydraulic Tank 46.5 gal (US) - 38 gal (US) -
    Brake Hoist System 85 gal (US) - 60 gal (US) -
    Fuel Tank - 1000 gal (US) - 410 gal (US)
    Fuel Tank (Tier 4) - 1200 gal (US) - -
    Diesel Exhaust Fluid Tank - 100 gal (US) - 36 gal (US)
    Front Wheels - Each - 16 gal (US) - 8 gal (US)
    Differentials - 330 gal (US) - -
    Steering Tank - 67 gal (US) - 29 gal (US)
    Brake/Hoist Tank - 203 gal (US) - 135 gal (US)
    Brake Hoist System - Includes Tank - 489 gal (US) - 160 gal (US)
    Torque Converter Sump - 80 gal (US) - -
    Torque Converter/Transmission System - Including Sump - 166 gal (US) - -
    Note (1) - DEF Tank only available for EPA Tier 4 engine option. - -
    Torque Converter - Transmission System - - 17 gal (US) -
    Steering System - Includes Tank - - - 45 gal (US)
    Torque Converter - Transmission System - Including Sump - - - 46 gal (US)

    Weights - Approximate
    Nominal Rated Payload - 400 ton (US) - -
    Rated Gross Machine Weight - 1375000 lb - -
    Chassis Weight - 474472 lb - -
    Body Weight - 94799 lb - 57779 lb
    Note (1) - Consult your tire manufacturer for maximum tire load - Consult your tire manufacturer for maximum tire load
    Note (2) - Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. - Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
    Note (4) - Tier 4 Chassis Weight: 486263 lb (220565 kg) - -
    Nominal Rated Payload (33.00R51 Tires) - - - 153 ton (US)
    Rated Gross Machine Weight (33.00R51 tires) - - - 550000 lb
    Nominal Rated Payload (36.00R51 Tires) - - - 157 ton (US)
    Rated Gross Machine Weight (36.00R51 tires) - - - 564000 lb
    Chassis Weight (33.00R51 Tires) - - - 186799 lb
    Chassis Weight (36.00R51 Tires) - - - 193192 lb
    Note (3) - - - Body weight varies depending on body selection and configuration.

    Body Hoists
    Type - Twin, two-stage hydraulic cylinders with snubbing valve. - Twin, two-stage hydraulic cylinders with snubbing valve.
    Pump Flow - High Idle - 317 gal/min - 192.7 gal/min
    Relief Valve Setting - Raise - 3510 psi - 2500 psi
    Body Raise Time - High Idle - 25 s - 15.2 s
    Body Lower Time - Float - 18 s - -
    Body Power Down- High Idle - 18 s - 15.9 s
    Body Lower Time - Float High Idle - - - 15.9 s
    Body Lower Time - Float Low Idle - - - 16.2 s

    Suspension
    Type - Self-contained nitrogen/oil cylinders, rear strut pin-to-pin mounting, top & bottom double shear clevis attachments - Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
    Effective Cylinder Stroke - Front - 3.9 in - 12.6 in
    Effective Cylinder Stroke - Rear - 3.7 in - 6.5 in
    Rear axle - Oscillation - ±3.96 degrees - +/- 5 degrees

    Weight Distributions - Approximate
    Front Axle - Empty - 47.20% - 48%
    Rear Axle - Empty - 52.80% - 52%
    Front Axle - Loaded - 33.30% - 33%
    Rear Axle - Loaded - 66.70% - 67%
    Note - Weight distributions optimized with Cat body. - Weight distributions optimized with Cat body.

    Final Drives
    Type - Double reduction, planetary with full floating axles. - Double reduction, planetary with full floating axles.
    Differential Ratio - 1.276:1 - 2:10:01
    Planetary Ratio - 16.67:1 - 10.83:1
    Total Reduction Ratio - 21.26:1 - 22.75:1
    Note - Double reduction, planetary with full floating axles. - -

    Tires
    Tires - 59/80 R63 - -
    Rims - 44" x 63" - 610 mm (24") Rims (standard). 660 mm (26") Rims (optional).
    Note - Quick Change Rims optional. - -
    Note (1) - Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. - Quick Change Rims optional.
    Standard Tire - - - 33.00R51
    Optional Tire - - - 36.00R51
    Note (2) - - - Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.

    Braking System
    Service Brakes - Service Brakes: Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated - Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
    Front Wet Disc Brake Surface Area - 20500 in² - 9487 in²
    Rear - Wet Disc Brake Surface Area - 30750 in² - 13908 in²
    Standards - Service and Secondary: ISO 3450:2011 - Service and Secondary: ISO 3450:2011
    Parking Brake - Four-corner, Multi-disc, Spring Applied, Hydraulically Released - Four corner, multi disc, spring applied, hydraulically released
    Load Brake - Rear service brakes - -
    Note - Anti-Lock Brake System (ABS) optional with CMD package - -

    Capacity - HP Body - 100% Fill Factor
    Struck - 225 yd³ / 172 m³ - -
    Heaped (SAE 2:1)* - 330 yd³ / 252 m³ - -
    Note (1) - Consult your local Cat dealer for body recommendations. - -

    Cab
    Air Conditioning - HFC - 134A refrigerant: 24,300 Btu/h - HFC - 134A refrigerant: 24,500 Btu/h
    Heater / Defroster - 38900 Btu/h - 33300 Btu/h
    Note - Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning. - The operator sound pressure level, 77 dB(A) with direct drive and 75 dB9A) with optional clutch, tested to ISO 6396:2008.
    ROPS Standards (1) - The operator sound pressure level, 76 dB(A), complies with ISO 6394:2008 and ISO 6396:2008. - ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
    ROPS Standards (2) - ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria. - -
    FOPS Standards - FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria. - FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.

    Dimensions
    Rear Axle - Clearance - Loaded - 3.08 ft - -
    Inside Body Depth - Maximum - 11 ft - -
    Overall Height - Body Raised - 51.5 ft - -
    Loaded Ground Clearance - 2.58 ft - -
    Loading Height - Empty - 23 ft - -
    Engine Guard Clearance - Loaded - 3.33 ft - -
    Height - Top of ROPS - Empty - 21.4 ft - -
    Front Canopy Height - Empty - 25.33 ft - -
    Overall Body Length - 48.6 ft - -
    Inside Body Length - 32.75 ft - -
    Overall Length - 49.5 ft - -
    Wheel Base - 23.58 ft - -
    Rear Axle - Tail - 12.9 ft - -
    Dump Clearance - 6.58 ft - -
    Centerline Front Tire Width - 21.41 ft - -
    Overall Canopy Width - 29.91 ft - -
    Outside Body Width - 32 ft - -
    Inside Body Width - 27.91 ft - -
    Centerline of Rear Dual Tire Width - 20.41 ft - -
    Overall Tire Width - 31.25 ft - -

    Capacity - MSD II - 100% Fill Factor
    Struck - - - 72 m^3 / 94 yd^3
    Heaped (SAE 2:1) - - - 99 m^3 / 129 yd^3
    Note - - - Consult your local Cat dealer for body recommendations.

    Dimensions (All dimensions are approximate. MSD II Body, 33R51 tires, unloaded machine.)
    Height - Top of ROPS - - - 17.09 ft
    Overall Body Length - - - 39.32 ft
    Inside Body Length - - - 27.29 ft
    Overall Length - - - 39.23 ft
    Wheel Base - - - 17 ft
    Rear Axle - Tail - - - 12.56 ft
    Ground Clearance - - - 3.29 ft
    Dump Clearance - - - 3.7 ft
    Loading Height - Empty - - - 17.39 ft
    Inside Body Depth - Maximum - - - 9.15 ft
    Overall Height - Body Raised - - - 39.48 ft
    Operating Width - - - 24.72 ft
    Centerline Front Tire Width - - - 15.91 ft
    Engine Guard Clearance - - - 3.41 ft
    Overall Canopy Width - - - 24.81 ft
    Outside Body Width - - - 22 ft
    Inside Body Width - - - 19.72 ft
    Front Canopy Height - - - 19.8 ft
    Rear Axle - Clearance - - - 3.25 ft
    Centerline of Rear Dual Tire Width - - - 14.06 ft
    Overall Tire Width - - - 20.59 ft
    Add a Similar Product:
    • 775 Off-Highway Truck Add
    • 772 (07) Off-Highway Truck Add
    • 798 AC Electric Drive Mining Truck Add
    • 770 Off-Highway Truck Add
    • 796 AC Electric Drive Mining Truck Add
    • 794 AC Mining Truck Add
    • 793F Mining Truck Add
    • 789 Next Generation Add